Results 1 to 5 of 5
-
January 5th, 2020, 04:12 PM #1Active Member
- Join Date
- Mar 2013
- Location
-
Manheim, PA 17545,
Pennsylvania
(Lancaster County) - Posts
- 239
- Rep Power
- 1099223
Rifle stock refinishing in the Lancaster-Lebanon area?
I bought a Ruger 10/22 with a distributor exclusive Mannlicher-style stock on it. Ruger must've had water or some sort of contaminant in their varnish when it was applied because it is very milky and hazy. I tried to buff a spot and also used a heat gun to see what would happen. No change. The wood underneath is fine, it's just the clear varnish that is defective. Since it was a distributor exclusive from about 5 years ago, getting a replacement from Ruger is impossible. It will have to be refinished. I'm looking for recommendations for folks that do quality stock refinishing in the Lancaster-Lebanon area.
Thanks-
-Ethan.
-
January 13th, 2020, 09:35 PM #2
Re: Rifle stock refinishing in the Lancaster-Lebanon area?
You can do it.
I use stuff from https://www.doctorswoodshop.com/Think twice, shoot once.
-
January 13th, 2020, 10:51 PM #3Active Member
- Join Date
- Mar 2013
- Location
-
Manheim, PA 17545,
Pennsylvania
(Lancaster County) - Posts
- 239
- Rep Power
- 1099223
Re: Rifle stock refinishing in the Lancaster-Lebanon area?
I'm considering it, but I am also really afraid of messing something up!
-
January 17th, 2020, 08:31 PM #4Grand Member
- Join Date
- Aug 2008
- Location
-
DeepInTheWoods,
Pennsylvania
(Warren County) - Posts
- 2,429
- Rep Power
- 21474854
-
January 20th, 2020, 11:51 PM #5Junior Member
- Join Date
- Oct 2019
- Location
-
York,
Pennsylvania
(York County) - Posts
- 4
- Rep Power
- 0
Similar Threads
-
AR Lower Engraving - Near Lebanon/Lancaster Area
By sohryu76 in forum GunsmithsReplies: 2Last Post: April 17th, 2018, 01:24 PM -
Gunsmith - Stock Work - Lancaster/Lebanon area
By keystoneman 85 in forum GunsmithsReplies: 1Last Post: April 13th, 2016, 07:46 PM -
Lancaster/Lebanon area Varmint hunting?!?Anybody?
By SharpShooter88 in forum HuntingReplies: 1Last Post: December 3rd, 2010, 06:17 PM -
.223 / 5.56 Ammo Recon, Lebanon, Lancaster Area
By sjl127 in forum GeneralReplies: 3Last Post: February 15th, 2008, 12:33 PM
Bookmarks