Results 1 to 3 of 3
-
December 12th, 2019, 10:14 PM #1
DIY Flush Fit 7+1 Magazine for Remington 870
Have you ever wanted a magazine extension that sits flush with the muzzle on your 18" 870? Have you ever wished you could fit that seventh shell in there? Well, I got an old beat up Choate +3 off of ebay last week and decided I'd make myself a custom extension. I put some masking tape on the extension so I knew where to cut, put it in a vise, and used a pipe cutter to trim it and crimp the edge to retain the cap.
The gun assembled and function tested; it holds 7 shells with a little room to spare which hopefully accommodates the slightly longer Federal buckshot I use for defense. I used a Nordic Components follower and Wolff magazine spring cut to 30". You'll notice that this extension has a glossy finish and the rest of my 870 is bead blasted matte black ...
Well, it took a few tries to get my compressor running because it's been absurdly cold out but I got it going, blasted the extension, and blued it. The new matte black finish compared to the god awful glossy finish. I'm hoping for better weather tomorrow so I can get some photos of the 870 with it installed.
-
December 14th, 2019, 07:06 PM #2Junior Member
- Join Date
- Oct 2018
- Location
-
south western,
Pennsylvania
(Beaver County) - Posts
- 5
- Rep Power
- 0
Re: DIY Flush Fit 7+1 Magazine for Remington 870
I likey!
-
December 14th, 2019, 07:10 PM #3
Re: DIY Flush Fit 7+1 Magazine for Remington 870
Nice work!
RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
Similar Threads
-
Level of Interest In Flush Fit Magazine Extension for 18 1/2" 870?
By Misery Loves Shotguns in forum ShotgunsReplies: 9Last Post: April 17th, 2014, 11:33 PM -
Mini-14 Magazine & Remington 760 Magazine (Delaware County)
By andrewjs18 in forum GeneralReplies: 1Last Post: December 13th, 2008, 02:53 AM
Bookmarks