Pennsylvania Firearm Owners Association
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2009
    Location
    Ambridge, Pennsylvania
    (Beaver County)
    Age
    33
    Posts
    1,413
    Rep Power
    5297522

    Default DIY Flush Fit 7+1 Magazine for Remington 870

    Have you ever wanted a magazine extension that sits flush with the muzzle on your 18" 870? Have you ever wished you could fit that seventh shell in there? Well, I got an old beat up Choate +3 off of ebay last week and decided I'd make myself a custom extension. I put some masking tape on the extension so I knew where to cut, put it in a vise, and used a pipe cutter to trim it and crimp the edge to retain the cap.




    The gun assembled and function tested; it holds 7 shells with a little room to spare which hopefully accommodates the slightly longer Federal buckshot I use for defense. I used a Nordic Components follower and Wolff magazine spring cut to 30". You'll notice that this extension has a glossy finish and the rest of my 870 is bead blasted matte black ...



    Well, it took a few tries to get my compressor running because it's been absurdly cold out but I got it going, blasted the extension, and blued it. The new matte black finish compared to the god awful glossy finish. I'm hoping for better weather tomorrow so I can get some photos of the 870 with it installed.

    Hope this is not Chris's blood ...

  2. #2
    Join Date
    Oct 2018
    Location
    south western, Pennsylvania
    (Beaver County)
    Posts
    4
    Rep Power
    0

    Default Re: DIY Flush Fit 7+1 Magazine for Remington 870

    I likey!

  3. #3
    Join Date
    Oct 2006
    Location
    Brookville, Pennsylvania
    (Jefferson County)
    Age
    47
    Posts
    18,894
    Rep Power
    21474868

    Default Re: DIY Flush Fit 7+1 Magazine for Remington 870

    Nice work!
    RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J.

    Don't end up in my signature!

Similar Threads

  1. Level of Interest In Flush Fit Magazine Extension for 18 1/2" 870?
    By Misery Loves Shotguns in forum Shotguns
    Replies: 9
    Last Post: April 17th, 2014, 11:33 PM
  2. Replies: 1
    Last Post: December 13th, 2008, 02:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops