Pennsylvania Firearm Owners Association
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 41
  1. #21
    Join Date
    Sep 2011
    Location
    Mt. Pleasant
    Posts
    2,437
    Rep Power
    21474851

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by ExFlyinguy View Post
    I hope the ATF doesn't do what they did to the "Safety Harbor" .50BMG uppers
    The reason the 50 uppers were deemed firearms is it doesnt require the lower to feed ammo nor need the lower to cycle the action and function safely. (You could hit it with a hammer to set the round off and it wouldnt blow apart like a 556 upper would) they have made some belt fed uppers the registered part in some cases.

  2. #22
    Join Date
    Feb 2007
    Location
    Apolacon Township, Pennsylvania
    (Susquehanna County)
    Age
    77
    Posts
    5,797
    Rep Power
    21474859

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by GunLawyer001 View Post
    Congress changed the law to eliminate the self-incrimination aspect of that, right after the case.
    I wish I could understand how? Is that the reason the are virtually NO prosecutions for those prohibited persons who lie on the 4473? It is not a criminal act?


    "Those who can make you believe absurdities can make you commit atrocities".

  3. #23
    Join Date
    Oct 2006
    Location
    Cherry Tree, Pennsylvania
    (Indiana County)
    Age
    76
    Posts
    5,488
    Rep Power
    21474859

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by Brick View Post
    Is that the reason thereare virtually NO prosecutions for those prohibited persons who lie on the 4473?
    The reason for the lack of prosecutions is that these are not glamorous, headline-grabbing crimes. I guess the feds view it as a nickle-and-dime crime.

    As for the so-called 80% lowers, if I'm reading this correctly neither the lower nor upper are, individually, firearms. Only when combined do they jointly meet the definition of a firearm. This is going to drive states such as New York and New Jersey totally bonkers in the hands of a good gun lawyer.

  4. #24
    Join Date
    Oct 2007
    Location
    Moscow, Pennsylvania
    (Lackawanna County)
    Posts
    269
    Rep Power
    21474853

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    So are ATF heads going to explode when they realize on many pistols now have only a tiny metal part (with a serial number on it) that actually "is" the pistol? Like, the Sig pistols? So a tiny stamped sheet metal thingie is a "pistol"? Starts getting really deep when you get into modular firearms.

    Let's say we put that Sig serial numbered part into a modular frame that makes it now "rifle sized". Is the Sig "pistol" now a rifle? What if we bought the little metal part alone, like an AR lower? Is it simply a "firearm"? Is hammering out a tiny bar of metal constitute "making" a firearm?

  5. #25
    Join Date
    Jan 2007
    Location
    Mount Wolf, Pennsylvania
    (York County)
    Posts
    431
    Rep Power
    324518

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    http://www.captainsjournal.com/2019/...f-regulations/

    Just another link to the article. I don't know how different it is from the original, but wanted to put it out there.
    RETIRED Captain, 45th PVI Co. K find us on FB

  6. #26
    Join Date
    Sep 2010
    Location
    ., Pennsylvania
    Posts
    2,718
    Rep Power
    21474852

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by GunLawyer001 View Post
    The defendant was handing completed rifles to people, that he built himself, without an FFL or SOT.

    Having customers push the CAM button using his program on his machine is not a defense.

    Charging them $25 to "join his club" is nonsense and legally irrelevant; it doesn't matter if he manufactures for the general public or club members or just his family, he's making guns for other people for money.

    The FAL also has 2 receiver parts. The M-60 GPMG has 4, including the trunion and rails. A Ruger Mark II has the working parts allocated between the upper and the frame. So does the 1911. And others.

    One solution to this is to deem any assembled receiver components as "the receiver", which would allow anyone to buy uppers and lowers through the mail, but once all the parts were together a prohibited person has committed a felony. Kind of like the M1 carbine conversion parts are a machinegun if you have all 7 parts.

    I honestly don't know how often tracing a gun has solved a crime. Most criminals are morons, but even they know enough not to leave guns behind that can be traced to them. Guns left at the scene probably trace back to the last guy who bought them legally, until his house was burglarized and then the trail is gone. Not sure how that's the key piece of evidence, that the gun used to kill M'orawn Jackson was stolen 5 years ago from some dude 100 miles away.
    it does help them gain metrics like this. and we know how the .gov loves their tracking metrics.
    https://www.kspr.com/content/news/Gr...470175933.html
    A gun that was stolen over thirty years ago in another state is off the streets tonight. Greene County deputies recovered the .22 caliber revolver after stopping a driver who was suspected of driving under the influence. After the stop, the man took off on foot, but was caught a short time later.

    When they searched the vehicle, deputies found the loaded gun under the driver's seat. It had been stolen from North Riverside, Ill. in 1984.

    Once the suspect's court case has wrapped up, the sheriff's office will work to return the gun to its right owner.
    .
    There is no way to make it out alive...

  7. #27
    Join Date
    Jan 2013
    Location
    ..., Pennsylvania
    (Juniata County)
    Posts
    4,418
    Rep Power
    21474852

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by fallenleader View Post
    it does help them gain metrics like this. and we know how the .gov loves their tracking metrics.
    https://www.kspr.com/content/news/Gr...470175933.html
    .
    This is a fascinating case, telling us more about the ATF and their world view than anything to do with lower receivers. Read every word of the report.

    For more than a year, Joseph Roh illegally manufactured AR-15-style rifles in a warehouse south of Los Angeles.

    His customers, more than two dozen of whom were legally prohibited from possessing a firearm, could push a button, pull a lever, and walk away a short time later with a fully assembled, untraceable semi-automatic weapon for about $1,000, according to court records.

    Roh continued his black-market operation despite being warned in person by agents from the Bureau of Alcohol, Tobacco, Firearms and Explosives that he was breaking the law.

    But five years after raiding his business and indicting him, federal authorities quietly cut a deal with Roh earlier this year and agreed to drop the charges.

    Why?

    The judge in the case had issued a tentative order that, in the eyes of prosecutors, threatened to upend the decades-old Gun Control Act and “seriously undermine the ATF’s ability to trace and regulate firearms nationwide.”

    In the eyes of prosecutors, the case “threatened to upend the decades-old Gun Control Act and seriously undermine the ATF’s ability to regulate firearms nationwide.” This is important.

    No one can change the law except those who made the law, i.e., the House and Senate. It may be that the GCA is reprehensible, and it is, and it may be that it is unconstitutional, and it is, but only the House and Senate can change it. The fear that losing a case, whatever that case may be, could upend the GCA is ridiculous. Ponder that for a moment and let’s continue.

    A case once touted by prosecutors as a crackdown on an illicit firearms factory was suddenly seen as having the potential to pave the way to unfettered access to one of the most demonized guns in America.

    Federal authorities preferred to let Roh go free rather than have the ruling become final and potentially create case law that could have a crippling effect on the enforcement of gun laws, several sources familiar with the matter told CNN. Each requested anonymity due to the sensitive nature of the case and its possible implications.

    Under US District Court Judge James V. Selna’s interpretation of the law, convicted felons and other people prohibited from possessing firearms would be allowed to legally acquire all the parts necessary to assemble an AR-15-style rifle and other weapons, according to federal prosecutors.

    [ … ]

    The guns are sometimes assembled from separately acquired parts. Under federal law, the one regulated individual part of a firearm is what’s known as the frame or receiver — a piece that, among other things, provides a housing for the hammer and firing mechanism of a gun.

    Though incapable of firing a round, the part is considered a gun in its own right and is subject to the same restrictions as a fully intact firearm. Manufacturers must stamp it with a serial number and licensed dealers are required to conduct background checks on prospective buyers. The restrictions are intended, in part, to keep felons and other people prohibited from possessing firearms from acquiring them piece by piece.

    AR-15s, however, do not have a single receiver that meets that definition. They have both an upper and lower receiver — two parts as opposed to the single part described in the law.

    At issue in Roh’s case was whether the law could fairly be interpreted to apply to just the lower receiver of the AR-15, as the ATF has been doing for decades.

    To rule otherwise “would sweep aside more than 50 years of the ATF’s regulation of AR-15s and other semiautomatic firearms,” prosecutors wrote prior to the judge’s order.

    Federal law enforcement officials — and members of Congress — have been on notice about a potential problem with the language in federal gun law as applied to AR-15s since at least 2016.

    In July of that year, prosecutors in Northern California abandoned a case against a convicted felon named Alejandro Jimenez after a judge found that the AR-15 lower receiver he was accused of purchasing in an ATF undercover sting did not meet the definition of a receiver under the law.

    The ruling and subsequent dismissal drew little notice but prompted a letter to Congress from then-US Attorney General Loretta Lynch. She advised lawmakers that the judge’s decision was not suitable for appeal and that if ATF officials believed the definition should be changed, they should pursue regulatory or administrative action.

    Further into the report, we get to the details of the case.

    “We here at ROHG Industries have been doing build parties for quite some time,” he wrote in the sparsely worded, one-paragraph letter.

    “The customer installs the part into our machine and pushes the start button,” Roh explained.

    “Is this legal?” he asked.

    In November, the chief of ATF’s Firearms Technology Branch responded to Roh by letter. He told him that if the “build parties” he was referring to resulted in the production of anything the ATF classified as a firearm, he would need to obtain a license for manufacturing.

    Roh did not heed that advice. When an undercover ATF agent visited his factory on two occasions in December, he “observed parts and machinery used to manufacture AR-15-type firearms,” court documents state.

    Two days before Christmas, the ATF gave Roh a warning in the form of a “cease and desist” letter. It informed him that he was engaged in the unlicensed manufacture of firearms and was at risk of criminal prosecution.

    This time, Roh appeared to take heed.

    When undercover agents visited his factory in early January, he was not there. But employees told agents they were no longer machining gun parts.

    “The ATF had shut them down,” the employees said, according to a report recounting the conversation.

    They promised to call the purported customers back when they got the “green light” to resume operations.

    Less than a week later they got the call. Their visit to the factory the following day was captured in secretly recorded video obtained by CNN.

    Roh, dressed in a T-shirt and New York Yankees baseball cap, appeared congenial and knowledgeable about firearms. He made no secret of his business model.

    “Are you here to … make yourself a rifle right now?” he asked the agents during the encounter in January 2014.

    “I’m not going to get into trouble or anything like that?” one of the agents asked.

    “No,” Roh reassured him. “We’re legal, man.”

    Roh told the undercover agents he’d enacted a new policy after being shut down by the ATF: Anyone who wanted machining services performed had to pay a $25 fee to join his “gun club.” That way, he was no longer catering to the general public, he explained.

    He told one of the agents he was already considered a member because he’d bought a gun before. Roh told him he would have to vouch for the newcomer so that he could join the gun club as well.

    After collecting $25 from the new customer and agreeing to a price of $1,000 each for a pair of rifles he wanted to buy, Roh directed an employee to begin the machining process.

    Moments later, he stood next to the agent in front of a large piece of equipment that is computer-coded to precisely machine parts for AR-15-style firearms.

    “Go ahead and press the green button,” Roh told the undercover agent.

    “The green button?” the agent asked.

    “Yeah,” Roh replied. “That basically means that you did it — believe it or not.”

    A member of Roh’s staff then oversaw the process of machining and drilling that converted an unfinished lower receiver — an innocuous chunk of metal before the process began — into a finished receiver the ATF considered a firearm under the law.

    Roh then added barrels, stocks, bolts, triggers and other parts to make them fully-functioning weapons.

    Now to the legal machinations.

    When the case finally came to trial last year, much of the four-day proceeding consisted of Nicolaysen, Roh’s defense attorney, grilling ATF officials on arcane gun laws and regulations and the agency’s internal decision-making process.

    After both sides presented their evidence, the defense filed a motion for acquittal, arguing that the government’s case against Roh was “legally flawed” because the charges were based on a violation of an internal ATF “classification” as opposed to federal law.

    Nicolaysen argued that the definition of a receiver under the relevant federal code differed in various ways from the AR-15 component Roh was accused of manufacturing.

    Under the US Code of Federal Regulations, a firearm frame or receiver is defined as: “That part of a firearm which provides housing for the hammer, bolt or breechblock, and firing mechanism, and which is usually threaded at its forward portion to receive the barrel.”

    The lower receiver in Roh’s case does not have a bolt or breechblock and is not threaded to receive the barrel, Nicolaysen noted.

    He called the decision to classify it as a firearm nonetheless, the result of “secret, in-house decision-making.”

    Nicolaysen accused the ATF of abusing its authority by pursuing Roh based on his alleged violation of a policy “that masquerades as law.”

    He asked the judge to consider recommending that then-US Attorney General Jeff Sessions conduct a review to determine whether there were any similar cases pending around the country or past convictions “sustained on the basis of ATF policy, rather than law.”

    Prosecutors acknowledged there were technical differences between the regulation and the lower receiver in Roh’s case, but said the ATF’s interpretation of the regulation was consistent with the intent of federal gun laws. The agency’s reading of the law “should also receive deference from this court,” prosecutors Shawn J. Nelson and Benjamin D. Lichtman argued.

    Adopting the defense position, the prosecutors wrote, would be “manifestly incompatible” with the intent of the federal Gun Control Act and would “severely frustrate” enforcement of the law.

    The prosecutors’ filing said a ruling in favor of the defense could impact the receivers for up to 90% of the firearms in America.

    “The necessary result of this would be that the unregulated parts could be manufactured, sold, and combined with other commercially available parts to create completed, un-serialized firearms which would not be subject to background checks, and which would be untraceable,” the prosecutors wrote. “Defendant’s interpretation would mean that nearly every semi-automatic firearm could be purchased piece by piece with no regulation or background check before a prohibited person would have a firearm.”

    Though the trial lasted less than a week, Selna deliberated for more than year. In April, he issued a tentative order in which he determined that the ATF had improperly classified the AR-15 lower receivers in Roh’s case as firearms.

    He rejected the prosecution’s argument that the ATF’s interpretation of the regulation describing a receiver could reasonably be applied to the device at issue in Roh’s case.

    “There is a disconnect,” the judge wrote.

    Selna added that the combination of the federal law and regulation governing the manufacturing of receivers is “unconstitutionally vague” as applied in the case against Roh.

    “No reasonable person would understand that a part constitutes a receiver where it lacks the components specified in the regulation,” Selna wrote.

    Therefore, the judge determined, “Roh did not violate the law by manufacturing receivers.”

    The judge’s tentative order also found that the ATF’s in-house classification process failed to comply with federal rule-making procedures. Changes to substantive federal regulations typically include a notice-and-comment period and eventual publication in the Federal Register.

    “Consistent with the intent of federal law.” What the ATF doesn’t want the general public to know is that they’re making up the rules as they go. Letters to the ATF and ATF responses don’t constitute law, and they don’t even constitute regulation, strictly defined.

    First of all, I’ve discussed that before. There is a difference between law and regulation. Laws are made by Congress. Regulation, that behemoth which has so empowered the federal executive and the bureaucratic state, at least has the requirement that it gets published in the federal register, has a comment period, goes through a cost-benefit analysis as required by law, and then the final version gets published in the federal register. ATF regulations get none of this, and judgments and rules promulgated by the ATF bypass all of these requirements.

    Second, it’s apparent that the whole intent of the ATF rules is to limit the firearms in circulation, attempt as best as possible to govern who has them, and know with as much certainty as possible where they are at any particular time. The rules aren’t arbitrary – they have the purpose the controllers intended. They make the policy as it suits them at the moment, and then change it on a whim if they deem it more advantageous to their designs. For a silly example of this, witness their hand-wringing and rule du jour over whether you can legally shoulder a stabilizing brace.

    Third, they are so afraid that this decision would have disrupted those designs that they were willing to drop the case outright. After hearing the truth from this judge, that is, that the ATF was illegally bypassing the regulation process and imposing seemingly arbitrary policies in lieu of real regulations and laws, they literally don’t care. They are completely unmoved by the revelations of their illegality.

    Fourth, the ATF is run by controllers. We’ve also discussed this before. As I’ve pointed out before, “The desire to control others is the first sign, incorrigible pathology and premier sin of the wicked.” These folks are sociopaths. They have no conscience, and their pathological drive is to control others.
    "Cives Arma Ferant"

    "I know I'm not James Bond, that's why I don't keep a loaded gun under the pillow, or bang Russian spies on a regular basis." - GunLawyer001

  8. #28
    Join Date
    Feb 2007
    Location
    next to my neighbor, Pennsylvania
    Posts
    13,589
    Rep Power
    21474867

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by PAMedic=F|A= View Post
    This is a fascinating case, telling us more about the ATF and their world view than anything to do with lower receivers. Read every word of the report.

    For more than a year, Joseph Roh illegally manufactured AR-15-style rifles in a warehouse south of Los Angeles.

    His customers, more than two dozen of whom were legally prohibited from possessing a firearm, could push a button, pull a lever, and walk away a short time later with a fully assembled, untraceable semi-automatic weapon for about $1,000, according to court records.

    Roh continued his black-market operation despite being warned in person by agents from the Bureau of Alcohol, Tobacco, Firearms and Explosives that he was breaking the law.

    But five years after raiding his business and indicting him, federal authorities quietly cut a deal with Roh earlier this year and agreed to drop the charges.

    Why?

    The judge in the case had issued a tentative order that, in the eyes of prosecutors, threatened to upend the decades-old Gun Control Act and “seriously undermine the ATF’s ability to trace and regulate firearms nationwide.”

    In the eyes of prosecutors, the case “threatened to upend the decades-old Gun Control Act and seriously undermine the ATF’s ability to regulate firearms nationwide.” This is important.

    No one can change the law except those who made the law, i.e., the House and Senate. It may be that the GCA is reprehensible, and it is, and it may be that it is unconstitutional, and it is, but only the House and Senate can change it. The fear that losing a case, whatever that case may be, could upend the GCA is ridiculous. Ponder that for a moment and let’s continue.

    A case once touted by prosecutors as a crackdown on an illicit firearms factory was suddenly seen as having the potential to pave the way to unfettered access to one of the most demonized guns in America.

    Federal authorities preferred to let Roh go free rather than have the ruling become final and potentially create case law that could have a crippling effect on the enforcement of gun laws, several sources familiar with the matter told CNN. Each requested anonymity due to the sensitive nature of the case and its possible implications.

    Under US District Court Judge James V. Selna’s interpretation of the law, convicted felons and other people prohibited from possessing firearms would be allowed to legally acquire all the parts necessary to assemble an AR-15-style rifle and other weapons, according to federal prosecutors.

    [ … ]

    The guns are sometimes assembled from separately acquired parts. Under federal law, the one regulated individual part of a firearm is what’s known as the frame or receiver — a piece that, among other things, provides a housing for the hammer and firing mechanism of a gun.

    Though incapable of firing a round, the part is considered a gun in its own right and is subject to the same restrictions as a fully intact firearm. Manufacturers must stamp it with a serial number and licensed dealers are required to conduct background checks on prospective buyers. The restrictions are intended, in part, to keep felons and other people prohibited from possessing firearms from acquiring them piece by piece.

    AR-15s, however, do not have a single receiver that meets that definition. They have both an upper and lower receiver — two parts as opposed to the single part described in the law.

    At issue in Roh’s case was whether the law could fairly be interpreted to apply to just the lower receiver of the AR-15, as the ATF has been doing for decades.

    To rule otherwise “would sweep aside more than 50 years of the ATF’s regulation of AR-15s and other semiautomatic firearms,” prosecutors wrote prior to the judge’s order.

    Federal law enforcement officials — and members of Congress — have been on notice about a potential problem with the language in federal gun law as applied to AR-15s since at least 2016.

    In July of that year, prosecutors in Northern California abandoned a case against a convicted felon named Alejandro Jimenez after a judge found that the AR-15 lower receiver he was accused of purchasing in an ATF undercover sting did not meet the definition of a receiver under the law.

    The ruling and subsequent dismissal drew little notice but prompted a letter to Congress from then-US Attorney General Loretta Lynch. She advised lawmakers that the judge’s decision was not suitable for appeal and that if ATF officials believed the definition should be changed, they should pursue regulatory or administrative action.

    Further into the report, we get to the details of the case.

    “We here at ROHG Industries have been doing build parties for quite some time,” he wrote in the sparsely worded, one-paragraph letter.

    “The customer installs the part into our machine and pushes the start button,” Roh explained.

    “Is this legal?” he asked.

    In November, the chief of ATF’s Firearms Technology Branch responded to Roh by letter. He told him that if the “build parties” he was referring to resulted in the production of anything the ATF classified as a firearm, he would need to obtain a license for manufacturing.

    Roh did not heed that advice. When an undercover ATF agent visited his factory on two occasions in December, he “observed parts and machinery used to manufacture AR-15-type firearms,” court documents state.

    Two days before Christmas, the ATF gave Roh a warning in the form of a “cease and desist” letter. It informed him that he was engaged in the unlicensed manufacture of firearms and was at risk of criminal prosecution.

    This time, Roh appeared to take heed.

    When undercover agents visited his factory in early January, he was not there. But employees told agents they were no longer machining gun parts.

    “The ATF had shut them down,” the employees said, according to a report recounting the conversation.

    They promised to call the purported customers back when they got the “green light” to resume operations.

    Less than a week later they got the call. Their visit to the factory the following day was captured in secretly recorded video obtained by CNN.

    Roh, dressed in a T-shirt and New York Yankees baseball cap, appeared congenial and knowledgeable about firearms. He made no secret of his business model.

    “Are you here to … make yourself a rifle right now?” he asked the agents during the encounter in January 2014.

    “I’m not going to get into trouble or anything like that?” one of the agents asked.

    “No,” Roh reassured him. “We’re legal, man.”

    Roh told the undercover agents he’d enacted a new policy after being shut down by the ATF: Anyone who wanted machining services performed had to pay a $25 fee to join his “gun club.” That way, he was no longer catering to the general public, he explained.

    He told one of the agents he was already considered a member because he’d bought a gun before. Roh told him he would have to vouch for the newcomer so that he could join the gun club as well.

    After collecting $25 from the new customer and agreeing to a price of $1,000 each for a pair of rifles he wanted to buy, Roh directed an employee to begin the machining process.

    Moments later, he stood next to the agent in front of a large piece of equipment that is computer-coded to precisely machine parts for AR-15-style firearms.

    “Go ahead and press the green button,” Roh told the undercover agent.

    “The green button?” the agent asked.

    “Yeah,” Roh replied. “That basically means that you did it — believe it or not.”

    A member of Roh’s staff then oversaw the process of machining and drilling that converted an unfinished lower receiver — an innocuous chunk of metal before the process began — into a finished receiver the ATF considered a firearm under the law.

    Roh then added barrels, stocks, bolts, triggers and other parts to make them fully-functioning weapons.

    Now to the legal machinations.

    When the case finally came to trial last year, much of the four-day proceeding consisted of Nicolaysen, Roh’s defense attorney, grilling ATF officials on arcane gun laws and regulations and the agency’s internal decision-making process.

    After both sides presented their evidence, the defense filed a motion for acquittal, arguing that the government’s case against Roh was “legally flawed” because the charges were based on a violation of an internal ATF “classification” as opposed to federal law.

    Nicolaysen argued that the definition of a receiver under the relevant federal code differed in various ways from the AR-15 component Roh was accused of manufacturing.

    Under the US Code of Federal Regulations, a firearm frame or receiver is defined as: “That part of a firearm which provides housing for the hammer, bolt or breechblock, and firing mechanism, and which is usually threaded at its forward portion to receive the barrel.”

    The lower receiver in Roh’s case does not have a bolt or breechblock and is not threaded to receive the barrel, Nicolaysen noted.

    He called the decision to classify it as a firearm nonetheless, the result of “secret, in-house decision-making.”

    Nicolaysen accused the ATF of abusing its authority by pursuing Roh based on his alleged violation of a policy “that masquerades as law.”

    He asked the judge to consider recommending that then-US Attorney General Jeff Sessions conduct a review to determine whether there were any similar cases pending around the country or past convictions “sustained on the basis of ATF policy, rather than law.”

    Prosecutors acknowledged there were technical differences between the regulation and the lower receiver in Roh’s case, but said the ATF’s interpretation of the regulation was consistent with the intent of federal gun laws. The agency’s reading of the law “should also receive deference from this court,” prosecutors Shawn J. Nelson and Benjamin D. Lichtman argued.

    Adopting the defense position, the prosecutors wrote, would be “manifestly incompatible” with the intent of the federal Gun Control Act and would “severely frustrate” enforcement of the law.

    The prosecutors’ filing said a ruling in favor of the defense could impact the receivers for up to 90% of the firearms in America.

    “The necessary result of this would be that the unregulated parts could be manufactured, sold, and combined with other commercially available parts to create completed, un-serialized firearms which would not be subject to background checks, and which would be untraceable,” the prosecutors wrote. “Defendant’s interpretation would mean that nearly every semi-automatic firearm could be purchased piece by piece with no regulation or background check before a prohibited person would have a firearm.”

    Though the trial lasted less than a week, Selna deliberated for more than year. In April, he issued a tentative order in which he determined that the ATF had improperly classified the AR-15 lower receivers in Roh’s case as firearms.

    He rejected the prosecution’s argument that the ATF’s interpretation of the regulation describing a receiver could reasonably be applied to the device at issue in Roh’s case.

    “There is a disconnect,” the judge wrote.

    Selna added that the combination of the federal law and regulation governing the manufacturing of receivers is “unconstitutionally vague” as applied in the case against Roh.

    “No reasonable person would understand that a part constitutes a receiver where it lacks the components specified in the regulation,” Selna wrote.

    Therefore, the judge determined, “Roh did not violate the law by manufacturing receivers.”

    The judge’s tentative order also found that the ATF’s in-house classification process failed to comply with federal rule-making procedures. Changes to substantive federal regulations typically include a notice-and-comment period and eventual publication in the Federal Register.

    “Consistent with the intent of federal law.” What the ATF doesn’t want the general public to know is that they’re making up the rules as they go. Letters to the ATF and ATF responses don’t constitute law, and they don’t even constitute regulation, strictly defined.

    First of all, I’ve discussed that before. There is a difference between law and regulation. Laws are made by Congress. Regulation, that behemoth which has so empowered the federal executive and the bureaucratic state, at least has the requirement that it gets published in the federal register, has a comment period, goes through a cost-benefit analysis as required by law, and then the final version gets published in the federal register. ATF regulations get none of this, and judgments and rules promulgated by the ATF bypass all of these requirements.

    Second, it’s apparent that the whole intent of the ATF rules is to limit the firearms in circulation, attempt as best as possible to govern who has them, and know with as much certainty as possible where they are at any particular time. The rules aren’t arbitrary – they have the purpose the controllers intended. They make the policy as it suits them at the moment, and then change it on a whim if they deem it more advantageous to their designs. For a silly example of this, witness their hand-wringing and rule du jour over whether you can legally shoulder a stabilizing brace.

    Third, they are so afraid that this decision would have disrupted those designs that they were willing to drop the case outright. After hearing the truth from this judge, that is, that the ATF was illegally bypassing the regulation process and imposing seemingly arbitrary policies in lieu of real regulations and laws, they literally don’t care. They are completely unmoved by the revelations of their illegality.

    Fourth, the ATF is run by controllers. We’ve also discussed this before. As I’ve pointed out before, “The desire to control others is the first sign, incorrigible pathology and premier sin of the wicked.” These folks are sociopaths. They have no conscience, and their pathological drive is to control others.
    Has to be a trump appointed judge. Great read btw.

  9. #29
    Join Date
    Apr 2011
    Location
    Erie, Pennsylvania
    (Erie County)
    Posts
    579
    Rep Power
    17415803

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    Quote Originally Posted by USMC3531 View Post
    The reason the 50 uppers were deemed firearms is it doesnt require the lower to feed ammo nor need the lower to cycle the action and function safely. (You could hit it with a hammer to set the round off and it wouldnt blow apart like a 556 upper would) they have made some belt fed uppers the registered part in some cases.
    Why do you think that a 5.56 upper will blow apart if it is not attached to a lower?
    We the people love our country so let the government fear us.

  10. #30
    Join Date
    May 2006
    Location
    127.0.0.1, Pennsylvania
    (Lancaster County)
    Posts
    20,351
    Rep Power
    21474874

    Default Re: He sold illegal AR-15s. Feds let him go free to avoid hurting gun control efforts

    After hearing the truth from this judge, that is, that the ATF was illegally bypassing the regulation process and imposing seemingly arbitrary policies in lieu of real regulations and laws, they literally don’t care. They are completely unmoved by the revelations of their illegality.
    That is because they know there is zero punishment for government officials engaged in such illegal behavior.
    Rules are written in the stone,
    Break the rules and you get no bones,
    all you get is ridicule, laughter,
    and a trip to the house of pain.

Page 3 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Replies: 7
    Last Post: May 4th, 2018, 06:05 AM
  2. Replies: 9
    Last Post: August 2nd, 2014, 06:33 AM
  3. Gun control efforts going nowhere
    By mjf in forum General
    Replies: 0
    Last Post: April 9th, 2009, 11:02 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •