Results 1 to 10 of 11
Thread: My Custom Built Bench Rifle.
-
October 8th, 2019, 08:26 PM #1Super Member
- Join Date
- May 2018
- Location
-
Philadelphia,
Pennsylvania
(Delaware County) - Posts
- 553
- Rep Power
- 11657996
My Custom Built Bench Rifle.
Certainly not the most difficult I’ve done, but I am proud of this one. I built this myself, after stripping & “Home Blueprinting” a Savage 10 Action. I had older pics, but recently I machined the new buttstock. My design.
Uses an AR buffer tube. I cut to desired length and had to machine & press in a new mounting lug.
Then I made a new end, & machined slots so it can can’t side to side. The plate to the right is from the old stock I was using.
Used 2024 Billet for the carrier plate of the stock. This pic is after rough machining & marking the attachment points.
Finally, finished, added the spacers and made a Kydex cheer rest. And the entire rifle. Also with new scope, trigger, etc.
Remember Biden the Pedophile! https://www.youtube.com/watch?v=uSRqaO6DXcA
-
October 8th, 2019, 09:15 PM #2
Re: My Custom Built Bench Rifle.
Sweet set up. I like the design of the buttstock...looks super light too.
-
October 8th, 2019, 09:55 PM #3
Re: My Custom Built Bench Rifle.
I'm not really sure what I'm looking at, but I like it!
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
October 9th, 2019, 12:09 AM #4Active Member
- Join Date
- Dec 2016
- Location
-
Warminster,
Pennsylvania
(Bucks County) - Posts
- 182
- Rep Power
- 3197939
Re: My Custom Built Bench Rifle.
Very nicely done, kudos to you!
S’more details please.
-
October 9th, 2019, 07:09 AM #5Super Member
- Join Date
- May 2018
- Location
-
Philadelphia,
Pennsylvania
(Delaware County) - Posts
- 553
- Rep Power
- 11657996
Re: My Custom Built Bench Rifle.
Yeah, I should have taken more pics. These few just show the basic machining I did to make the individual parts. I started with a stock that already used the buffer tube & the rear plate with the grooves. (The original shoulder rest). But I had to cut the buffer tube and fab that new piece with threaded hole.
Thank you for the kind words my friends.Remember Biden the Pedophile! https://www.youtube.com/watch?v=uSRqaO6DXcA
-
October 9th, 2019, 08:20 AM #6Active Member
- Join Date
- May 2018
- Location
-
Snack Capital of the US,
Pennsylvania
(York County) - Posts
- 158
- Rep Power
- 5521017
Re: My Custom Built Bench Rifle.
Just out of curiosity, considering your expertise, time, and materials - what do you think it should sell for if it was ever to be offered???
-
October 9th, 2019, 08:30 AM #7
Re: My Custom Built Bench Rifle.
Good Job.
Owner Trigger Time LLc 01 FFL/NFA Saylorsburg, PA. Sales/Service/Transfers/Training
NRA CRSO/Pistol/Rifle/Shotgun inst. BSA Rifle/Shotgun Merit badge counselor. US Navy Marksmanship Team Staff
-
October 9th, 2019, 02:54 PM #8Super Member
- Join Date
- May 2018
- Location
-
Philadelphia,
Pennsylvania
(Delaware County) - Posts
- 553
- Rep Power
- 11657996
Re: My Custom Built Bench Rifle.
Remember Biden the Pedophile! https://www.youtube.com/watch?v=uSRqaO6DXcA
-
October 17th, 2019, 03:49 PM #9
Re: My Custom Built Bench Rifle.
That looks awesome, great work.
I almost like it better unfinished though.Galations 6:9...And let us not grow weary of doing good, for in due season we will reap, if we do not give up.
Ashli Babbitt - Patriot
-
October 17th, 2019, 07:34 PM #10
Re: My Custom Built Bench Rifle.
Does the weight of the stock aid with recoil?
There is no greater sorrow than to recall in misery the time when we were happy - Dante.
Similar Threads
-
Custom Bench Sniper Rifle 308
By roman3667 in forum GeneralReplies: 0Last Post: April 13th, 2009, 09:29 PM -
6.5x55 Custom Built Long Range Rifle, Lilja Barrel, Timney Trigger
By W123driver in forum GeneralReplies: 0Last Post: April 3rd, 2009, 08:39 PM -
Your home built bench
By Kaos in forum GeneralReplies: 15Last Post: October 29th, 2008, 08:41 PM
Bookmarks