Pennsylvania Firearm Owners Association
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2010
    Pittsburgh (Allison Park), Pennsylvania
    (Allegheny County)
    Rep Power

    Default Supressor for 10.5" 300BLK SBR/Pistol & 5.56 16" recomendations.

    I'm building a 300BLK pistol and and depending on how I like it I may get a suppressor and eventually buy/build a more upper end custom 300BLK SBR.

    The suppressor will be primarily for the 10.5" 300BLK SBR. But I would like something I can use on 16" 5.56 so long as its not taking away much from its ability to be effective on the 10.5" 300BLK.

    Here are my requirements but they could be flexible.
    • Max length 6-7".
    • End user serviceable.
    • Ability to connect to a flash hider on both rifles.
    • Light (if possible).
    • Price around $1500 or less (if possible).
    "No, it's just a machine. I'm the weapon." - Jack Harper in Oblivion

  2. #2
    Join Date
    May 2010
    Scenery Hill, Pennsylvania
    (Washington County)
    Rep Power

    Default Re: Supressor for 10.5" 300BLK SBR/Pistol & 5.56 16" recomendations.

    Give Cory at CDS Arms a poke. He can show you some cans and point you in the right direction.

    Personally, I don't really give a hoot about end user service and I don't know many can owners who do, or have even had to clean a center fire rifle can. It takes a lot of rounds to see an increase in weight due to carbon build up/fowling, and then they just clean them with an ultra sonic cleaner or the chemical dip trick. Just my 2 cents on that point on your list.

    Other than that, minimizing weight/length and being able to QD attach to multiple rifles is good stuff. I wish I had gone with a 762SDN6 instead of the 762SD to save some weight/length. Otherwise I have no complaints with my AAC cans.
    Life is ten percent what happens to you and ninety percent how you respond to it.

  3. #3
    Join Date
    Aug 2011
    Milford, Pennsylvania
    (Pike County)
    Rep Power

    Default Re: Supressor for 10.5" 300BLK SBR/Pistol & 5.56 16" recomendations.

    The end user serviceable is gonna be a sticking point. Most centerfire fans donít require it so they donít make them that way. Youíre gonna be looking at a pistol can that does 300
    Blk if thatís what you want

  4. #4
    Join Date
    Apr 2009
    Doylestown, Pennsylvania
    (Bucks County)
    Rep Power

    Default Re: Supressor for 10.5" 300BLK SBR/Pistol & 5.56 16" recomendations.

    Very happy with my Sandman S. You can change out the end cap on the Sandman models for a specific one for sized for 556 or 308 which helps with noise reduction. They also use their keymount muzzle device so you can attach to any host you want.
    Last edited by Palerider; October 9th, 2019 at 06:43 AM.

Similar Threads

  1. Replies: 4
    Last Post: April 4th, 2007, 07:25 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops