Results 1 to 10 of 90
Thread: Commie Caliber AR15 Pistol Build
-
September 27th, 2019, 07:52 PM #1
Commie Caliber AR15 Pistol Build
This will be my official picture thread.
(this build actually started here, where I got some good input and tips)
I like my 7.62x39 AR15 carbine so much I decided I'd build a pistol in the same caliber!
After nailing down a barrel length I wanted to use, the fun began!
I chose to use an Aero Precision stripped upper with dust cover and no forward assist.
A great forum member hooked me up with a 7" barrel with an M4 profile which is what I wanted vs the more commonly found "heavy" profile barrel. (heavy barrels are... heavy)
I didn't want a KAK flash can - everyone and their mother has them - I wanted something different.
I found the "flash forwarder" seen below while searching for parts online and decided to give it a try.
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 27th, 2019, 07:53 PM #2
Re: Commie Caliber AR15 Pistol Build
This post reserved - possible parts list/finished product pic
Parts List:
$55.00 (new) - Upper - Aero Precision - no forward assist - Right to Bear
$60.00 (new) - Lower - Palmetto State Armory "LIBERTY" stripped, virgin lower
FREE*** (new) - Barrel - Radical Firearms 7" (***generously donated by a forum member)
$34.00 (new) - Muzzle Device - Rousch Sports - "Arkum Knight" Concussion Diversion Device Flash Can, Krinkov style - Rousch Sports
$9.00 (new) - Gas tube - Rousch Sports - Stainless/pistol length - Rousch Sports
$22.00 (new) - Gas Block - Rousch Sports - low profile micro - Melonite coated/black nitride - Rousch Sports
$85.00 (new) - BCG - Toolcraft 7.62x39 Full Auto BCG - Black Nitride w/ Enhanced Firing Pin - Arm or Ally
$21.00 (new) - Charging handle - Spikes Tactical - Standard - Skid Tactical
$10.00 (new) - 7.62x39 Engraved Dust Cover - Outdoor Sports USA - double sided - Outdoor Sports USA
$0.00 (new) - Trigger - Anderson Stainless Steel (leftover from another build) To be upgraded later to a LaRue Tactical MBT-2S
$5.00 (new) - Hammer Spring - Wolff XP (extra power) - Wolff Gunsprings
$75.00 (new) - Hand Guard - Aero Precision 7" ATLAS S-One M-LOK (blem sale) - Aero Precision
$75.00 (new) - Arm Brace - SB Tactical SBA3 (brace only - no tube) - B Kings Firearms
$20.00 (new) - Buffer tube kit - Right to Bear Buffer Tube 7075-T6, 6-position + spring/buffer/castle nut/end plate - Right to Bear
$20.00 (used) - Grip - Magpul MOE K-2 (reduced angle) - AIM Surplus
$15.00 (used) - Trigger Guard - Rainier Arms aluminum Modified Trigger Guard - Forum Classifieds
$10.00 (used) - Bolt Catch - Patriot Ordnance Factory enhanced bolt catch - Forum Classifieds
$17.00 (new) - Extended Mag Release - Odin Works (first version) - Swap from another gun
$21.00 (new) - LPK - Aero Precision (minus fire control group/grip) - Arm or Ally
$11.00 (new) - Sights - Front/Rear Chinese flip up BUIS - Outdoor Sports USA
$548.00 total
I just did some calculating using known pricing for budget parts in place of the ones I used.
I could have saved $215 by using "cheap stuff", making the total right about $335.
This is why "building" is not always cheaper than buying one already made - IF you are willing to "settle" for whatever you get with a ready made gun.
I prefer building - I can pick and choose exactly what parts/brands I use, and I can direct more spending to specific parts that I feel benefit the finished product.
All in all, I think I'm going to have a hot little pistol at a pretty reasonable price.Last edited by Emptymag; September 28th, 2019 at 01:38 PM. Reason: working on parts list
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 27th, 2019, 08:00 PM #3Grand Member
- Join Date
- Nov 2017
- Location
-
New Tripoli,
Pennsylvania
(Lehigh County) - Posts
- 2,372
- Rep Power
- 21474845
Re: Commie Caliber AR15 Pistol Build
Flame thrower
-
September 27th, 2019, 08:04 PM #4
Re: Commie Caliber AR15 Pistol Build
I replaced the dust cover with an engraved "7.62x39" door - labeled on both sides.
I looked all over for the best deal and this place offered the best overall value because their dust covers include the pin, spring and clip.
(price went up - I paid $9.99 shipped)
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 27th, 2019, 08:07 PM #5
Re: Commie Caliber AR15 Pistol Build
Mine's defective. I don't like fireballs, and had every intention of getting a PWS CQB comp for this like I have on my 5.56 pistol, because it eliminates flames/flashes with short barrels, but I didn't want to pay $100 for one, so I settled for a flash can.
Surprisingly (I've test fired this upper using my other pistol lower), I didn't get any fireballs.I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 27th, 2019, 09:59 PM #6
Re: Commie Caliber AR15 Pistol Build
I started working on a parts list and I was going through my emails to see exactly what I paid for some things when I realized I had already received an Aero Precision LPK! I was just about to place an order for a CMMG parts kit tonight because I thought it was the last thing I needed.
Apparently there's an LPK laying around here that never made it into the "box of gun crap".I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 27th, 2019, 10:16 PM #7
-
September 28th, 2019, 01:20 PM #8
Re: Commie Caliber AR15 Pistol Build
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 28th, 2019, 01:24 PM #9Grand Member
- Join Date
- Nov 2017
- Location
-
New Tripoli,
Pennsylvania
(Lehigh County) - Posts
- 2,372
- Rep Power
- 21474845
-
September 28th, 2019, 01:53 PM #10
Similar Threads
-
Another Gun in a Box - AR15 Pistol Build
By Emptymag in forum Gun PicturesReplies: 144Last Post: June 1st, 2023, 12:42 PM -
Ar15. Pistol build questions.
By Code13 in forum PistolsReplies: 7Last Post: July 11th, 2015, 08:42 AM -
Help with ar15 pistol build.
By Connal in forum PistolsReplies: 7Last Post: September 18th, 2014, 05:14 PM -
Finalized my AR15 pistol build with upgrades
By mythaeus in forum Gun PicturesReplies: 30Last Post: March 28th, 2010, 02:10 PM
Bookmarks