Pennsylvania Firearm Owners Association
Page 1 of 9 12345 ... LastLast
Results 1 to 10 of 90
  1. #1
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Commie Caliber AR15 Pistol Build

    This will be my official picture thread.
    (this build actually started here, where I got some good input and tips)

    I like my 7.62x39 AR15 carbine so much I decided I'd build a pistol in the same caliber!

    After nailing down a barrel length I wanted to use, the fun began!

    I chose to use an Aero Precision stripped upper with dust cover and no forward assist.
    A great forum member hooked me up with a 7" barrel with an M4 profile which is what I wanted vs the more commonly found "heavy" profile barrel. (heavy barrels are... heavy)

    I didn't want a KAK flash can - everyone and their mother has them - I wanted something different.
    I found the "flash forwarder" seen below while searching for parts online and decided to give it a try.





    I called to check my ZIP CODE!....DY-NO-MITE!!!

  2. #2
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    This post reserved - possible parts list/finished product pic

    Parts List:

    $55.00
    (new) - Upper - Aero Precision - no forward assist - Right to Bear
    $60.00 (new) - Lower - Palmetto State Armory "LIBERTY" stripped, virgin lower
    FREE*** (new) - Barrel - Radical Firearms 7" (***generously donated by a forum member)
    $34.00 (new) - Muzzle Device - Rousch Sports - "Arkum Knight" Concussion Diversion Device Flash Can, Krinkov style - Rousch Sports
    $9.00 (new) - Gas tube - Rousch Sports - Stainless/pistol length - Rousch Sports
    $22.00 (new) - Gas Block - Rousch Sports - low profile micro - Melonite coated/black nitride - Rousch Sports
    $85.00 (new) - BCG - Toolcraft 7.62x39 Full Auto BCG - Black Nitride w/ Enhanced Firing Pin - Arm or Ally
    $21.00 (new) - Charging handle - Spikes Tactical - Standard - Skid Tactical
    $10.00 (new) - 7.62x39 Engraved Dust Cover - Outdoor Sports USA - double sided - Outdoor Sports USA
    $0.00 (new) - Trigger - Anderson Stainless Steel (leftover from another build) To be upgraded later to a LaRue Tactical MBT-2S
    $5.00 (new) - Hammer Spring - Wolff XP (extra power) - Wolff Gunsprings
    $75.00 (new) - Hand Guard - Aero Precision 7" ATLAS S-One M-LOK (blem sale) - Aero Precision
    $75.00 (new) - Arm Brace - SB Tactical SBA3 (brace only - no tube) - B Kings Firearms
    $20.00 (new) - Buffer tube kit - Right to Bear Buffer Tube 7075-T6, 6-position + spring/buffer/castle nut/end plate - Right to Bear
    $20.00 (used) - Grip - Magpul MOE K-2 (reduced angle) - AIM Surplus
    $15.00 (used) - Trigger Guard - Rainier Arms aluminum Modified Trigger Guard - Forum Classifieds
    $10.00 (used) - Bolt Catch - Patriot Ordnance Factory enhanced bolt catch - Forum Classifieds
    $17.00 (new) - Extended Mag Release - Odin Works (first version) - Swap from another gun
    $21.00 (new) - LPK - Aero Precision (minus fire control group/grip) - Arm or Ally
    $11.00 (new) - Sights - Front/Rear Chinese flip up BUIS - Outdoor Sports USA

    $548.00 total

    I just did some calculating using known pricing for budget parts in place of the ones I used.
    I could have saved $215 by using "cheap stuff", making the total right about $335.

    This is why "building" is not always cheaper than buying one already made - IF you are willing to "settle" for whatever you get with a ready made gun.
    I prefer building - I can pick and choose exactly what parts/brands I use, and I can direct more spending to specific parts that I feel benefit the finished product.

    All in all, I think I'm going to have a hot little pistol at a pretty reasonable price.
    Last edited by Emptymag; September 28th, 2019 at 01:38 PM. Reason: working on parts list
    I called to check my ZIP CODE!....DY-NO-MITE!!!

  3. #3
    Join Date
    Nov 2017
    Location
    New Tripoli, Pennsylvania
    (Lehigh County)
    Posts
    2,335
    Rep Power
    21474845

    Default Re: Commie Caliber AR15 Pistol Build

    Flame thrower

  4. #4
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    I replaced the dust cover with an engraved "7.62x39" door - labeled on both sides.

    I looked all over for the best deal and this place offered the best overall value because their dust covers include the pin, spring and clip.
    (price went up - I paid $9.99 shipped)



    I called to check my ZIP CODE!....DY-NO-MITE!!!

  5. #5
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    Quote Originally Posted by GOYABEAN View Post
    Flame thrower
    Mine's defective. I don't like fireballs, and had every intention of getting a PWS CQB comp for this like I have on my 5.56 pistol, because it eliminates flames/flashes with short barrels, but I didn't want to pay $100 for one, so I settled for a flash can.

    Surprisingly (I've test fired this upper using my other pistol lower), I didn't get any fireballs.
    I called to check my ZIP CODE!....DY-NO-MITE!!!

  6. #6
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    I started working on a parts list and I was going through my emails to see exactly what I paid for some things when I realized I had already received an Aero Precision LPK! I was just about to place an order for a CMMG parts kit tonight because I thought it was the last thing I needed.
    Apparently there's an LPK laying around here that never made it into the "box of gun crap".
    I called to check my ZIP CODE!....DY-NO-MITE!!!

  7. #7
    Join Date
    Nov 2007
    Location
    Belly of the BEAST, Pennsylvania
    (Montgomery County)
    Posts
    2,387
    Rep Power
    21367481

    Default Re: Commie Caliber AR15 Pistol Build

    Quote Originally Posted by Emptymag View Post
    I started working on a parts list and I was going through my emails to see exactly what I paid for some things when I realized I had already received an Aero Precision LPK! I was just about to place an order for a CMMG parts kit tonight because I thought it was the last thing I needed.
    Apparently there's an LPK laying around here that never made it into the "box of gun crap".
    Score!

  8. #8
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    I posted this in another thread, but I finally got a vise and an upper vise block for torquing my own barrel nuts on.
    In the past I built the guns, but had someone else attach the barrel for me.

    I don't have a work bench so this was the solution for a secure mount. It's ghetto, but it works!

    I called to check my ZIP CODE!....DY-NO-MITE!!!

  9. #9
    Join Date
    Nov 2017
    Location
    New Tripoli, Pennsylvania
    (Lehigh County)
    Posts
    2,335
    Rep Power
    21474845

    Default Re: Commie Caliber AR15 Pistol Build

    Quote Originally Posted by Emptymag View Post
    I posted this in another thread, but I finally got a vise and an upper vise block for torquing my own barrel nuts on.
    In the past I built the guns, but had someone else attach the barrel for me.

    I don't have a work bench so this was the solution for a secure mount. It's ghetto, but it works!

    Nothing wrong with that our minds are a beautiful thing when used properly

  10. #10
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,534
    Rep Power
    21474887

    Default Re: Commie Caliber AR15 Pistol Build

    Quote Originally Posted by GOYABEAN View Post
    Nothing wrong with that our minds are a beautiful thing when used properly
    Man, I should have done a Youtube video of my "non-standard" assembly techniques and improvised gunsmithing tools.
    It would be hysterical.
    I called to check my ZIP CODE!....DY-NO-MITE!!!

Page 1 of 9 12345 ... LastLast

Similar Threads

  1. Another Gun in a Box - AR15 Pistol Build
    By Emptymag in forum Gun Pictures
    Replies: 144
    Last Post: June 1st, 2023, 12:42 PM
  2. Ar15. Pistol build questions.
    By Code13 in forum Pistols
    Replies: 7
    Last Post: July 11th, 2015, 08:42 AM
  3. Help with ar15 pistol build.
    By Connal in forum Pistols
    Replies: 7
    Last Post: September 18th, 2014, 05:14 PM
  4. Finalized my AR15 pistol build with upgrades
    By mythaeus in forum Gun Pictures
    Replies: 30
    Last Post: March 28th, 2010, 02:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •