Results 1 to 10 of 10
Thread: Marks on brass
-
August 4th, 2019, 07:50 AM #1Grand Member
- Join Date
- Mar 2011
- Location
-
mechanicsburg,
Pennsylvania
(Cumberland County) - Posts
- 1,243
- Rep Power
- 8954928
Marks on brass
Something new to me. Bought a used, clean 700 in 22-250. Working up a load for it. Started with new federal gold medal brass. Tried my first batch of reloads. No pressure signs which I expected due to moderate start point. Went back to bench to make some changes. Was checking fired cases and noticed spiral marks on main body of case. Sorta looks like something fired from a h&k with the fluted chamber. This is not just burnt powder marks it's not colored at all. These are faint brass spiral distortions. I can just barely feel them with a finger nail. Extraction was ok on the fired cases, no other concerns other than brass life. I have not tried running these threw the dies yet. Any thoughts or concerns? Only thing I can come up with is a crappy chamber cutting job, but does it really matter? Thanks red dog
-
August 4th, 2019, 10:12 AM #2Grand Member
- Join Date
- Jan 2013
- Location
-
Richboro,
Pennsylvania
(Bucks County) - Posts
- 3,070
- Rep Power
- 21474851
Re: Marks on brass
How "moderate " were your loads? If you don't hit a certain pressure the brass won't fully expand in the chamber and the gasses flowing around it can do funny things. See if the marks go away when you get closer to max.
How does the chamber look? I would give it a good cleaning till it is shiny. Maybe even a quick polish with Flitz on a tightly fitting mop.
-
August 4th, 2019, 11:10 AM #3
Re: Marks on brass
Pictures
You describe it very well but not a good as a picture would.The Gun is the Badge of a Free Man
-
August 4th, 2019, 12:28 PM #4Active Member
- Join Date
- Jul 2011
- Location
-
Leola
- Posts
- 178
- Rep Power
- 5150183
Re: Marks on brass
The reamer may have chattered when the chamber was cut.
Polishing the chamber may help.
If the barrel is low round count and polishing is not an option, you could have the barrel set back and rechambered.
Losing a half inch of the barrel, from setting it back, will not affect velocity very much.
-
August 4th, 2019, 12:45 PM #5Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,659
- Rep Power
- 21474846
Re: Marks on brass
Now you know why it was for sale 🤔
Too many times I read about people with problem firearms "selling it and moving on". No idea if this is the case but it iritates me when i read it.
-
August 4th, 2019, 03:37 PM #6Grand Member
- Join Date
- Mar 2011
- Location
-
mechanicsburg,
Pennsylvania
(Cumberland County) - Posts
- 1,243
- Rep Power
- 8954928
Re: Marks on brass
thanks for the responses. here are some pics. gotta say what a pita posting them. I will work on that. if you look closely you can see the spiral marks in the brass body. this isn't blow by. more of a fire forming to a screwed up chamber I believe. fyi load data is federal brass new, Hornady 55 grain vmax 22271 bullet, 210 primers, n150 powder at 33.0 and 33.2 grains. roughly 3400 fps. max in my book is 35.4 grains for 3600 fps. I guess my big concern is brass degradation, hate to get into 3rd or 4th load and get split cases. setting back the barrel a touch and recutting is a option or just getting a better barrel all together is a option as well. will say these loads are already sub moa but im always trying to make a better fly swatter.
-
August 4th, 2019, 03:47 PM #7
Re: Marks on brass
The chamber looks to be rifled.
-
August 4th, 2019, 04:03 PM #8Grand Member
- Join Date
- Mar 2011
- Location
-
mechanicsburg,
Pennsylvania
(Cumberland County) - Posts
- 1,243
- Rep Power
- 8954928
Re: Marks on brass
That's exactly what it looks like. Very subtle but all the way around the case and very consistent spacing and dimensions.
-
August 4th, 2019, 04:04 PM #9
Re: Marks on brass
What do you see when you pull the bolt and look at the chamber?
Illegitimus non carborundum est
-
August 4th, 2019, 04:11 PM #10Grand Member
- Join Date
- Jan 2013
- Location
-
Richboro,
Pennsylvania
(Bucks County) - Posts
- 3,070
- Rep Power
- 21474851
Re: Marks on brass
That does look suspiciously like the flutes on a lot of reamers. They probably stopped turning it before it was removed. Look in the chamber and see if you can see it.
If it was a new rifle I would say send it back but the marks don't look too bad and you should be able to polish them out some. Brownells sells chamber polishers that you chuck in a drill but they are relatively pricey (for a cheap bastard like me). I would find a tight fitting bore mop then lube it up with Flitz. Chuck it in a drill and polish the chamber working it in and out. Do not put any pressure on the chambers shoulder area! You do not need to remove much metal so go slow and clean and check the chamber often. When it looks a little better stop and try your loads again.
I don't think Flitz alone will get every last trace out but it should help. I also don't think these minor surface marks will significantly shorten your brass life or will make you blow up.
Similar Threads
-
marks
By Clark Kent in forum FeedbackReplies: 0Last Post: October 4th, 2012, 02:00 AM -
Import Marks
By bortle in forum GeneralReplies: 4Last Post: October 26th, 2010, 08:26 AM -
Holster marks?
By rallen in forum GeneralReplies: 5Last Post: May 23rd, 2008, 09:01 PM
Bookmarks