Results 11 to 20 of 20
Thread: MPA Mac-11 with Pristol brace?
-
August 6th, 2019, 10:24 PM #11
Re: MPA Mac-11 with Pristol brace?
Buy a cheap piece of rail and drill and tap the receiver. There are companys that sell rails to mount to the rear of ak pistols
-
August 6th, 2019, 11:54 PM #12
Re: MPA Mac-11 with Pristol brace?
https://masterpiecearms.com/shop/mpa...without-stock/
Looks like everything youd need..
-
August 7th, 2019, 12:33 AM #13
-
August 7th, 2019, 09:48 AM #14
Re: MPA Mac-11 with Pristol brace?
Yup that is correct.... The SB tactical FS1913 brace has the folder mechanism already built in... So the one one above would add a second unneeded joint.... (Like a wrist and elbow if you follow). I bet I could weld a piece of rail to the mount from MPA.... But at $80 a pit pricy..... For what will just be a spacer to mount the rail.... The receiver is already drilled and tapped.... With three holes in a triangle pattern....
This is the brace I want to add to the MPA:
https://www.sb-tactical.com/product/fs1913/
* this wouldn't be such a hassle with the old style MPA or Cobray Mac-11s, Stormwerks makes a bolt on adapter with rail,
That I could simply bolt together with the 1913 brace.... But it doesn't fit the new style MPAs... Like I just bought....
http://stormwerkz.com/stock-adapters...-type-2-m1913/Last edited by 1096369fred; August 7th, 2019 at 09:58 AM.
A Templar is truly a fearless knight, and secure on every side, for his soul is protected by the armor of faith, just as his body is protected by the armor of steel.
Big whoop, I'm spooning a Barret .50 Cal...... I could like kill a building.....
-
August 7th, 2019, 11:38 AM #15
Re: MPA Mac-11 with Pristol brace?
Last edited by 1096369fred; August 7th, 2019 at 11:44 AM.
A Templar is truly a fearless knight, and secure on every side, for his soul is protected by the armor of faith, just as his body is protected by the armor of steel.
Big whoop, I'm spooning a Barret .50 Cal...... I could like kill a building.....
-
August 7th, 2019, 12:47 PM #16
Re: MPA Mac-11 with Pristol brace?
The more I look at this, and read reviews, the more I think I'll go with the side folding MPX Sig brace..... It is cheaper,
And from what I have read, more ridged then the SB tactical 1913 brace.A Templar is truly a fearless knight, and secure on every side, for his soul is protected by the armor of faith, just as his body is protected by the armor of steel.
Big whoop, I'm spooning a Barret .50 Cal...... I could like kill a building.....
-
August 7th, 2019, 09:39 PM #17
Re: MPA Mac-11 with Pristol brace?
http://stormwerkz.com/stock-adapters...dapter-type-2/ you may be able to find cheaper ones, or make one.
-
August 9th, 2019, 12:06 AM #18
Re: MPA Mac-11 with Pristol brace?
Thanks USMC3531,
I will check that one out.... I have access to a MIG welder..... (But have no great skill!) so I may try and cobble up something
That will get the job done.... It Seems like MPA went to a lot of trouble threading the end of their aluminum receiver.... Only to have no accessories available....
I can't imagine why they did not put a threaded hole in the center of the back of the receiver.... Nor why they did away with the one on the underside behind the grip.... Which is where most aftermarket company's like US Machine Gun and Stormwerkz mount them..... It is a little frustrating..... But if ya can't buy.... Then make....
Well.... I'll give it the old college try anyway!
Thanks!
F.A Templar is truly a fearless knight, and secure on every side, for his soul is protected by the armor of faith, just as his body is protected by the armor of steel.
Big whoop, I'm spooning a Barret .50 Cal...... I could like kill a building.....
-
August 9th, 2019, 01:35 AM #19
Re: MPA Mac-11 with Pristol brace?
I have a piece of unfinished aluminum rail you are welcome to have. Cut a plate to match the rear, drill it to match the receiver then bolt this rail to the plate...
-
September 3rd, 2019, 10:47 AM #20
Re: MPA Mac-11 with Pristol brace?
Hey Guys,
I picked up a used Cobray for a good price, (thanks DirectorNCS!), and added the Stormwerks adapter and the SB tactical 1913 brace....
Haven't shot it yet but maybe tomorrow! I really want to use the 1913 brace on my MPA so am gonna try my hand at building an adapter out of 1/4" aluminum bar stock.... I'm not sure how I am gonna locate the mount holes.... But I have a set of calipers.... So guess just located the X and Y axis and go from there.... How hard can it be?
(Famous last words!)
I
Thanks!
Fred
Last edited by 1096369fred; September 24th, 2019 at 01:15 PM.
Similar Threads
-
Arm brace on AP-9 or Tec 9?
By 1096369fred in forum PistolsReplies: 1Last Post: August 12th, 2018, 03:19 PM
Bookmarks