308 chamber adapter

[nat175f2]

Does anyone know where i can get a 30-06 to 308 chamber adapter.

[solrac7]

Wow ! Sorry - I haven't even heard of that concept in about 25 years ! That's a blast from the past ! Used to see them in shotgun news...

[flygrimm]

Try this. Not sure if he is still in business. I poached this from another forum dated August 2018.

MCA Sports/Ace Bullet Company
2800 West 33rd Road
Anchorage, Alaska 99517-2201
(907) 248-4913

Stuart

[d4xycrq]

Let us know how you make out, Nat! I used one years ago in a Garand, bought from that vendor that advertiser in Shotgun News. Never ejected - used Loc-Tite to make sure it stayed put. What rifle are you thinking about adapting?

Ray

[nat175f2]

Thanks, but web site was dead. I want to use in in m1 garand for shooting 308 blanks.

[Gunsnwater]

US Coast Guard-Auxiliary

2058 River Rd, Reading, PA 19605
(610) 921-0747

They are listed for honor color guard classes. They should be able to help you.

[Hawk]

Don't waste your time and money. Just shoot 30.06 blanks.

https://www.sportsmansguide.com/prod...-rds?a=1336258


BTW,

I have 500 rounds of DAG 308 plastic blanks for sale cheap!

[flygrimm]

https://www.facebook.com/MCA-Sports-...5528801064319/

Facebook page.

Stuart

[abner13]

The M1 Garand needed chamber reaming for the insert/filler as the 7.62x51 NATO (.308 Win) has the same head diameter , but less body taper. Bet ya 10:1 that a 7.62 blank won't allow the bolt to close in your unmodified chamber.

However , running standard USGI 7.62 blanks thru a FL sizing die with the decapping stem removed will work just fine in an M1. I've done it.

[SgtRecon]

The M1 Garand needed chamber reaming for the insert/filler as the 7.62x51 NATO (.308 Win) has the same head diameter , but less body taper. Bet ya 10:1 that a 7.62 blank won't allow the bolt to close in your unmodified chamber.

However , running standard USGI 7.62 blanks thru a FL sizing die with the decapping stem will work just fine in an M1. I've done it.

Abner...can you elaborate ? Im sure you meant "without " de capping pin? and are you using a 308 or 30-06 die ? i have a bunch of 762x51 blanks Id like to have some fun with , just for shits and giggles. Not sure if Id run them through my spanking new Criterion barrel though, good to know the process just in case