Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Join Date
    Sep 2011
    Location
    Lower Burrell, Pennsylvania
    (Westmoreland County)
    Posts
    80
    Rep Power
    1656

    Default M&P 9c should I do the apex trigger?

    I need some feedback.

    I have an M&P 9c but I hate the gritty trigger and how far back it brakes.

    Do you guys think the apex forward set flat front trigger is too light for a carry gun?

    Any feedback is appreciated.

    https://www.midwayusa.com/product/10...-and-w-m-and-p

  2. #2
    Join Date
    Feb 2012
    Location
    Susquehanna County, Pennsylvania
    (Susquehanna County)
    Posts
    306
    Rep Power
    161203

    Default Re: M&P 9c should I do the apex trigger?

    I put an apex trigger on my carry gun and I have no complaints! I had the same issue with the stock trigger. My groups are so much tighter with the Apex.

  3. #3
    Join Date
    Jun 2010
    Location
    warminster, Pennsylvania
    (Bucks County)
    Posts
    2,757
    Rep Power
    21474848

    Default Re: M&P 9c should I do the apex trigger?

    I have a compact 40. I did the apex.


    Yes. Yes, you should.
    There is no greater sorrow than to recall in misery the time when we were happy - Dante.

  4. #4
    Join Date
    Jun 2010
    Location
    warminster, Pennsylvania
    (Bucks County)
    Posts
    2,757
    Rep Power
    21474848

    Default Re: M&P 9c should I do the apex trigger?

    Wow...necrothreaded again.
    There is no greater sorrow than to recall in misery the time when we were happy - Dante.

  5. #5
    Join Date
    Sep 2009
    Location
    POCONO MOUNTAINS, PENNSYLVANIA, Pennsylvania
    (Monroe County)
    Age
    69
    Posts
    3,089
    Rep Power
    21474850

    Default Re: M&P 9c should I do the apex trigger?

    I would definitely sell it and get a Glock !

  6. #6
    Join Date
    Feb 2015
    Location
    814, Pennsylvania
    Posts
    804
    Rep Power
    6278344

    Default Re: M&P 9c should I do the apex trigger?

    I have a large box of the M&P series pistol.
    Factory trigger on all of them.
    Far from a trigger snob , I've owned/own worked/after markets triggered firearms.
    But learned to shoot on double action wheelguns and some horrible surplus rifles.
    it's a trigger , you can make it work

  7. #7
    Join Date
    Sep 2011
    Location
    Lower Burrell, Pennsylvania
    (Westmoreland County)
    Posts
    80
    Rep Power
    1656

    Default Re: M&P 9c should I do the apex trigger?

    This came back from the dead. I have not put a trigger on the gun but still dont like the gun. I should sell it. Sig p365 is in my future.

  8. #8
    Join Date
    Feb 2015
    Location
    814, Pennsylvania
    Posts
    804
    Rep Power
    6278344

    Default Re: M&P 9c should I do the apex trigger?

    Given the resale value of a used 9c …. as compared to possible usefulness , I'd vote keep it and get your sig in addition.

  9. #9
    Join Date
    Jan 2011
    Location
    Waynesboro, Pennsylvania
    (Franklin County)
    Posts
    2,994
    Rep Power
    21474848

    Default Re: M&P 9c should I do the apex trigger?

    I put an Alex trigger and spring kit in my SD9ve. I removed it an hour later. I hated the way the Apex trigger felt. It did shorten the take-up some, and possibly the pull weight, but the face of the trigger was super uncomfortable for me. It wasn't a flat trigger though. It also seemed a little inconsistant, like it would break at different times something. I can't think what would cause that though so it just may have been something I felt.
    I put the stock trigger and springs back in. Before doing that I ran some very fine sandpaper across the trigger parts, which really smoothed out the grittyness, so now it's a rather long heavy pull but it's very consistent and smooth.
    The Hostler

  10. #10
    Join Date
    Sep 2011
    Location
    Zelienople, Pennsylvania
    (Butler County)
    Posts
    5,025
    Rep Power
    21474850

    Default Re: M&P 9c should I do the apex trigger?

    Quote Originally Posted by CityOfSteel View Post
    This came back from the dead. I have not put a trigger on the gun but still dont like the gun. I should sell it. Sig p365 is in my future.
    Do it. My M&P9c and my Kahr CM9 both became obsolete the day I bought the P365. I pocket carry the P365 with the 10 round mag, or carry OWB with the 12-round mag.

Page 1 of 2 12 LastLast

Similar Threads

  1. which apex trigger for M&P?
    By nick060200 in forum Pistols
    Replies: 14
    Last Post: March 9th, 2017, 04:29 PM
  2. Apex trigger kit
    By rensdd in forum Pistols
    Replies: 6
    Last Post: February 27th, 2015, 09:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops