Results 1 to 10 of 10
Thread: M1 Garand .308 info needed
Hybrid View
-
May 9th, 2019, 07:07 PM #1
M1 Garand .308 info needed
I have the opportunity to acquire a SpringField Armory M1 Garand in .308.
With that said, I am somewhat knowledgeable on the M1 platform, but know very little about them chambered in .308.
Best I can tell from my brief time handling is that the rifle is in used but very good condition, to use CMP terms I would put this as service grade, and toward the high water mark at that.
I'm looking for any info on gotchas or things to look out for since its unlikely I will be able to shoot it before I buy. Bore appears to be VG with sharp rifling, and timing appears to be good as well.
I'm also looking for pricing, as I believe its being sold at a fair price, but the market has blown up considerably since I last investigated current Garand Pricing.
Some pricing high or low estimates would be helpful.
Thanks,
Rob
Optimized-20190505_151912.jpg
-
May 9th, 2019, 07:29 PM #2
Re: M1 Garand .308 info needed
Ya might want to ask that question over at the M14 forum. They'll know the smallest details , markings and part numbers.
But many were coverted by the US Navy for issue and or match use. They were converted by several methods , from chamber reaming and inserts to rebarreling.
Many were converted after transition to civilian life too.I don't speak English , I talk American!
-
May 9th, 2019, 08:00 PM #3Super Member
- Join Date
- Feb 2015
- Location
-
814,
Pennsylvania
- Posts
- 918
- Rep Power
- 9430368
Re: M1 Garand .308 info needed
I have a feeling the rifle in question is a commercial product and not a USGI Springfield.
OP correct me if wrong.
Is it a cast receiver?.
I believe at one time SpringField Armory the commercial product company was thought to be using less than ideal parts.
What is the cost of this rifle?
Currently the CMP sells 308 Garands for $1250 and their custom shop will barrel one for you also .....................
The price of a commercial product Springfield Armory 308 M1 would need to be mighty low to pick it instead of going the CMP route.
Keep in mind , very often the CMP customer service is top notch , should there be a problem.
Given the rep and all things considered , if the cost of this rifle was anywhere remotely near a CMP product or what the CMP would put one together for , I would pass.
IF on the other hand this is the USGI Springfield Armory and not a commercial product company............ I'd say go for it .... and I already gave you the price for oneLast edited by Boondox; May 9th, 2019 at 08:05 PM.
-
May 9th, 2019, 08:15 PM #4
Re: M1 Garand .308 info needed
What's the first four digits of the s/n? If the first digit is a 7, it's a commercial Springfield, Inc. rifle. Lots were made, most are good shooters.
If the s/n starts with a 5 or less, it's a converted GI. Many different organizations converted them, from commercial gunsmiths and businesses like Fulton Armory, to contractors of the US Navy.
Quality 7.62 conversions always have a spacer at the front of the magwell; either white plastic or gray-green phosphated steel. Navy conversions had the white plastic spacers, but not all conversions with white spacers are Navy rifles; spacers were available as surplus parts and used by businesses and individuals. The phosphated metal spacers were generally commercial or foreign. My Fulton rebuild has a phosed metal spacer.
Navy conversions were the Mk 2 Mod 0, which used a chamber insert to "rechamber" the barrel but these had a habit of coming loose and ejecting with an empty cartridge. The Mk 2 Mod 1 rifle was fitted with a new barrel with a 1:12 twist that was more suited to the M80 ball ammo rather than the M2 Ball 30-06 round.
The barrels of the Navy conversions have appropriate markings peculiar to when the conversions were performed and by whom. These markings can be seen when the op rod is pulled to the rear and latched, and viewed in the gap between the op rod and the handguard.
Commercial barrels do not have a drawing number that starts with a D or a 6; they will generally just be stamped "7.62". GI barrels will have a drawing number, last two digits of the year, or month hyphen last two digits of the year. Most Navy conversions will be stamped "AMF" or "H&R" on the barrel in the same location along with "7.62".
While 7.62 converted M1 Rifles can feed and cycle the NATO round without a white plastic or metal spacer if properly set up, a spacer is "belt and suspenders" for reliable functionality.
If you can snap a pic of the barrel markings and the receiver heel stamp and LMK what spacer it has, if any, I could give you a better idea of what you're looking at.
NoahWisdom and knowledge shall be the stability of thy times.
-
May 9th, 2019, 08:23 PM #5
Re: M1 Garand .308 info needed
You talk like you were an armorer, or something... sheesh!
-
May 10th, 2019, 09:11 AM #6
Re: M1 Garand .308 info needed
Get a real Garand! 30.06 baby!
Just a FYI, If you ever choose to participate in a CMP "as issued" Garand match, you won't be able to use that rifle (308).Toujours prêt
Similar Threads
-
m1 garand info history help
By vic2367 in forum RiflesReplies: 27Last Post: June 13th, 2013, 07:53 PM -
Info needed please
By SteveinNEPA in forum Concealed & Open CarryReplies: 6Last Post: June 20th, 2011, 07:14 AM -
AR .22 conversion kit info needed
By JIMMYC308 in forum GeneralReplies: 12Last Post: October 7th, 2009, 11:51 AM -
log splitter info needed
By bortle in forum GeneralReplies: 11Last Post: September 18th, 2008, 11:14 PM -
Garand Info
By Wasz in forum GeneralReplies: 12Last Post: August 25th, 2008, 12:26 AM
Bookmarks