Results 11 to 20 of 38
Thread: Screwdriver/Bit Set
-
April 24th, 2019, 12:52 PM #11
Re: Screwdriver/Bit Set
Yup, I see that. The 100 piece?
You know what? I don't even have a driver for these bits! Just electric which would not be good working on guns. I just have the torque one but that would not be used to remove screws and whatnot. I need one of those too!Last edited by Gunowner99; April 24th, 2019 at 12:58 PM.
Gunowner99 - NRA Benefactor Life Member
-
April 24th, 2019, 01:03 PM #12Super Member
- Join Date
- Aug 2008
- Location
-
Levittown,
Pennsylvania
(Bucks County) - Age
- 69
- Posts
- 843
- Rep Power
- 4386769
-
April 24th, 2019, 01:04 PM #13
-
April 24th, 2019, 01:10 PM #14
Re: Screwdriver/Bit Set
Oh yeah, but it is a torque driver so not really designed to remove screws and not fudge up the expensive driver so to speak. That is what I mean.
Gunowner99 - NRA Benefactor Life Member
-
April 24th, 2019, 01:16 PM #15
Re: Screwdriver/Bit Set
Make sure you get a set of JIS bits.
Japanese industrial standard. Most Phillips head screw on anything Japanese is actually JIS, regular Phillip's head screwdrivers will strip them out.
Also, buy an impact screwdriver. They are great to have.
https://www.rockymountainatvmc.com/p...mpact-driver-p
You can use any hex bit, put it on the screw and give it a light tap and they will unstick any screw/bolt
-
April 24th, 2019, 01:18 PM #16Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,656
- Rep Power
- 21474846
Re: Screwdriver/Bit Set
what Wis said.
You need holliw ground bits for gun screws. don't be bubba.
-
April 24th, 2019, 01:21 PM #17Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,656
- Rep Power
- 21474846
Re: Screwdriver/Bit Set
this is what i have.
https://usa.palmettostatearmory.com/...SABEgK2ZvD_BwE
-
April 24th, 2019, 01:40 PM #18
Re: Screwdriver/Bit Set
Yeah, that seems to fit the bill, I know buy once cry once for sure.
Gunowner99 - NRA Benefactor Life Member
-
April 24th, 2019, 01:53 PM #19Active Member
- Join Date
- Nov 2006
- Location
-
Lehigh Twp,
Pennsylvania
(Northampton County) - Posts
- 135
- Rep Power
- 5530126
Re: Screwdriver/Bit Set
I grabbed this for the range bag a couple years ago. I liked it because it had a lot of "normal" sized bits, and a bunch of smaller ones too.
I know a lot of times I needed to adjust a sight or something and had nothing small enough.
It has the std .250" bits, and the smaller ones are .150
https://smile.amazon.com/Amazonbasic...ateway&sr=8-30
-
April 24th, 2019, 01:57 PM #20
Re: Screwdriver/Bit Set
Yeah, that's the one I posted the link on E-Bay to.
Gunowner99 - NRA Benefactor Life Member
Similar Threads
-
Custom gunsmithing screwdriver?
By Fossil4Life in forum GunsmithingReplies: 11Last Post: July 27th, 2019, 03:23 PM -
Need to borrow Torque Screwdriver
By havoc in forum GeneralReplies: 13Last Post: April 20th, 2013, 02:54 PM -
AMAZON has the S&W gunsmith screwdriver bits set
By dogngun in forum GunsmithingReplies: 1Last Post: June 23rd, 2010, 06:33 PM
Bookmarks