Results 1 to 9 of 9
Thread: AR pistol build help needed
-
February 28th, 2019, 09:28 AM #1Member
- Join Date
- Feb 2011
- Location
-
Nanticoke,
Pennsylvania
(Luzerne County) - Posts
- 36
- Rep Power
- 0
AR pistol build help needed
so bought a AR pistol kit build I got the lower all day but having some issues with the upper. Barrel, dust cover, hand guard, forward assist. Any one willing to help? near 18706 thanks
-
February 28th, 2019, 10:38 AM #2
Re: AR pistol build help needed
If I was closer I'd be more than happy to help. But since I'm a ways, here is where I learned.
https://m.youtube.com/watch?v=p8sY5CQmlHI
-
February 28th, 2019, 10:59 AM #3
Re: AR pistol build help needed
Some details would be helpful, simple things like.....what is the problem? There are plenty of videos on Youtube that walk you through the process.
-
February 28th, 2019, 11:16 AM #4
-
February 28th, 2019, 11:17 AM #5Super Member
- Join Date
- Feb 2015
- Location
-
Doylestown,
Pennsylvania
- Age
- 60
- Posts
- 528
- Rep Power
- 20248537
Re: AR pistol build help needed
All you need is the right tools to install the barrel nut, everything else is easier then putting a lower together.
,
-
March 2nd, 2019, 03:50 PM #6Junior Member
- Join Date
- Oct 2018
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Posts
- 4
- Rep Power
- 0
Re: AR pistol build help needed
So you didn't say what kind of handguard, barrel nut, etc... but you WILL need a torque wrench to properly install the barrel nut.
Also, when installing the barrel, don't tap/hammer on the muzzle. Apply some aero grease (or something similar) to the outside of the barrel extension and the inside of the upper where it inserts, get the barrel aligned and in as much as you can by hand and tap the back of the receiver with a non marring mallet while holding the barrel. It may help to heat the upper receiver on the threaded portion where the barrel inserts.
-
March 2nd, 2019, 08:09 PM #7Member
- Join Date
- Feb 2011
- Location
-
Nanticoke,
Pennsylvania
(Luzerne County) - Posts
- 36
- Rep Power
- 0
Re: AR pistol build help needed
issue was the handguard wouldn't line up with the screw holes in the barrel nut. here the company never sent me some washers it was missing to make up the space for the threads all is well now thanks guys. never built one before and couldn't find any videos that were similar to the kit I had.
-
March 3rd, 2019, 08:26 PM #8Junior Member
- Join Date
- Oct 2018
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Posts
- 4
- Rep Power
- 0
Re: AR pistol build help needed
Glad things worked out for you. I built a pistol not too long ago and the hand guard I used was definitely the hardest part.
-
March 4th, 2019, 08:28 PM #9Member
- Join Date
- Feb 2011
- Location
-
Nanticoke,
Pennsylvania
(Luzerne County) - Posts
- 36
- Rep Power
- 0
Similar Threads
-
9mm vs 5.56 AR Pistol Build - UPDATE: 5.56 - Help me Build One!
By Emptymag in forum PistolsReplies: 109Last Post: October 14th, 2016, 11:19 PM -
opinion needed on Remington 700 build
By Truck in forum RiflesReplies: 8Last Post: September 2nd, 2014, 09:11 PM -
advice needed would like to kit build a rifle
By bodymangt in forum GunsmithingReplies: 6Last Post: March 22nd, 2013, 01:04 PM -
I want to build a custom AR, advice needed
By sinful in forum GeneralReplies: 12Last Post: October 16th, 2008, 06:50 PM
Bookmarks