Pennsylvania Firearm Owners Association
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2011
    Location
    Lebanon, Pennsylvania
    (Lebanon County)
    Posts
    220
    Rep Power
    969287

    Default Brownells Alums-Hyde II Spray on finish anyone?

    So Ive been working on a beaten Marlin 336 pre-crossbolt safety Ive obtained in the last several weeks0. Apparently it was sitting in a garage for a few years and needed taken down to the screws and a mineral spirits bath for a week and extensive brushing.

    I had tried the cold bluing kit from Birchwood Casey and I'm pleased with the smaller pieces and screws. However the frame, barrel and magazine tube look horrible. Tried a 2nd time after a few youtube "tip" videos with the same results. So at this point I'm looking at other options.


    Came across this online and ordered it:

    https://www.amazon.com/Brownells-Alu...oEL&ref=plSrch

    I have virtually no experience with this. So here's my question:

    Has anyone used this specifically and if so how were the results? Any tips or tricks to provide?

    I'm fairly certain that this is pretty much similar to the aerosol duracoat and ceramicoat style finishes in terms of application. From my reading I need to make sure that the metal is warm and completely dry and evenly spray several coats with a few minutes in between to make sure it sets evenly.

    Any information is welcome.

  2. #2
    Join Date
    Aug 2018
    Location
    Cleveland, Ohio
    Posts
    2
    Rep Power
    0

    Default Re: Brownells Alums-Hyde II Spray on finish anyone?

    I have used it and had great results. As you said above warm the part up before painting and make sure it is properly de-greased and dry.

    The one draw back was that it literally took several weeks to fully cure.
    Dont be impatient let it sit.

  3. #3
    Join Date
    Jul 2013
    Location
    Milford, Pennsylvania
    (Pike County)
    Posts
    66
    Rep Power
    378129

    Default Re: Brownells Alums-Hyde II Spray on finish anyone?

    Old type spray on paint type finish. There are better ones. Durakote and Cerakote.
    JC Blauvelt Gunsmith,Inc. JCBgunsmith.com

  4. #4
    Join Date
    Apr 2009
    Location
    Walnutport, Pennsylvania
    (Northampton County)
    Posts
    79
    Rep Power
    9616

    Default Re: Brownells Alums-Hyde II Spray on finish anyone?

    I've used that on a beater AR i wanted to camo paint and it came out really well and has held up to lots of abuse the last few years. For the price, I was happy with the results. I cleaned all parts with Acetone before applying. It did not adhere to the magpul stock as well as the metal parts. I had mine in heated garage and cured within 48hours. Just my experience

Similar Threads

  1. Cerakote, Duracoat, Aluma Hyde, Krylon...
    By Sgt.K in forum General
    Replies: 3
    Last Post: August 17th, 2016, 04:38 PM
  2. Stone finish from a spray can.
    By SigSauer226 in forum Gun Pictures
    Replies: 6
    Last Post: March 1st, 2013, 06:20 PM
  3. Whitehall Alums
    By RYB44 in forum General
    Replies: 6
    Last Post: March 13th, 2009, 01:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops