Results 1 to 10 of 10
Thread: remanufactured ammo
-
November 11th, 2018, 06:31 PM #1Member
- Join Date
- Dec 2017
- Location
-
Leechburg,
Pennsylvania
(Westmoreland County) - Posts
- 55
- Rep Power
- 2262179
remanufactured ammo
Seen a lot of opinions on the use of factory remanufactured ammo. a lot of good and bad. Its cheaper than new obviously, but my concern is is it safe? do you get a lot of bad rounds? ie failure to load, fire, eject etc? Talk to me
-
November 11th, 2018, 07:04 PM #2
Re: remanufactured ammo
Depends on who may have re-manufactured it. And if it shoots better in your firearm.
Who re-manufactured the items that you are concerned about?
What are you considering shooting in the firearms you own? And your distance/accuracy expectations?
Would you possibly consider posting links to what made this "good" or "bad"?
Welcome to the forum.- bamboomaster
-
November 11th, 2018, 07:23 PM #3
Re: remanufactured ammo
I am a commercial bullet caster amd supply projectiles to multiple ammunition manufactures. Yes some is remanufactured and some is made with new brass.
Just make sure the person/company your buying from is licensed and insured. Other then that the big question is does it shoot good in your gun ?www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
November 11th, 2018, 10:04 PM #4Member
- Join Date
- Dec 2017
- Location
-
Leechburg,
Pennsylvania
(Westmoreland County) - Posts
- 55
- Rep Power
- 2262179
Re: remanufactured ammo
Just dont want to have to buy 1000 rnds and it blows up or something. guess i could get a box or 2 and see
-
November 11th, 2018, 10:13 PM #5
Re: remanufactured ammo
If you have identified a specific brand and load that you might want, ask about it and you will be told what is known. There are a lot of commercial reloads out there and most are not significantly more of a gamble than any commercial new ammo. There are a relative few who have had a worse than average reputation or more recalls than others and these are generally a known factor.
Whenever considering a bulk purchase it is almost always a good idea to try a box or two to see how it works for you in your specific guns. This is true if the ammo is new, reloaded, or surplus and brand does not matter.Illegitimus non carborundum est
-
November 12th, 2018, 08:02 AM #6
Re: remanufactured ammo
I've shot a couple thousand rounds Freedom munitions out of my AR with no problems. Those were used brass. I can't remember the brand I'm shooting now. It's also remanufactured. No problem except a couple rounds had primers that were upside down. I've also shot a bunch of .44 magnum from LAX ammo which has also been great. If you just want something to shoot that's OK for accuracy then remanufactured is the way to go.
Any vote for a third party is a vote for a Democrat. You are the enemy.
-
November 12th, 2018, 07:27 PM #7Super Member
- Join Date
- Sep 2008
- Location
-
Private,
Pennsylvania
- Posts
- 821
- Rep Power
- 8262019
Re: remanufactured ammo
When in doubt, invest in some reloading equipment. It's a great hobby, and you end up at the range more.
-
December 5th, 2018, 03:47 PM #8Super Member
- Join Date
- Oct 2012
- Location
-
Jim Thorpe,
Pennsylvania
(Carbon County) - Posts
- 675
- Rep Power
- 2079673
Re: remanufactured ammo
I bought some "Assembled" ammunition at a gun show from a gun shop. It was all new component ammo for cartridges that were not loaded anymore. I was shooting a 99 Savage and the first round jammed the lever. I did not load a second. Looking in the Hornady load book, there was a 10% reduction note for older rifles. I loaded some of my own up near the top of the 10% reduction and extraction became stickey. Not really abnormal with hot loads and rear locking rifles. I NEVER again bought loaded ammo outside of factory ammo. That is my policy, do what you want.
-
December 5th, 2018, 04:00 PM #9
Re: remanufactured ammo
-
December 5th, 2018, 04:03 PM #10
Re: remanufactured ammo
I've shot some remans. Been my experience there wasn't a whole lot of cost savings over new unless it's some kind boutique or rare cartridge. In that case it's more worth the investment to reload imho.
Similar Threads
-
9mm ammo. Remanufactured or Russian WPA?
By BB MBD in forum Ammunition & ReloadingReplies: 6Last Post: January 10th, 2014, 09:30 PM -
Ultramax Remanufactured Ammo
By Zeke2A in forum Ammunition & ReloadingReplies: 3Last Post: November 5th, 2011, 10:11 PM -
Black Hills Remanufactured .223
By Tiadaghton44 in forum GeneralReplies: 6Last Post: May 15th, 2009, 08:07 PM
Bookmarks