Pennsylvania Firearm Owners Association
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2014
    Location
    The burgh, Pennsylvania
    (Washington County)
    Posts
    86
    Rep Power
    52923

    Question Need AK47 RECOIL PAD perfectly fitted!

    I want to replace the metal plate on my Boyds Russian red wood stock w a traditional soft rifle one. Want it to fit perfectly around the perimeter and blend perfectly smoothly to the stock like on my hunting rifles that came with them from the factory. Any length is fine between 7-20mm. Should have some give to it, not the ones that are hard as bricks. Can ship the stock out for it.

    Im in washington Pa just south of Pittsburgh, willing to drive if it can be fitted and done on the spot!





  2. #2
    Join Date
    Apr 2013
    Location
    On top of a hill, Pennsylvania
    Posts
    5,949
    Rep Power
    21474847

    Default Re: Need AK47 RECOIL PAD perfectly fitted!

    You would start with an oversized one of choice and then sand it down to fit on a belt sander or by hand. You should be able to walk Into any local Smith and they should be able to do this and have a set price since this is some pretty basic and standard stuff.

    I typically use this one on all my AK's with wood furniture and my shooter SKS rifles. I don't care about the recoil as I use it to extend my LOP due to my size.

    https://www.amazon.com/AK47-STOCK-BU.../dp/B003BMDIHG
    Last edited by Hodgie; October 16th, 2018 at 01:13 PM.

  3. #3
    Join Date
    Jun 2014
    Location
    The burgh, Pennsylvania
    (Washington County)
    Posts
    86
    Rep Power
    52923

    Default Re: Need AK47 RECOIL PAD perfectly fitted!

    Yeah I saw that one. Sure it feels good but I want something that’s perfectly blended to the stock and looks like it came that way. Any idea on what this is going to cost? More than 70$ all said and done?

Similar Threads

  1. OC Encounter with the PPD - Perfectly Neutral.
    By ViperGTS19801 in forum Open Carry
    Replies: 24
    Last Post: March 29th, 2012, 11:42 AM
  2. AK47 Recoil Reducing Stock
    By JCassidy in forum Rifles
    Replies: 10
    Last Post: January 24th, 2010, 01:40 PM
  3. Air Force One being re-fitted
    By sluggie24 in forum General
    Replies: 25
    Last Post: November 17th, 2008, 02:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops