Pennsylvania Firearm Owners Association
Results 1 to 10 of 10

Thread: HEXMAG recall

  1. #1
    Join Date
    Oct 2008
    Location
    USN Retired, Pennsylvania
    (Monroe County)
    Posts
    3,042
    Rep Power
    21474849

    Default HEXMAG recall



    OOOPS

    We have recently determined that the Hexmag .308/SR-25 10 Round manufactured by HexMag, Inc. and sold by Sentry Products Group can accept one additional round over the stated capacity. The magazine’s ability to accept one more cartridge could lead to violations of state magazine limit restrictions. Additionally, the ability to accept one additional round over the stated 10 round capacities could cause consumers who have loaded more than ten into the magazine to believe that the magazine and/or firearm is empty when stated amount of rounds are fired, and could lead to unintentional discharges

    Consumer safety is our first priority. If your .308/SR-25 10 ROUND MAGAZINES contains a black riser (depicted below left), then your magazine is subject to this recall. Please contact us immediately to facilitate the replacement of your .308/SR-25 10 Round Magazines at our factory at no charge to our customers.

    DO NOT use your .308/SR-25 10 Round Magazines unless it has been assembled with the new replacement riser! Any unintended discharge has the potential for causing injury or death.

    HOW TO DETERMINE IF .308/SR-25 10 ROUND MAGAZINES NEEDS REPLACED:
    Load your magazine with .308 cartridges of the until the magazine can no longer accept any additional cartridges. Remove each cartridge contained in the magazine and count the total number of cartridges that were capable of fitting within the magazine. If that number exceeds 10, the magazine is subject to this recall. Alternatively, if your .308/SR-25 10 ROUND MAGAZINES contains a black riser (depicted below left), then your magazine is subject to this recall.
    REPLACING YOUR AFFECTED PRODUCT
    If you own a magazine that is subject to this recall, Sentry Products Group will provide a replacement magazine configured with the replacement riser (depicted below right) and ship it to you at no additional cost.
    CONTACT US IMMEDIATELY!
    We will ask for your Name, Address, Telephone Number, Number of Magazines, and provide to you an RMA # for return and tracking purposes. Once you have been provided an RMA #, you will need to remove the riser from your affected product, and send the affected riser to: SENTRY Products Group, LLC, 2929 S. Cole Road, Boise ID 83709. Please discard the remaining components of the affected magazine. Recalled Risers will not be returned. Upon receipt, Sentry will return a new replacement magazine.

    CONTACT SENTRY (Monday – Friday, 8:00 AM to 5:00 PM EST)
    Email: 308MagRecall@SentryLTP.com | Recall Hotline: 877.726.7328 | EXT FAX: 757.689.6066

  2. #2
    Join Date
    Sep 2009
    Location
    POCONO MOUNTAINS, PENNSYLVANIA, Pennsylvania
    (Monroe County)
    Age
    67
    Posts
    2,439
    Rep Power
    19770140

    Default Re: HEXMAG recall

    OH FUDGE !

  3. #3
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    22,984
    Rep Power
    21474870

    Default Re: HEXMAG recall

    That's the saddest recall ever.
    You're Invited!Pittsburgh PAFOA GROUP SHOOT! - THIS SaturdayAug 18th (Link)

  4. #4
    Join Date
    Aug 2013
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Age
    60
    Posts
    1,807
    Rep Power
    21474842

    Default Re: HEXMAG recall

    hexmag loophole

    sell for 4X on the street and then go buy better mags..

  5. #5
    Join Date
    Jun 2008
    Location
    East side of the ANF, Pennsylvania
    Posts
    5,240
    Rep Power
    21474852

    Default Re: HEXMAG recall

    Hey Hexmag, it's 0xA, not 0xB.

    Noah
    Sixth Level Grand Master Black Belt Ikea Furniture Assembler.

  6. #6
    Join Date
    May 2006
    Location
    127.0.0.1, Pennsylvania
    (Lancaster County)
    Posts
    16,525
    Rep Power
    21474865

    Default Re: HEXMAG recall

    Quote Originally Posted by Noah_Zark View Post
    Hey Hexmag, it's 0xA, not 0xB.

    Noah
    0b1100011% of the people here didn't get that.
    Rules are written in the stone,
    Break the rules and you get no bones,
    all you get is ridicule, laughter,
    and a trip to the house of pain.

  7. #7
    Join Date
    Jun 2008
    Location
    East side of the ANF, Pennsylvania
    Posts
    5,240
    Rep Power
    21474852

    Default Re: HEXMAG recall

    Quote Originally Posted by streaker69 View Post
    0b1100011% of the people here didn't get that.
    Well, I can't help it. It's a blessing and a curse.

    Noah
    Sixth Level Grand Master Black Belt Ikea Furniture Assembler.

  8. #8
    Join Date
    Apr 2013
    Location
    Glockin, Pennsylvania
    (Montgomery County)
    Posts
    2,068
    Rep Power
    14373447

    Default Re: HEXMAG recall

    The only thing concerning about this is getting a malfunction from loading 11 with too much spring tension. Screw 10 round commie states and screw not treating every firearm as if it's loaded.

  9. #9
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    22,984
    Rep Power
    21474870

    Default Re: HEXMAG recall

    The ATF has determined that loading more than the designated number of rounds in a magazine constitutes remanufacturing and thus creates a full-semi-auto with a shoulder thing that goes up.

    Do not attempt to load past stated capacity!
    You're Invited!Pittsburgh PAFOA GROUP SHOOT! - THIS SaturdayAug 18th (Link)

  10. #10
    Join Date
    Jul 2018
    Location
    pville, Pennsylvania
    (Chester County)
    Posts
    25
    Rep Power
    0

    Default Re: HEXMAG recall

    that one extra round turns your compliant rifle into a public health hazard.

Similar Threads

  1. Hexmag, Anyone use them?
    By God's Country in forum General
    Replies: 7
    Last Post: March 11th, 2018, 04:09 PM
  2. WTS: HEXMAG AR15 5.56 30RD MAG HX30-AR-BLK (BLACK) $11.99
    By Cope's Dist. in forum Commercial/Business
    Replies: 0
    Last Post: May 5th, 2017, 12:27 PM
  3. Replies: 9
    Last Post: December 22nd, 2016, 03:33 PM
  4. WTS: HEXMAG AR15 5.56 30RD MAG HX30-AR-BLK (BLACK) $9.99
    By Cope's Dist. in forum Classifieds Archive
    Replies: 0
    Last Post: April 7th, 2016, 02:16 PM
  5. Replies: 10
    Last Post: September 11th, 2013, 09:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops