Results 1 to 7 of 7
Thread: riser for red dot
-
July 21st, 2018, 05:05 PM #1Senior Member
- Join Date
- Jan 2011
- Location
-
Pgh
(Allegheny County) - Posts
- 410
- Rep Power
- 100515
riser for red dot
I have a Hi Point .9 mm carbine and I would like to mount the red dot up another inch higher. Amazon has a ton of them, but they don't seem long enough. The two screws that hold mine on to the Weaver rail are one and three-quarter inches part, so I think I might need 2 of them. Can anybody suggest anything before I go off the deep end. Very frustrating trying to deal through the mail. Thanks follows
Last edited by joeyj; July 21st, 2018 at 05:07 PM. Reason: miss spelled
-
July 21st, 2018, 05:34 PM #2
-
July 21st, 2018, 07:22 PM #3Banned
- Join Date
- Jul 2018
- Location
-
pville,
Pennsylvania
(Chester County) - Posts
- 97
- Rep Power
- 0
Re: riser for red dot
I was using this UTG slim riser on my AR pistol, it's not tier 1 operator status but did hold zero for $20.
There is a 1 inch tall version that will probably work for your needs.Last edited by mixednuts; July 21st, 2018 at 07:26 PM.
-
July 22nd, 2018, 11:26 PM #4Senior Member
- Join Date
- Jan 2011
- Location
-
Pgh
(Allegheny County) - Posts
- 410
- Rep Power
- 100515
Re: riser for red dot
It's a model 995. The optic has '' rd30 '' written on it.
PS the .9mm was a typo, but if you have a third nipple, please post it and we will all learn something.
-
July 22nd, 2018, 11:29 PM #5
-
July 22nd, 2018, 11:30 PM #6
-
July 23rd, 2018, 08:00 AM #7
Re: riser for red dot
Considering what you're working with anything like this will do.
https://www.amazon.com/dp/B075S3DZGY...&pd_rd_w=yorOP
My aforementioned trip nip is well documented in the hallowed annals of Poofa.How can you have any cookies if you don't drink your milk?
Similar Threads
-
riser
By Rodeno in forum OpticsReplies: 4Last Post: December 17th, 2013, 09:40 PM -
Riser
By Rodeno in forum OpticsReplies: 0Last Post: September 6th, 2013, 07:47 PM -
riser on an ar-15
By freeeire1916 in forum GunsmithingReplies: 2Last Post: March 24th, 2011, 07:42 PM
Bookmarks