Results 1 to 3 of 3
Thread: AR 15 in .41 Magnum.
-
June 17th, 2018, 02:52 PM #1Junior Member
- Join Date
- May 2008
- Location
-
Bellefonte,
Pennsylvania
(Centre County) - Posts
- 29
- Rep Power
- 0
AR 15 in .41 Magnum.
I am considering building one in .41 Magnum. Where can I obtain a 16" barrel? Also need information on a BCG. I checked my 458 Socom BCG and it is to small.
-
June 17th, 2018, 03:05 PM #2Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: AR 15 in .41 Magnum.
Chances are you will not find a bolt that will fit and function reliably. Too much material will have to be milled out to fit the head of the case
-
June 19th, 2018, 07:41 PM #3
Re: AR 15 in .41 Magnum.
The .458socom bolt is already thin enough, the .41mag rim is another .020" larger than the .458 socom rim. Then there is getting a magazine to work right with rimmed .41mag brass. Better off just going with a 10mm or a .44automag if you want something more exotic. You can use a .458socom bolt with the .44automag.
Similar Threads
-
Mixed Magnum & Non-Magnum Pistol Primers
By MMH in forum Ammunition & ReloadingReplies: 12Last Post: October 28th, 2016, 09:13 PM
Bookmarks