Results 1 to 8 of 8
-
May 14th, 2018, 07:41 PM #1Junior Member
- Join Date
- May 2018
- Location
-
Clearfield,
Pennsylvania
(Clearfield County) - Posts
- 2
- Rep Power
- 0
Converting makarov from 380 to 9x18 makarov
Hello, I'm looking to buy a makarov, i'd like it in russian however im having a hard time finding it in 9x18Makarov I see them everywhere in .380 how hard is it to convert? i've heard it's just a simple barrel change but i don't want to buy into a 380 only to find out I cannot convert it, and it's not a job for a newbie to gunsmithing if anyone can recommend me a gunsmith i'd really appreciate it!
-
May 14th, 2018, 08:42 PM #2
Re: Converting makarov from 380 to 9x18 makarov
Conversion entails:
1) Driving out the pin that retains the .380 barrel in the receiver.
2) Using an arbor press, hydraulic press, or a beefy screw press made from two pcs of all thread and substantial crossmembers, press out the .380 barrel to the rear. Is sometimes helps to heat the round boss which locates the barrel in the frame. A press is a MUST; don't think you can use a BFH. Also, you need to construct some fixtures to support the frame and barrel correctly to prevent damage or distortion.
3) Press in the 9x18 barrel.
4) If it's a NOS barrel that's never been mounted, you will need to drill through the barrel shank for the retaining pin.
5) Press in the pin.
6) Reassemble.
NoahWisdom and knowledge shall be the stability of thy times.
-
May 14th, 2018, 10:15 PM #3Grand Member
- Join Date
- Nov 2017
- Location
-
New Tripoli,
Pennsylvania
(Lehigh County) - Posts
- 2,370
- Rep Power
- 21474845
Re: Converting makarov from 380 to 9x18 makarov
Not that hard to come by https://www.classicfirearms.com/maka...9x18-semi-auto
-
May 15th, 2018, 06:28 AM #4Banned
- Join Date
- Sep 2017
- Location
-
Philadelphia-ish,
Pennsylvania
(Philadelphia County) - Age
- 53
- Posts
- 61
- Rep Power
- 0
Re: Converting makarov from 380 to 9x18 makarov
If you cant find a Makarov in 9x18 Makarov, you haven't been looking long enough.
-
May 15th, 2018, 11:04 AM #5
Re: Converting makarov from 380 to 9x18 makarov
I see way more 9x18's than 9mm Kurz.
Last edited by RockIsland; May 15th, 2018 at 01:18 PM. Reason: Fucking autocorrect!
-
May 15th, 2018, 12:43 PM #6
Re: Converting makarov from 380 to 9x18 makarov
-
May 15th, 2018, 01:59 PM #7Junior Member
- Join Date
- May 2018
- Location
-
Clearfield,
Pennsylvania
(Clearfield County) - Posts
- 2
- Rep Power
- 0
Re: Converting makarov from 380 to 9x18 makarov
I find bulgarians all the time in 9x18 , most of the Russian ones I see are typically in .380 granted i'm looking at local ad sites. Been meaning to call a store over in Bellefonte been there a few times and he's had them
-
May 19th, 2018, 05:48 PM #8
Re: Converting makarov from 380 to 9x18 makarov
The cased head/rim is also slightly bigger in dia so the breach face of the slide might need modification. .390 for 9mm Mak vs .371 for .380.
I don't speak English , I talk American!
Bookmarks