Full semi auto for CZ Scorpion!

[ExFlyinguy]

They suck that bad?

FWIW I got mine in 2017 & I hear that 2018's are better. As far as mine, it's the heaviest trigger I've ever shot. I've never shot a TAVOR SAR but they sound about the same when people describe them.

I find myself looking sometimes to make sure the safety is off just because the trigger is so heavy/stiff. I've read/viewed/heard that they were 11+ lbs. I don't have a trigger gauge. Lots of videos for DIY spring replacements. Honestly I think I'll just adapt and get used to it. I'm don't intend any precision shooting with it.

Now I'm seeing a video that they are 6ish lbs on newer models.

[Smilez226]

They suck that bad?

You literally could attach a sludge hammer to any other trigger out there. And it would still be lighter then a stock evo trigger. First thing I did for mind was spring kit and polish. It’s like cutting warm soft butta now. Lol

[Hodgie]

That’s pretty surprising especially coming from CZ. I’m a huge CZ fan and would like a scorpion pistol but they are too pricy for me and i rarely see them on the 2nd hand market which says a lot about it’s quality.

[Justin///M]

You literally could attach a sludge hammer to any other trigger out there. And it would still be lighter then a stock evo trigger. First thing I did for mind was spring kit and polish. It’s like cutting warm soft butta now. Lol

I just did the spring kit and it's a vast improvement, a little gritty. I imagine your polishing is icing on the cake.

Before the kit, I measured mine at 8 pounds, after, about 4.5 pounds.

There's a lot of variance in the trigger pulls in these it seems.

[Justin///M]

That’s pretty surprising especially coming from CZ. I’m a huge CZ fan and would like a scorpion pistol but they are too pricy for me and i rarely see them on the 2nd hand market which says a lot about it’s quality.

Minus the fun bits, CZ claims the scorpion was imported as is from the auto version..., which makes it a military/police gun, which seems to usually mean heavy trigger.

[ExFlyinguy]

I really like the Scorpion, but I favor the MPX.

[Justin///M]

I really like the Scorpion, but I favor the MPX.

If I'd ever get my stamp, I'll get to decide which one I prefer.

[ExFlyinguy]

If I'd ever get my stamp, I'll get to decide which one I prefer.

I have to say that I'm amazed that the HEAVY bolt in the Scorpion can just ride in that polymer frame without chewing it up

[Smilez226]

I just did the spring kit and it's a vast improvement, a little gritty. I imagine your polishing is icing on the cake.

Before the kit, I measured mine at 8 pounds, after, about 4.5 pounds.

There's a lot of variance in the trigger pulls in these it seems.

I don’t have anything to measure the pull of my trigger. But it probably one of the lightest pulls I own.

[Smilez226]

Oh fuck, I never thought I'd want one of these, my I think I'm going to have to convert my scorpion to full semi auto.

There are videos popping up o. Facebook of people who got these triggers and shooting them, and wow I am impressed so far.