Results 1 to 9 of 9
Thread: CZ 75 B problem
-
April 24th, 2018, 12:55 PM #1Senior Member
- Join Date
- Jan 2011
- Location
-
Pgh
(Allegheny County) - Posts
- 410
- Rep Power
- 100515
CZ 75 B problem
I've been having some problems with my CZ. After the last round is fired the slide will not stay open. Taking a wild guess at it, I probably put 1000 rounds through it.
I thought I saw this once before on the form. Somebody said a spring needs replaced. Doesn't need to go back to CZ?, Or is that something I can do. I appreciate your help. Joe
-
April 24th, 2018, 01:28 PM #2
Re: CZ 75 B problem
Try a different magazine first and make sure it's not a ProMag.
-
April 24th, 2018, 02:12 PM #3
Re: CZ 75 B problem
With only 1000 rnds through it, I'm with RockIsland - it's probably the mag. Try a new one or a new mag spring.
-
April 24th, 2018, 02:48 PM #4
Re: CZ 75 B problem
Where do you shoot ? Depending on timing I could possibly meet you and you can try one of my magazines if you only have the one mag and don’t have any others to tell if a mag problem.
-
April 24th, 2018, 04:49 PM #5Grand Member
- Join Date
- Dec 2010
- Location
-
Easton,
Pennsylvania
(Northampton County) - Posts
- 1,378
- Rep Power
- 21474851
Re: CZ 75 B problem
I specialize in Cz 's and Cz' clones, you are maybe riding the slide stop or you are looking at a weak mag spring. You can get plus 10 power mag springs from Wolff Gunsprings ,that will solve a mag spring issue, Replacement mags such as Mecgar mags from Greg Cote LLC will also solve weak mag spring issues and they are way cheaper than factory CZ mags.
www.EastonFirearmsRefinishing.com Owner/Operator, NRA Pistol Instructor
-
April 24th, 2018, 05:40 PM #6
Re: CZ 75 B problem
I was made to believe the Mecgar mags were the factory mags cz uses.
-
April 24th, 2018, 06:21 PM #7
Re: CZ 75 B problem
Mec-gar mags are good to go. They are very well made, I've never had an issue with one ever.
They do make OEM mags for quite a few guns. Everyone says they make the CZ mags but I don't know for sure.
They make Sarsilmaz mags, and my RIA came with two. I'm pretty sure they make some for Kel-tec too. I also have them for CZ's and HiPower. I wish they made them for the rami.
They make them for Sig, Beretta, S&W, Ruger and most popular pistols.
I also got a few extra 1911 8 rounders after I saw how well they worked.
-
April 24th, 2018, 07:28 PM #8Senior Member
- Join Date
- Jan 2011
- Location
-
Pgh
(Allegheny County) - Posts
- 410
- Rep Power
- 100515
-
April 29th, 2018, 03:45 PM #9Senior Member
- Join Date
- Jan 2011
- Location
-
Pgh
(Allegheny County) - Posts
- 410
- Rep Power
- 100515
Re: CZ 75 B problem
quite by accident I stumbled across a gut saying when you clean your firearms, don't forget to periodically take your mags apart and clean them. I never had my part so I decided to look at and see what they look like. There was all kind of residue inside. I took some hoppe's foam cleaner and scrub them out with the small brush, turns out that they were filthy. Went to the range next day, and my problem was solved, the slide stayed back.
Similar Threads
-
Update: 1911 ejection problem. - Actually extraction problem.
By cobra2411 in forum GeneralReplies: 14Last Post: May 8th, 2016, 10:57 PM -
My problem
By glock4life in forum PistolsReplies: 19Last Post: June 1st, 2015, 12:13 AM -
AR Problem
By eaglesfan2018 in forum RiflesReplies: 17Last Post: February 13th, 2010, 01:43 PM -
My little problem with OC
By bripro in forum GeneralReplies: 13Last Post: June 7th, 2009, 07:25 AM -
I wish everyone had this problem
By edstephan in forum GeneralReplies: 25Last Post: October 27th, 2008, 08:15 PM
Bookmarks