Results 1 to 10 of 10
Hybrid View
-
February 21st, 2018, 07:33 PM #1Junior Member
- Join Date
- Jan 2013
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 22
- Rep Power
- 0
Can a semi-auto pistol fire without the bolt being fully closed?
I had a strange issue when shooting my Ruger Mk IV pistol today. I fired 4 or 5 clips with no issues, and then something strange happened on one shot. After I fired, there was a very strong powder smell, and I had powder residue on my trigger finger/hand. The round fired OK, but I took the pistol apart to make sure nothing was lodged in the barrel. Everything was clear. The gun fired without issue for the remainder of the day.
It almost seems like the bolt wasn't fully engaged when fired, and the gases escaped into the gun and through the gap in the trigger. Is that possible? If not, any ideas on what happened?
Any information is appreciated.
Thanks,
Joe
-
February 21st, 2018, 07:43 PM #2
Re: Can a semi-auto pistol fire without the bolt being fully closed?
Firearms can fire while out of battery but it's an indication of a large trouble and is very dangerous. If you think the pistol firearm while out of battery then you need to contact Ruger and send it in.
Join the GOA & save $5.00. https://www.gunowners.org/mac-subs-join-goa.htm
-
February 21st, 2018, 08:23 PM #3
Re: Can a semi-auto pistol fire without the bolt being fully closed?
It's a shame you could not recover that brass. I am wondering if it was an overcharged or defective round that breached the case and sprayed into the action. You fired 40-50 rounds before, and how many after this happened?
Illegitimus non carborundum est
-
February 21st, 2018, 09:18 PM #4
Re: Can a semi-auto pistol fire without the bolt being fully closed?
Out of battery discharges can happen. ....slam fires, bolts/carriers hitting a primer "just right", etc, etc.
Box magazine rimfire semiautos are very susceptible to out of battery discharges. The bolt/carrier cycling can be enough to do it. The bolt/carrier hits the rim to push the cartridge forward, and a highly sensitive charge of priming material in the rim can be ignited.
The compound the issue that nearly all semi-auto rimfire guns are blow back, nothing holds that chamber closed other than spring tension.
I had about half dozen out of battery firings with my old Remington Apache 77(synthetic gun) using truncated .22LR. Truncated rounds didn't feed properly from the box mag into the chamber. 90% would hangup on the ramp. The bolt slamming foward, with the cartridge not wanting to go into the chamber, was enough to smash the rim just enough to cause the cartridge to ignite. ...bolt open more than the length of a cartridge.RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
-
February 21st, 2018, 10:13 PM #5
-
February 21st, 2018, 10:18 PM #6
-
February 21st, 2018, 10:17 PM #7
Re: Can a semi-auto pistol fire without the bolt being fully closed?
Similar Threads
-
FN's new M249 SAW closed bolt semi auto for the citizen market
By wanneroo in forum RiflesReplies: 81Last Post: April 14th, 2015, 05:33 PM -
1919 Semi-auto by Ohio Rapid fire
By pstew in forum GeneralReplies: 6Last Post: January 18th, 2009, 09:09 AM -
1919 Semi-auto by Ohio Rapid fire
By pstew in forum GeneralReplies: 0Last Post: December 21st, 2008, 08:46 PM
Bookmarks