Results 1 to 10 of 22
Thread: glock 357 sig
-
February 26th, 2007, 03:39 PM #1Junior Member
- Join Date
- Feb 2007
- Location
-
Kingston,
Pennsylvania
(Luzerne County) - Posts
- 8
- Rep Power
- 0
glock 357 sig
I was hoping for some input on the 357 sig in the glock 32. I purchased on recently with the intention of also getting a 40 s&w barrel as to shoot both.
Any input on the effectiveness, etc. of the 357 vs. the 40?
-
February 26th, 2007, 05:43 PM #2
Re: glock 357 sig
I happen to have a Glock 32 which is currently wearing a .40 bbl. I also have a G23 which stays with its .40 bbl.
.357 is louder. Guys on neither side of you at the range will not like you.
Effectiveness how? Anyone on the internet will give you their reasons for which is the "better" round.
I have had some trainers tell me to shoot the biggest bullet you can comfortably shoot. Others tell me small and fast bullets are the way to go.
I usually shoot 180 gr Blazer for practice and 180 gr Gold dots for carry.
You can also shoot 165 or 155 gr bullets out of a .40.
I have also read that shooting lighter,hotter loads in .40 or just the .357 sig, the guns will wear out after 10k rounds or so. I had about 4K through the .357 before switching to a .40 bbl. I don't know if that statement is true.
I do not reload .357sig. I was going to but never followed up due to time issues.
Some people say the .357sig is a more accurate round. I don't notice any difference.
I quess it is just a matter of opinion or a cost of ammo issue.
Your choice.
later, 27handOpinions are like anal apertures. They all stink but mine.
-
February 26th, 2007, 06:01 PM #3
Re: glock 357 sig
i beilieve the 357 sig round has a higher velocity than the 40.sw i know that for sure some i saw some dude fire it and every time he did it i felt the sound waves go through my body a very loud round i guess itd be an accurate one too
Gott mit uns
-
February 26th, 2007, 09:03 PM #4Member
- Join Date
- Jan 2007
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 43
- Rep Power
- 0
Re: glock 357 sig
from hornady 357sig 124gr
Muzzle 50 yd 100 yd
1350/502 1208/405 1108/338
now 40sw 155gr
Muzzle 50 yd 100 yd
1180/479 1061/388 980/331
the 357sig is a fast round. placement is more important than which is bigger.
-
February 26th, 2007, 09:23 PM #5
Re: glock 357 sig
I prefer the Sig because I'm (usually) a fan of velocity over ft-lb but that's my opinion. I have shot the Glock 31 quite a bit and like it. I tried a similar change in my Glock 20 (10mm) and bought a 357 Sig barrel for it. The Sig barrel shot to a much different point of aim so I stopped using it.
Guns are good.
If you can't fry it you shouldn't eat it
Loud pipes save lives
Mom spelled backwards spells....mom
"Please don't squeeze the Charmin." ~ Mr. Whipple
-
February 26th, 2007, 10:21 PM #6Senior Member
- Join Date
- May 2006
- Location
-
City/Town/Rural,
Pennsylvania
(Westmoreland County) - Posts
- 476
- Rep Power
- 64967
Re: glock 357 sig
+1 on the loud! I've seen people cut their time on the range short when standing next to someone shooting .357 Sig. They walk out and say, "What is he shooting in there? Man, that's loud." Of course, they say the same thing about .44 Magnum.
One trainer has stated he likes the round for precisely that reason. He says that the report tends to make everyone run in the other direction.Never underestimate the value of early training.
-
February 26th, 2007, 10:27 PM #7
Re: glock 357 sig
The Glock G32 is the only Glock I ever sold to this point.
I really wanted to like the G32, but it wasn't for me.
It was indeed loud, and had a lot of muzzle flash. It also had a very snappy recoil compared to the nine and forty-fives I shoot the most. That was just me...
The thing I didn't like about the 357 Sig was the ammo I was getting.
I found that most of the ammo on the market was loaded well short of .357 magnum ballistics.
I ran only Double Tap ammo when I could get it. DT was a real handful and was expensive.
Lesser loads were no better than my G19 with +P+ ammo.
I hung onto the G19 and sold the G32 for a song to my buddy, who still owns it and really likes it.
As long as your happy!
-
February 26th, 2007, 11:52 PM #8Banned
- Join Date
- Feb 2007
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Posts
- 2,305
- Rep Power
- 0
Re: glock 357 sig
if we're talking combat effectiveness, the difference between the .357sig and .40 (and 9mm and .45 for that matter) is nil. When it comes to handguns, we're only concerned with penetration and permanent cavity when it comes to finishing the fight since the only way fights end with handguns it through CNS disruption or blood loss. Between all major duty calibers utilizing the proper loadings, we're talking within an inch of penetration and at most 1/10" of expanded diameter between any given load. Not enough to make a difference between a bad shot and a good shot.
-
February 27th, 2007, 08:08 AM #9Senior Member
- Join Date
- May 2006
- Location
-
City/Town/Rural,
Pennsylvania
(Westmoreland County) - Posts
- 476
- Rep Power
- 64967
-
February 27th, 2007, 10:53 AM #10Junior Member
- Join Date
- Feb 2007
- Location
-
Kingston,
Pennsylvania
(Luzerne County) - Posts
- 8
- Rep Power
- 0
Re: glock 357 sig
Thanks folks for your imput. I also heard that the bottle neck design of the sig is a big plus in avoiding jams.
Similar Threads
-
WTS GLOCK 22, XD 9mm, KEL-TEC P-11 9mm
By Glock22xd9 in forum GeneralReplies: 9Last Post: December 13th, 2006, 02:28 PM -
WTS Glock 19 3rd gen LIKE NEW
By sig-9 in forum GeneralReplies: 5Last Post: November 2nd, 2006, 10:13 AM -
Glock Day
By Mike45 in forum GeneralReplies: 14Last Post: October 19th, 2006, 02:10 AM
Bookmarks