Results 1 to 10 of 25
Thread: .308 Win./ 6.5 Creedmoor???
-
September 9th, 2017, 08:04 PM #1
.308 Win./ 6.5 Creedmoor???
Been reading a lot how the 6.5 CM is a better round than the .308 Win., any thoughts or comments on this?
-
September 9th, 2017, 09:23 PM #2Active Member
- Join Date
- Mar 2016
- Location
-
Windber,
Pennsylvania
(Somerset County) - Posts
- 142
- Rep Power
- 1014554
Re: .308 Win./ 6.5 Creedmoor???
I like the 6.5 especially after 500 yards. It's much better ballistically. Also about 1/3 less recoil than 308.
-
September 9th, 2017, 10:16 PM #3Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: .308 Win./ 6.5 Creedmoor???
6.5 creedmoor all day long.
Better ballistic coefficient
Higher muzzle velocity
Better terminal ballistics at long range
Less drop, and wind deflection
Less recoil
Slightly higher price per round though.And barrel life will be roughly 1/2 of a .308 barrel
-
September 9th, 2017, 11:28 PM #4
Re: .308 Win./ 6.5 Creedmoor???
It's best to have an AR10 with uppers for both .308 and 6.5CM or a pair of complete rifles one each.
-
September 10th, 2017, 01:08 AM #5Banned
- Join Date
- Oct 2012
- Location
-
Sarver,
Pennsylvania
(Butler County) - Posts
- 677
- Rep Power
- 0
Re: .308 Win./ 6.5 Creedmoor???
I have an Enfield in 7.62/308 and I've always thought 6.5 would be the alternative, namely in a Swedish Mauser. I also have a thing for 6.5 Grendel. Just seems that 6.5mm in general has a certain sacred geometry and physics to it when applied to projectiles. Now to support that idea 6.5 Creedmore is catching on, and 6.8SPC has essentially already caught on... based the same dynamics. 6.5 kills just as dead as .308 from just as far, and does it far more efficiently. There, I said it. The only concern would be where more momentum is desired butfor soft targets I think 6.5 is the superior choice. Unfortunately the market needs to catch up to the idea a bit.
-
September 11th, 2017, 12:55 PM #6Active Member
- Join Date
- Jul 2016
- Location
-
Murrysville,
Pennsylvania
(Westmoreland County) - Posts
- 197
- Rep Power
- 8958236
Re: .308 Win./ 6.5 Creedmoor???
-
September 11th, 2017, 03:39 PM #7
Re: .308 Win./ 6.5 Creedmoor???
SIGFAN86,
Barrel life? You mean life of a barrel before accuracy degrades for the type of shooting you're doing. Accuracy loss at 600 yards shooting iron sights will be measured differently than bench shooting with a scope at 600 yards. And shooting a scope rifle at 1000 yards, a drop in accuracy will be measured much differently than the first 2 examples. It really depends on your definition of accuracy and what's acceptable to you. One guy may shoot his 6.5 Creedmoor for 3K before he feels accuracy has degraded enough to replace the barrel. Another guy may only put 1K down his barrel before he replaces it.
However, you're not totally off base on your statement regarding barrel life on the 6.5 Creedmoor.
http://www.sincityprecision.com/6-5m...r-barrel-life/Last edited by Hawk; September 11th, 2017 at 04:00 PM.
Toujours prêt
-
September 11th, 2017, 04:41 PM #8Active Member
- Join Date
- Jul 2016
- Location
-
Murrysville,
Pennsylvania
(Westmoreland County) - Posts
- 197
- Rep Power
- 8958236
Re: .308 Win./ 6.5 Creedmoor???
Interesting read on the link Hawk. I read the article and the author states that some barrel brands are made from a harder steel than others. He also states the 6.5 will not last as long as the .308......but what he doesn't say is why. I'm not sure if the author is saying the .308 will continue to shoot well and not lose velocity because throat erosion doesn't effect the velocity on the .308 vs the 6.5. I can only assume that's what he means.
-
September 11th, 2017, 07:30 PM #9Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: .308 Win./ 6.5 Creedmoor???
Last edited by SIGFAN86; September 11th, 2017 at 07:38 PM.
-
September 11th, 2017, 07:34 PM #10Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: .308 Win./ 6.5 Creedmoor???
I agree, accuracy of a barrel is subjective. But the inherent cost of a high pressure/high velocity round is increased barrel throat wear. And it's been shown shot for shot a 6.5 creedmoor barrel will last roughly 1/2 as long as a 308 barrel. Now at what point do you call a barrel shot out? That's up to the shooter and their preferences/wallet.
Personally if I no longer can get 1moa accuracy from a barrel that I know shot .5moa 2k rounds ago, I'll call it spent and will be in search of a new one
Similar Threads
-
6.5 Creedmoor
By cfrank122 in forum RiflesReplies: 5Last Post: January 14th, 2017, 04:13 PM -
Project Rem 700 6.5 creedmoor
By arjohnson in forum RiflesReplies: 22Last Post: January 12th, 2017, 04:08 AM -
6.5 Creedmoor for Coyote and Fox
By yeahbuck36 in forum HuntingReplies: 5Last Post: January 11th, 2017, 01:49 PM -
6.5 creedmoor rifle
By jlb0305 in forum RiflesReplies: 14Last Post: November 21st, 2016, 08:18 AM -
Thinking about the Creedmoor
By tollster in forum HuntingReplies: 21Last Post: March 3rd, 2015, 04:00 PM
Bookmarks