Pennsylvania Firearm Owners Association
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2007
    Location
    Apolacon Township, Pennsylvania
    (Susquehanna County)
    Age
    77
    Posts
    5,806
    Rep Power
    21474859

    Default Load Development 6.5 X 55 S.E.

    Continuing work with my CZ 550.
    Here are the results from testing Norma's MRP powder. The powder seems very good. Results look OK. Somewhat odd that the lightest charge with the 100 gr. bullet gave the best accuracy. While the heaviest charge gave 120 gr. bullets the best accuracy.
    These loads are based on Norma Data for bullets of similar weight.

    I wish one (or more) of the powder or bullet companies would do some serious work on the 6.5 X 55 S.E. (AKA SKAN). Modern actions can take much more pressure than the old mil-surp Swedish Mausers. Vihta Vuori has some but only for Lapua bullets, Speer has some but for only 3 bullets.
    Attached Images Attached Images
    Attached Files Attached Files


    "Those who can make you believe absurdities can make you commit atrocities".

  2. #2
    Join Date
    Jun 2010
    Location
    E-Town, Pennsylvania
    (Lancaster County)
    Posts
    22
    Rep Power
    0

    Default Re: Load Development 6.5 X 55 S.E.

    Take any published load and just slowly work up the powder until you get pressure signs. My CBI barreled savage 110 will push any 140 gr bullet over 2900 fps using either H4831sc or IMR4955. And very accurate to boot!

Similar Threads

  1. Load Development 6.5X55 S.E.
    By Brick in forum Ammunition & Reloading
    Replies: 8
    Last Post: December 2nd, 2014, 10:39 AM
  2. 308 Load Development
    By MMH in forum Ammunition & Reloading
    Replies: 7
    Last Post: May 23rd, 2014, 01:25 AM
  3. New Load Development
    By MPietrantonio in forum Ammunition & Reloading
    Replies: 13
    Last Post: May 30th, 2013, 08:48 PM
  4. Replies: 10
    Last Post: January 18th, 2010, 04:15 PM
  5. AR load development question
    By ah141nj in forum General
    Replies: 24
    Last Post: December 26th, 2009, 01:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •