Results 1 to 4 of 4
Thread: Swiss K31 Reloading
Hybrid View
-
August 12th, 2017, 01:47 PM #1Member
- Join Date
- Mar 2017
- Location
-
verona,
Pennsylvania
(Allegheny County) - Posts
- 45
- Rep Power
- 0
Swiss K31 Reloading
Hi Everyone,
anybody doing any reloading for the K31? if so what what do you use? any places you know for deals on brass or bullets would be appreciated also.
thanks
-
August 16th, 2017, 02:33 AM #2
Re: Swiss K31 Reloading
I use IMR-4350 and 150gr or 165gr Hornady bullets. Bullets are easy........being that they are .308 caliber. As for brass, I haven't looked in years as I bought a few hundred cases from Graf & Sons several years ago. Graf shows they have Norma and Prvi Partizan in stock.
-
August 21st, 2017, 07:46 AM #3
Re: Swiss K31 Reloading
If by chance you can't find 7.5 brass you can also use 284 win and neck it up to 30 cal in the sizer die , although it's probably harder to get . When I had mine a few yrs back I mainly used cast bullets and did rather well . Basiclly most powders that work well in the 30-06 will do well in the Swiss they have virtually the same case capacity in fact my older hogdon manual lists them together and says there interchangeable . But I always backed the Swiss loads off a bit .
Last edited by Tim Ault; August 21st, 2017 at 09:00 AM.
-
August 21st, 2017, 09:19 AM #4
Re: Swiss K31 Reloading
You can always buy the PPU 7.5x55 ammo and reuse the cases : https://www.sportsmansguide.com/prod...unds?a=1584495
Or buy some Berdan primers (if you can find them) and reuse the Swiss surplus cases.
Or convert the Berdan's to Boxer:
https://www.youtube.com/watch?v=AkKJfvMyuDg
http://www.castboolits.gunloads.com/...ckets-to-BoxerToujours prêt
Similar Threads
-
reloading swiss -31 ?
By Shrubdog in forum GeneralReplies: 3Last Post: November 14th, 2008, 08:29 AM -
Anyone reloading 7.5x55 Swiss?
By W123driver in forum GeneralReplies: 4Last Post: September 21st, 2008, 05:32 PM
Bookmarks