Results 41 to 50 of 92
Thread: 9mm build questions
-
June 19th, 2017, 02:01 PM #41Banned
- Join Date
- Jun 2017
- Location
-
Phoenix,
Arizona
- Posts
- 250
- Rep Power
- 0
Re: 9mm build questions
R u going to go electric or steel sights
-
June 19th, 2017, 02:06 PM #42Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: 9mm build questions
you mean adding like a red dot or just using iron sights?
I have a pair of magpul mbus sights for it right now. will go with a red dot at some point. just don't know which right now. I'm thinking something compact, sort of like the Burris Fastfire III -
https://www.midwayusa.com/product/15...ny-mount-matte
-
June 19th, 2017, 02:29 PM #43Banned
- Join Date
- Jun 2017
- Location
-
Phoenix,
Arizona
- Posts
- 250
- Rep Power
- 0
Re: 9mm build questions
Cool. I have eotech, aimpoint, and Cmore sights. If u like scopes aimpoint is ok. Heads up display eotech is ok. I like the Cmore rail sight a little better because of the thickness of the window frame of the red dot glass. Now Cmore makes different stuff. The only problem with these sights are the price tags that follow. For the fun of it I bought some Chinese 100.00 sights and I had a bad experience. Some times it would change colors on its own, and the ruggedness of it was junk. Just my experiences here
-
June 19th, 2017, 05:25 PM #44Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: 9mm build questions
I have an Aimpoint PRO on my 5.56 AR15 rifle.
-
June 20th, 2017, 11:31 AM #45Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: 9mm build questions
I like the look of round handguards, like this one - http://www.joeboboutfitters.com/Midw...ilblack-g3.htm
But I'd rather have m-lok sections instead of adding picatinny rails. Can you buy rail sections that are m-lok instead of picatinny?
Does anyone know of a round 9" handguard with m-lok slots? ALG has one that I like but the shortest they have is 10" and that's going to be too long for what I want.
I also want to keep the cost down, so like around $150 or less.
If I can't find a round one, my next choice is this one - https://www.joeboboutfitters.com/Mid...m?1=1&CartID=1Last edited by WWGunslinger; June 20th, 2017 at 11:42 AM.
-
June 20th, 2017, 03:22 PM #46
Re: 9mm build questions
Like this one?
https://aeroprecisionusa.com/ar15-qu...andguards.html
In stock here. Going to need the barrel nut as well (+$12)
http://www.graniteridgeoutfitters.co...APPG400002.htmHGW, llc ~ Title 1 & NFA sales/manufacturing ~ Transfers - Title 1 $20 - NFA $50
-
June 20th, 2017, 03:35 PM #47Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: 9mm build questions
-
June 20th, 2017, 03:47 PM #48Banned
- Join Date
- Jun 2017
- Location
-
Phoenix,
Arizona
- Posts
- 250
- Rep Power
- 0
Re: 9mm build questions
www.youngmanufacturing.net has some light weight hand guards u might light
-
June 20th, 2017, 05:06 PM #49Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: 9mm build questions
regarding the kak flash can, the KAK site says to torque down to the barrel, don't use a crush washer. Only use the crush washer if you need to adjust timing.
the flash can has 2 small slots opposite each other on the outside of the can. When screwed all the way down, they are at the 10 and 4 o clock position. I want them to be even on the sides, like 3 and 9 o clock position.
The barrel thread is 1/2x36, so do I need to find shims or crush washers that are 1/2x36 or will any 1/2" shim or crush washer work?
Is it the just trial and error until you get the timing where you want it?
it really seems like I would just need a very thin shim.
-
June 20th, 2017, 08:49 PM #50
Re: 9mm build questions
Granite Ridge is a good vendor. Fast too.
Look at my pistol thread. Tons of pics of the Aero handguard.
Its nice, but it's bigger around than ALG.I called to check my ZIP CODE!....DY-NO-MITE!!!
Similar Threads
-
First build - many questions
By Sgt.K in forum GeneralReplies: 18Last Post: April 3rd, 2016, 10:12 PM -
AK and AR build questions.
By Automan21k in forum GunsmithingReplies: 11Last Post: April 10th, 2013, 12:13 PM -
SBR build questions
By 1911carry in forum NFA/Class 3/Title IIReplies: 2Last Post: January 10th, 2012, 05:40 PM -
ar build questions
By jd21 in forum GeneralReplies: 4Last Post: November 27th, 2009, 06:21 PM -
AK build questions...
By Snert in forum GeneralReplies: 7Last Post: January 21st, 2009, 10:28 PM
Bookmarks