Results 11 to 15 of 15
Thread: 45acp inside 500 Magnum
-
May 14th, 2017, 10:45 AM #11
-
May 16th, 2017, 12:11 AM #12Member
- Join Date
- May 2016
- Location
-
Fenton,
Missouri
- Posts
- 87
- Rep Power
- 214756
Re: 45acp inside 500 Magnum
I used the inertia bullet puller tonight to extract the 45 ACP cases out of the 500 Magnum cases. I had to run 43 500 Mag cases through the puller.
The cases hadn't been sized or decapped.
I was frustrated by two things. The first I could do nothing about. A 500 Mag case that's been fired is a really tight fit into a bullet puller. The second was the puller collar, which is held together by a small O ring, kept falling apart when I tried to remove it from one case and put it on the next case. I discovered a little hand trick that may really help out if you find yourself running a bunch of cases through a similar puller with the little 3 piece collar that engages the rim at the case head, allowing you to whack the concrete floor with the head of the puller thereby pulling the bullet. After the whacking, I discovered if I firmly hold the next case head up against the mouth of the just emptied case, I could use my thumb and index finger to push the collar from one case to the next. The case diameter helped retain the collar shape and it didn't fall apart again. I don't recommend bullet pulling as a relaxing past time but this technique really helped me get through it. Keep it in mind if you ever find yourself in the position of having to run a bunch of cases through an inertial bullet puller.
-
May 16th, 2017, 06:31 AM #13
Re: 45acp inside 500 Magnum
With those pullers many bypass that collar and use a shell holder.
LOL I've used mine so much the O rings have given up.It ain't what they call you, it's what you answer to.
-
May 16th, 2017, 10:54 AM #14Member
- Join Date
- May 2016
- Location
-
Fenton,
Missouri
- Posts
- 87
- Rep Power
- 214756
Re: 45acp inside 500 Magnum
I haven't got any single shell holders, only the shell plates for my RL550B, but if I'd have had one, I'd have used it. I was ready to toss the cases in the trash after about the 10th time putting that little O ring collar back together, and I can tell you at the time, there was NO LOL going on, fortunately I was home alone and what I said will remain between me and the walls of the basement. I thought I'd made such a discovery, I'd make a video and put it on youtube. I did make a demonstration video, but it was so goofy I deleted it. It was an old guy with a gray beard first of all, and he couldn't remember what he wanted to say, and his hands kept shaking.
-
May 16th, 2017, 06:42 PM #15
Similar Threads
-
Magnum Pistol Primers-.45ACP
By ettorment1916 in forum Ammunition & ReloadingReplies: 8Last Post: March 31st, 2013, 10:22 PM
Bookmarks