Results 1 to 5 of 5
-
March 28th, 2017, 12:21 AM #1Junior Member
- Join Date
- Aug 2016
- Location
-
nepa,
Pennsylvania
(Wayne County) - Posts
- 12
- Rep Power
- 0
Experienced AK Gunsmith in NEPA? Lackwanna/Luzerne/Wayne/or Pike County
I have an AK that needs threads on the barrel. I need someone that knows what they're doing.
Any suggestions?
-
March 28th, 2017, 06:57 AM #2Super Member
- Join Date
- Aug 2011
- Location
-
Ford City, PA,
Pennsylvania
(Armstrong County) - Posts
- 773
- Rep Power
- 16927248
Re: Experienced AK Gunsmith in NEPA? Lackwanna/Luzerne/Wayne/or Pike County
Do it yourself. As long as you don't have the intention of putting a silencer on the end of it, you can get a threading kit for less than what a gunsmith will charge you.
-
March 28th, 2017, 08:14 AM #3Hokkmike Guest
Re: Experienced AK Gunsmith in NEPA? Lackwanna/Luzerne/Wayne/or Pike County
The gunsmith at Gander Mt. at the Lycoming County Mall has done two jobs for me - both with good results. It is in Lycoming County but only an hour + south of you.
-
March 28th, 2017, 03:14 PM #4Junior Member
- Join Date
- Aug 2016
- Location
-
nepa,
Pennsylvania
(Wayne County) - Posts
- 12
- Rep Power
- 0
Re: Experienced AK Gunsmith in NEPA? Lackwanna/Luzerne/Wayne/or Pike County
The problem for me is my threads are kind of fucked. My barrel was part of the preban and had threads ground down, so my barrel thickness is .503 which I can thread 1/2-28 .. but the walls on the barrel are not even. So I need a pretty slick solution. I'm thinking 1/2-28 thread then using a 5/8-24 adapter on top of it, and tacking that on or something.
-
March 28th, 2017, 03:29 PM #5Super Member
- Join Date
- Aug 2011
- Location
-
Ford City, PA,
Pennsylvania
(Armstrong County) - Posts
- 773
- Rep Power
- 16927248
Re: Experienced AK Gunsmith in NEPA? Lackwanna/Luzerne/Wayne/or Pike County
how long is the barrel?
Similar Threads
-
O/Ced Monroe County and Wayne & Pike !
By MARINE DIVISION TWO in forum Open CarryReplies: 11Last Post: September 10th, 2014, 07:57 PM -
SKS gunsmith in Luzerne County?
By Zeeba in forum LuzerneReplies: 3Last Post: August 8th, 2013, 04:54 PM -
Gunsmith /Luzerne County
By flipper in forum GunsmithsReplies: 4Last Post: May 18th, 2011, 12:05 AM -
Bucks county- Gunsmith or experienced member- 1911
By lightsdarkness in forum GunsmithingReplies: 9Last Post: August 24th, 2010, 04:12 PM -
WTB: Cheap pump 12 gauge in NEPA [Pike County]
By RarestRX in forum GeneralReplies: 1Last Post: February 27th, 2008, 05:04 PM
Bookmarks