Results 1 to 10 of 17
Hybrid View
-
March 12th, 2017, 03:59 PM #1
Help me find some USGI equipment parts......
I've Googled and shopped at craft stores and scoured eBay, and I'm drawing a blank. I need to tap the PAFOA brain trust.
There are these snap fasteners on lots of USGI equipment (gun related equipment), like the 3-mag carriers, the field jackets, the ALICE packs. Usually found on the end of a strap, except for the field jackets.
As near as I can tell, these are designated "size 22", based on the largest cap diameter of about 14.1mm. The female side is about 9.85mm.
I'd like to buy a gross of the things, since it's a PITA to find even one, and a gross should take me to the end of my days.
Anyone have a dealer to get this monkey off my back?
Here's the strap on LCE gear
US_Army-_LC-1_Field_Pack_-_medium.jpg
They look like these:
snap fasteners.jpgAttorney Phil Kline, AKA gunlawyer001@gmail.com
Ce sac n'est pas un jouet.
-
March 12th, 2017, 04:04 PM #2
Re: Help me find some USGI equipment parts......
Fabric snaps like this ..
https://www.mcmaster.com/#fabric-sna...eners/=16q55ss
Mc Master Carr 100ct pack. If they are the right size ?
Was thinking that 14mm is the same as 9/16 as they are advertised.Last edited by DucatiRon; March 12th, 2017 at 04:14 PM.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
March 12th, 2017, 05:32 PM #3
Re: Help me find some USGI equipment parts......
My micrometer skills are not precise, but I measured the outside as .557", which is close to .5625" (9/16"). It's possible.
It just seems like the military kind of standardized on one size, so there must literally be 100 million of them floating around, and there ought to be a special nomenclature, some "mil-spec" size snap.Attorney Phil Kline, AKA gunlawyer001@gmail.com
Ce sac n'est pas un jouet.
-
March 12th, 2017, 05:50 PM #4
Re: Help me find some USGI equipment parts......
Did a quick look at a couple surplus shops. Perhaps something like this: http://www.ahh.biz/hardware/military/snaps/
It ain't what they call you, it's what you answer to.
-
March 12th, 2017, 06:12 PM #5Grand Member
- Join Date
- Mar 2011
- Location
-
age: 61 Dillsburg,
Pennsylvania
(York County) - Posts
- 1,099
- Rep Power
- 3329858
Re: Help me find some USGI equipment parts......
Going from memory here, knifekits.com? Also, Tandy leather stores may have some. Are they "pull the dot" snaps, only release pulled in one direction? Search on kydex and holster/leather craft. They shouldn't be too hard to find.
-
March 12th, 2017, 06:21 PM #6
Re: Help me find some USGI equipment parts......
Take yer pick. http://www.ebay.com/itm/10-12-5-15-1...NQyP8-c8tBflWg
I don't speak English , I talk American!
-
March 12th, 2017, 08:17 PM #7
Re: Help me find some USGI equipment parts......
Knifekits.com has what they "line 20" & "line 24" (both have a 3/16" post), no "22", and $0.40-$0.50 a piece... but here's the link just in case.
http://www.knifekits.com/vcom/index.php?cPath=41_56_483
Similar Threads
-
Help a new gun owner find safer equipment
By Scooter12 in forum Concealed & Open CarryReplies: 7Last Post: February 20th, 2013, 03:38 AM
Bookmarks