Results 31 to 40 of 41
Thread: CZ P10c whos getting one?
-
August 1st, 2017, 06:37 PM #31Member
- Join Date
- Feb 2017
- Location
-
Solanco,
Pennsylvania
(Lancaster County) - Posts
- 42
- Rep Power
- 0
Re: CZ P10c whos getting one?
Have over a thousand rounds through mine since I picked it up about a month ago. Most of that came within the first week or two I had it. Sights were not set well from the factory, mag release and slide stop took a little breaking in. Zero malfunctions and gun shoots great. Already planning to pick up a threaded barrel model once they get out there and probably get my FDE set up for a red dot. It's good enough I haven't picked up my P01 since and will probably move on from that gun, but still keeping my 75.
-
August 6th, 2017, 02:30 PM #32
Re: CZ P10c whos getting one?
I have a range trip scheduled next week with a friend who recently bought one. I will be trying it out and will give a report on it. Will also be doing an update on another friends Taurus G2. The trip was scheduled for last friday but something came up. I am not a striker fired guy but I try to give honest opinions on anything I get my hands on.
Some people just plain suck.
If you're gonna be dumb ya gotta be tough.
-
August 15th, 2017, 02:24 PM #33
Re: CZ P10c whos getting one?
I put getting one on the back burner. I found a deal on a 75d compact, which supplanted the p10c on layaway for the moment. I guess breaking away from metal hammer fired guns is harder to do than I thought.
-
September 22nd, 2017, 04:29 PM #34Grand Member
- Join Date
- Aug 2011
- Location
-
Moscow,
Pennsylvania
(Lackawanna County) - Posts
- 4,029
- Rep Power
- 21474853
Re: CZ P10c whos getting one?
So I got one. Good gun. Feels great in the hand, grippy texture ambi mag release. Sliding a mag home on a locked back gun forwards the slide. I put about forty rounds through mine. Mine is high about 6 inches at 25 yards with my 147 reloads. Appears to have a tight chamber too. And the trigger is a bit spongy then breaks crisply with a short result. Very good for the money
-
September 22nd, 2017, 04:32 PM #35Grand Member
- Join Date
- Aug 2011
- Location
-
Moscow,
Pennsylvania
(Lackawanna County) - Posts
- 4,029
- Rep Power
- 21474853
Re: CZ P10c whos getting one?
Oh I'll add this. I think the canik sf elite is better out of the box.
Cz is grippier but the canik is better overall imo
-
October 11th, 2017, 12:03 PM #36
Re: CZ P10c whos getting one?
I don't own any CZ firearms (my loss), so this isn't anything personal, it just came across my newsfeed today and I thought I'd share for the sake of conversation.
"It seems that the Constitution is more or less guidelines than actual rules"
My feedback: http://forum.pafoa.org/showthread.php?t=305685
-
October 11th, 2017, 01:23 PM #37Grand Member
- Join Date
- Dec 2010
- Location
-
Easton,
Pennsylvania
(Northampton County) - Posts
- 1,378
- Rep Power
- 21474851
Re: CZ P10c whos getting one?
I am a CZ guy and I have not yet jumped on this pistol either, so far there have been a series of small issues such as hard mag releases, roll pins working out of the frame, and of course hard to release slide stops. This video shows a new problem ,one that I have seen before. I am waiting till they release a semi compact version of this pistol. By then hopefully Cz will have all the bugs worked. For now I bought a Grand Power Q100 striker fired pistol about 4.25 inches again a little bigger than I wanted.
www.EastonFirearmsRefinishing.com Owner/Operator, NRA Pistol Instructor
-
October 11th, 2017, 06:43 PM #38
Re: CZ P10c whos getting one?
I was just going to start a thread with this video. I am a HUGE CZ fan owning many spanning different eras and I have been going back and forth between the Gen 5 19, S&W M&P 2.0 compact and The P-10 C. This has me putting this purchase off until it's addressed by CZ in one way or another.
Funny how all them big channels never have a single malfunction ever.
Join the GOA & save $5.00. https://www.gunowners.org/mac-subs-join-goa.htm
-
October 11th, 2017, 07:10 PM #39Grand Member
- Join Date
- Aug 2011
- Location
-
Moscow,
Pennsylvania
(Lackawanna County) - Posts
- 4,029
- Rep Power
- 21474853
Re: CZ P10c whos getting one?
If anyone is ever in my area and wants to shoot it please let me know
-
June 1st, 2018, 02:45 PM #40Junior Member
- Join Date
- Jun 2018
- Location
-
West Chester,
Pennsylvania
(Chester County) - Posts
- 1
- Rep Power
- 0
A Grand Power collector? Really!
Brian, you are the first person in Southeastern Pennsylvania I've seen that owns a grand power X-calibur. My wife and I are thinking of buying one, but would love to shoot one first. Any way we might get together? We're in West Chester.
Similar Threads
-
Yugo AKs, whos got one?
By Optikalillushun in forum RiflesReplies: 17Last Post: December 8th, 2013, 08:44 AM -
Whos all from ELK
By Bug44 in forum GeneralReplies: 17Last Post: July 28th, 2009, 01:29 PM
Bookmarks