Results 1 to 4 of 4
-
February 28th, 2017, 09:32 AM #1Junior Member
- Join Date
- Feb 2017
- Location
-
CARNEGIE,
Pennsylvania
- Posts
- 2
- Rep Power
- 0
thompson center flintlock Pa hunter
can anyone tell me how to remove the rear sight
-
February 28th, 2017, 04:08 PM #2Super Member
- Join Date
- Aug 2006
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 898
- Rep Power
- 1265929
Re: thompson center flintlock Pa hunter
Back the elevation screw out until it comes free being careful to capture the spring that lives under the sight. Once the screw is removed the blade flips up. There are 2 screws under there that you remove to take the base off. Depending upon the vintage of the sight you might have to drift the roll pin out the holds the blade assy. to the base to expose the screws.
The Lord Bless You
-
March 1st, 2017, 10:41 AM #3Junior Member
- Join Date
- Feb 2017
- Location
-
CARNEGIE,
Pennsylvania
- Posts
- 2
- Rep Power
- 0
Re: thompson center flintlock Pa hunter
thanks I figured it out right after asking it was just as you said i did need to remove the roll pin
-
March 1st, 2017, 02:29 PM #4Super Member
- Join Date
- Aug 2006
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 898
- Rep Power
- 1265929
Re: thompson center flintlock Pa hunter
Glad to know I was right!
The Lord Bless You
Similar Threads
-
Thompson Center Flintlock ID and Age
By DeadHead in forum RiflesReplies: 5Last Post: June 6th, 2013, 08:27 PM
Bookmarks