Pennsylvania Firearm Owners Association
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Join Date
    Jun 2010
    Location
    Eastern PA, Pennsylvania
    (Delaware County)
    Posts
    1,353
    Rep Power
    21474851

    Default Gauging interest in 9mm AR pistol/SBR/rifle GB

    Hey.....

    I am looking at putting together a group buy for an AR 9mm pistol/SBR/rifle group buy. The company I am looking to run the buy with is a PA based company with a great design. Nothing is definite, but its looking pretty good.

    Costs have not been firmed up yet. There are a couple things that will impact the success of the buy....the total units required to make it a go and the delivery time frame.

    I am looking at going to 50 units and hope to have everything delivered within a three month window from the time the buy is closed and commitments have been made. Deposits will be required in the $200.00 range.


    Now that we don't have a crook looking to take away our God given Rights....think the time frame should be a non issue.

    Looking to gauge interest and what your preference would be as far as Pistol/SBR/Rifle....these units are made to accept the G18 mags as well as the G17 mags (Glock).

    I will be cross listing this buy across a few forums...if the interest is greater than expected, we might do staged buys so as not to overwhelm the manufacturer.

    Your input would be appreciated...

  2. #2
    Join Date
    Oct 2009
    Location
    Ambridge, Pennsylvania
    (Beaver County)
    Posts
    2,380
    Rep Power
    21474853

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    I'd like to get in on this but already have a converted mag block lower.

    I'm looking right now for a 6" or 7" upper for a SBR project. If one of those uppers or complete Glock setups becomes available I'd be in on it of course pending on price.
    Last edited by DucatiRon; November 15th, 2016 at 09:33 PM.
    www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.

  3. #3
    Join Date
    Jun 2010
    Location
    Eastern PA, Pennsylvania
    (Delaware County)
    Posts
    1,353
    Rep Power
    21474851

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    Quote Originally Posted by DucatiRon View Post
    I'd like to get in on this but already have a converted mag block lower.

    I'm looking right now for a 6" or 7" upper for a SBR project. If one of those uppers or complete Glock setups becomes available I'd be in on it of course pending on price.
    One of the ideas is to possibly sell complete uppers and then sell the lowers and parts separately. Still in talks....like the idea though.

  4. #4
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,535
    Rep Power
    21474887

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    As someone who recently built a 9mm carbine, I sort of wish I had done it as a pistol.

    Oh who the fuck am I kidding, I'll end up with both eventually.

    Complete guns are not in the equation for me though - I need to build them a little at a time to afford them.
    I would imagine I'm not alone in this situation, so maybe the upper/lower thing would work for a lot of people?
    I called to check my ZIP CODE!....DY-NO-MITE!!!

  5. #5
    Join Date
    Aug 2013
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Age
    66
    Posts
    3,139
    Rep Power
    21474850

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    want to follow this... maybe for a lower

  6. #6
    Join Date
    Jun 2010
    Location
    Eastern PA, Pennsylvania
    (Delaware County)
    Posts
    1,353
    Rep Power
    21474851

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    Quote Originally Posted by JDA58 View Post
    want to follow this... maybe for a lower
    Getting the impression a parts buy might be a beter idea. Sell uppers, Lower receiver, barrel options with rail configurations.

    I will see what can be arranged.

  7. #7
    Join Date
    Apr 2010
    Location
    N/A, Pennsylvania
    Age
    40
    Posts
    1,435
    Rep Power
    5048074

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    I think you truly need to show us a few things here.

    1. What they look like.

    2. Price range.

    A $200 deposit is fairly steep. I am going out on a limb here and betting the total price for a pistol or SBR would be well north of $550.

  8. #8
    Join Date
    Jun 2010
    Location
    Eastern PA, Pennsylvania
    (Delaware County)
    Posts
    1,353
    Rep Power
    21474851

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    Quote Originally Posted by PA1936MN View Post
    I think you truly need to show us a few things here.

    1. What they look like.

    2. Price range.

    A $200 deposit is fairly steep. I am going out on a limb here and betting the total price for a pistol or SBR would be well north of $550.

    As I mentioned in my first post, this is still a work in progress. Not sure we are doing a complete unit...parts are parts. I will display all the images you want once I have a feel for what we will put forward.

    Price for a completed unit(pistol) will be around $700.00....but we are not sure that is the direction we are going in.

    The deposit will be adjusted accordingly....On any firearm GB I require a deposit....its your skin in the game. Otherwise, I get a lot of commitments with several drop outs at the end.

  9. #9
    Join Date
    Jan 2015
    Location
    phxv
    Posts
    297
    Rep Power
    0

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    last round bolt hold open?

  10. #10
    Join Date
    Sep 2008
    Location
    mohnton, Pennsylvania
    (Berks County)
    Posts
    29
    Rep Power
    0

    Default Re: Gauging interest in 9mm AR pistol/SBR/rifle GB

    I might be interested in a complete pistol. Maybe just an upper if people go that route. Can you share the company?

Page 1 of 3 123 LastLast

Similar Threads

  1. Gauging interest in a D.A.R.K. Tactical Aid Course
    By xx AG xx in forum Training, Tactics & Competition
    Replies: 42
    Last Post: September 24th, 2013, 12:44 AM
  2. Replies: 4
    Last Post: June 17th, 2009, 03:19 PM
  3. Gauging the interest.
    By JDePietro in forum General
    Replies: 34
    Last Post: July 14th, 2008, 11:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •