Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Join Date
    Apr 2007
    Location
    Glade Mill Lake, Cooperstown, Pennsylvania
    (Butler County)
    Posts
    3,832
    Rep Power
    21885

    Default What do you think of my new rear sight?

    Or lack thereof.

    The rear sight that came with my gun was total crap. It was plastic, and it was never really secure. Not only that it was really hard to line up with the front sight.

    Well today I got fed up and took the damn thing off. The angle of my slide is such that it lines up perfectly with the front post and without the rear sights in the way I can get that dot on target super fast. If I take my time and aim slowly the accuracy is the same, but with increased speed when it counts. I taped off a neat square on the rear of the slide and painted it gold. It allows me to get on target fast, and I can center the front sight in the square for precise shooting. It is just as accurate as the rear sight was.




    What do you guys think? It works for me. Keep in mind this gun was never a tack driver. It always goes bang and works from "here to there" so it's main purpose is a short range fighting gun. For that this new sighting system seems to shine. I may make the square a little thinner, but it seems to work good so far.

  2. #2
    Join Date
    Oct 2006
    Location
    New Castle, Pennsylvania
    (Lawrence County)
    Posts
    8,392
    Rep Power
    4021338

    Default Re: What do you think of my new rear sight?

    I think you should get a new rear sight. While I use a slide focus/index on very close targets and a front sight index/focus on mid-range targets.....everything past 7 yards gets boxed.

    There are some nice low profile offerings out there. But....in the meantime...I'd play around with it. Anything new always teaches you something. It may even help you see the front sight during the slide cycle easier. You may even try different shapes on the rear. Let us know how it works out.



    Lycantryinstuffthrope

    I taught Chuck Norris to bump-fire.

  3. #3
    Join Date
    Apr 2007
    Location
    Chester County, Pennsylvania
    (Chester County)
    Posts
    5,117
    Rep Power
    30805

    Default Re: What do you think of my new rear sight?



    I shot that group at 7 yards with the SIG 239 9mm in the picture...no rear sight on the gun. Yes you can hit with it...but it's not any easier, that's for sure.

    It can work...I think you'd be better off having something on there though...even something like the XS rear sight would be better than nothing. I'd just get a set of sights with a WIDE rear notch.

    I shot my Warren Tactical sights in match tonight (wide notch, narrow post) and tore some shit up with them. They definitely get the nod.

  4. #4
    Join Date
    Apr 2007
    Location
    Glade Mill Lake, Cooperstown, Pennsylvania
    (Butler County)
    Posts
    3,832
    Rep Power
    21885

    Default Re: What do you think of my new rear sight?

    I'm working on getting a whole new gun. Until then I may play around with the old rear sight. My little square seems to be nice for close ranges and low light. If the gun were more accurate I'd feel like I cheated myself, but as it is it hasn't seemed to hurt anything.

    Looking for an XD. Until then I'll keep playing around with this thing.

  5. #5
    Join Date
    Apr 2007
    Location
    Glade Mill Lake, Cooperstown, Pennsylvania
    (Butler County)
    Posts
    3,832
    Rep Power
    21885

    Default Re: What do you think of my new rear sight?

    I tweaked it a little. Instead of a gold box I now have a thin vertical white stripe of reflective tape. it looks about twice as big as it is in the crappy picture because it's reflective, but I really like it. Just put the dot on the I.


  6. #6
    Join Date
    Apr 2007
    Location
    Orange (Formerly York, PA), Virginia
    Age
    60
    Posts
    865
    Rep Power
    4597

    Default Re: What do you think of my new rear sight?

    I'm Not Crazy about it, But hey if it works for you, then that's all that really matters.
    Recoil Happens

  7. #7
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    33,571
    Rep Power
    21474887

    Default Re: What do you think of my new rear sight?

    If you ever wanna put optics on that, I have some spare stuff lying around that I'm not using any more...
















    Oh, and if you wanna make it a red dot...




    I have some ideas for tac lights as well.

  8. #8
    Join Date
    Jul 2007
    Location
    Boalsburg, Pennsylvania
    (Centre County)
    Posts
    4,510
    Rep Power
    3044261

    Default Re: What do you think of my new rear sight?

    Nice! Teh magnifing glass!
    Audemus jura nostra defendere

  9. #9
    Join Date
    May 2008
    Location
    Philadelphia, Pennsylvania
    (Philadelphia County)
    Age
    46
    Posts
    1,047
    Rep Power
    174

    Default Re: What do you think of my new rear sight?

    Quote Originally Posted by P-11 shooter View Post
    I'm working on getting a whole new gun. Until then I may play around with the old rear sight. My little square seems to be nice for close ranges and low light. If the gun were more accurate I'd feel like I cheated myself, but as it is it hasn't seemed to hurt anything.

    Looking for an XD. Until then I'll keep playing around with this thing.
    Dude! Get an M&P, and get it over with.......It will put a smile on your face every time you touch it.
    ZRT -SECTOR-7
    "If you do not stand behind our troops, feel free to stand in front of them" - Unknown
    "Incoming fire has the right of way" - Murphy's Military Laws
    "Fast is fine, accuracy is final" - Larry Vickers

  10. #10
    Join Date
    Apr 2007
    Location
    Chester County, Pennsylvania
    (Chester County)
    Posts
    5,117
    Rep Power
    30805

    Default Re: What do you think of my new rear sight?

    Quote Originally Posted by RONNIE77 View Post
    ....It will put a smile on your face every time you touch it.
    You still talking about firearms?

Page 1 of 2 12 LastLast

Similar Threads

  1. keltec p11 rear sight is loose - how to fix?
    By Punisher in forum General
    Replies: 6
    Last Post: October 21st, 2012, 10:42 PM
  2. Help - Can I change this 1911 rear sight?
    By BerksCountyDave in forum General
    Replies: 2
    Last Post: May 14th, 2008, 10:48 PM
  3. Can I change the rear sight on this 1911?
    By BerksCountyDave in forum General
    Replies: 3
    Last Post: May 13th, 2008, 01:34 AM
  4. AR15 A3 Backup rear sight
    By luckyned7 in forum General
    Replies: 9
    Last Post: April 19th, 2007, 11:29 AM
  5. WTS: Mini 14 Rear Sight Tool
    By Lambo in forum General
    Replies: 1
    Last Post: March 5th, 2007, 12:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •