Results 1 to 3 of 3
-
July 29th, 2016, 08:23 AM #1Grand Member
- Join Date
- Sep 2008
- Location
-
Radnor,
Pennsylvania
(Delaware County) - Posts
- 1,005
- Rep Power
- 4647748
Kel Tec P32 cleaning and lubing suggestions
I have been cleaning my P32 with Gunzilla wipes followed by patches with Hoppes through the barrel and over some of the other surfaces. I then lubricate with BreakFree CLP. I've noticed that I start to get FTEs on occasion after firing about 75 rounds. I'm assuming that this is a lube issue. Any recommendations based on experience with P32s?
Know your audience. Don't try to sell a Prius at a Monster Truck Rally.
-
July 29th, 2016, 08:27 AM #2
Re: Kel Tec P32 cleaning and lubing suggestions
I have a P3AT which is the same setup as yours.
It sounds like you might be running it wet.
When it jams, is there a lot of dirt build up? Like soot and powder residue?
I run mine pretty dry, it is lubed with Frog Lube. No issues.
-
July 30th, 2016, 09:12 PM #3
Re: Kel Tec P32 cleaning and lubing suggestions
I only use frog lube on 100% of mine rarely get any failures stemming from lubrication so Remington788 is steering you in the right directions sounds like over lubrication.
Last edited by chrmm22sr; July 30th, 2016 at 09:13 PM. Reason: typo
Have you called, faxed, or emailed your reps today!!!
Similar Threads
-
Suggestions for cleaning stainless revolver?
By Misery Loves Shotguns in forum PistolsReplies: 16Last Post: November 17th, 2015, 11:04 AM -
Let the lubing begin...
By NatesGT in forum Gun PicturesReplies: 2Last Post: April 9th, 2014, 10:03 PM -
Cleaning/lubing a polymer pistol
By jaseman in forum PistolsReplies: 26Last Post: February 18th, 2013, 03:42 PM -
Cleaning and Lubing semi-auto handguns
By rikilii in forum GeneralReplies: 20Last Post: November 25th, 2009, 09:58 AM -
Saiga 12 cleaning/lubing
By FNG19 in forum GeneralReplies: 14Last Post: March 7th, 2009, 04:34 PM
Bookmarks