Kel Tec P32 cleaning and lubing suggestions

**dannyb** · July 29th, 2016, 08:23 AM

I have been cleaning my P32 with Gunzilla wipes followed by patches with Hoppes through the barrel and over some of the other surfaces. I then lubricate with BreakFree CLP. I've noticed that I start to get FTEs on occasion after firing about 75 rounds. I'm assuming that this is a lube issue. Any recommendations based on experience with P32s?

**Remington788** · July 29th, 2016, 08:27 AM

I have a P3AT which is the same setup as yours.
It sounds like you might be running it wet.
When it jams, is there a lot of dirt build up? Like soot and powder residue?
I run mine pretty dry, it is lubed with Frog Lube. No issues.

**chrmm22sr** · July 30th, 2016, 09:12 PM

I only use frog lube on 100% of mine rarely get any failures stemming from lubrication so Remington788 is steering you in the right directions sounds like over lubrication.