Results 1 to 10 of 13
Hybrid View
-
August 15th, 2008, 03:53 AM #1Junior Member
- Join Date
- Jan 2008
- Location
-
SLC,
Utah
- Posts
- 27
- Rep Power
- 0
AIMSurplus Ishapore Enfield 2A .308
If any of you are on the fence about ordering one of the Ishapore Enfield .308 rifles from AIM-surplus, my advice is save your money. I ordered one two weeks ago and bought a synthetic stock for it while waiting for it to arrive in the mail. What the ad described was a rifle that would be "Bright, Clean", presumably a shooter. What I got in the mail was a rifle with a feed ramp so chewed up it will not feed a single round from the magazine. The feed ramp has a giant divot worn into it from use, and features a couple of nice horizontal gouges that are each perfectly capable of jamming a round, so unless I want to load one round in to the chamber each shot, I have purchased a $180 club.
If you navigate a few threads down you will see Willtallica's thread about his Ishapore, also from AIM-surplus. It seems his gunsmith pronounced his rifle unfirable as well, in his case because the headspace was excessively loose. I understand that half the fun of these weapons is cleaning away the grease and cheap finish and years of neglect, but if you're like me you want to be investing the time restoring a shooter not a doorstop.
Did any others out there order one of these .308 Enfields from Aim-surplus? If so, did you get a wallhanger like myself, or a rifle in usable condition? It seems that if this company is selling inoperable Enfields then they should mention it in the online ad.
This picture does not really show how deep the gouges are in the feed ramp, but even with the matching serial magazine (which has good feed lips), the rifle jams when loading from the mag.
Last edited by ArsenalOwner; August 15th, 2008 at 04:26 AM. Reason: idiotic typo
-
August 15th, 2008, 03:58 AM #2
Re: AIMSurplus Ishapore Enfield 2A .308
Did you contact Aim about the problem? They have a good reputation for service, perhaps you could give it a try.
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
-
August 15th, 2008, 04:03 AM #3Junior Member
- Join Date
- Jan 2008
- Location
-
SLC,
Utah
- Posts
- 27
- Rep Power
- 0
Re: AIMSurplus Ishapore Enfield 2A .308
Yes I messaged their customer service, and am awaiting their response. I will keep this thread updated when I hear back, as you said this company has a good reputation and it is not my intention to damage it. I only want to inform people what to expect if they are considering ordering this particular surplus item.
-
August 15th, 2008, 05:54 AM #4Junior Member
- Join Date
- Jan 2008
- Location
-
SLC,
Utah
- Posts
- 27
- Rep Power
- 0
Re: AIMSurplus Ishapore Enfield 2A .308
Another issue with the feeding is that the magazine holds the rounds seated so far back in the receiver that the bolt does not go back far enough to load the next round. Maybe this is a problem with the magazine lips that could be fixed with some pliers? I attached a pic in hopes that one of you Enfield experts could tell me which way I need to bend the feed lips to get this thing closer to running? Help!!
-
August 15th, 2008, 08:18 AM #5Junior Member
- Join Date
- Jan 2008
- Location
-
SLC,
Utah
- Posts
- 27
- Rep Power
- 0
Re: AIMSurplus Ishapore Enfield 2A .308
Me again, one reason the bolt does not go back far enough to feed the next round is that the retaining spring is loose and flapping back and forth, sometimes blocking the bolt from coming back the last few millimeters. I am guessing this is not normal?
-
August 15th, 2008, 08:29 AM #6
Re: AIMSurplus Ishapore Enfield 2A .308
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Do not alter the magazine - yet!
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
I can tell just from this picture that the problem is being caused not by the magazine, but by restricted bolt travel. If the bolt in this photo is as far back as it'll go, something's blocking it. If you'll notice, the stripper clip groove isn't clear, so obviously the bolt needs to go back more.
That said, I wouldn't be surprised to hear you can't get the bolt out, either.
Find the root cause of this, and it'll probably run okay. My old 2A was in worse shape than yours, and it shot very well. It also had two grooves in the feed ramp, although they looked like they were intentionally machined there. I polished it, along with the bolt face and it fed ammo as smooth as glass.Gloria: "65 percent of the people murdered in the last 10 years were killed by hand guns"
Archie Bunker: "would it make you feel better, little girl, if they was pushed outta windows?"
http://www.moviewavs.com/TV_Shows/Al...he_Family.html
-
August 15th, 2008, 08:40 AM #7
Re: AIMSurplus Ishapore Enfield 2A .308
I got one a few months back when they were on sale for $99. Haven't shot it yet, but it appears to be functional.
Vincewww.bloomautomatic.com - Golf Ball Launchers for AR-15, SKS, FAL, and many others
www.bloomautomatic.com/lbsc - Long Branch Sportsman's Club, Long Branch, PA
Similar Threads
-
WTS Enfield no4 mk1 303
By pred in forum GeneralReplies: 0Last Post: June 21st, 2008, 01:21 PM -
WTS: Ishapore Lee Enfield, 760 rds 7.62NATO
By St Michael in forum GeneralReplies: 1Last Post: April 22nd, 2008, 01:01 AM -
Lee-Enfield 303 Help
By Holleta in forum GeneralReplies: 14Last Post: August 7th, 2007, 09:00 PM -
WTS/WTT: FTF (PA) Enfield #4mk1, Enfield #1mk3, 91/30mosin 1938
By crowsnest2002 in forum GeneralReplies: 8Last Post: July 12th, 2007, 03:14 PM -
WTS Ishapore Enfield 2A1 7.62mm + bayonet $199.99-WC area
By PA Rifleman in forum GeneralReplies: 0Last Post: February 3rd, 2007, 04:36 PM
Bookmarks