Results 1 to 5 of 5
Thread: Ar trigger group
-
January 28th, 2016, 01:37 PM #1Active Member
- Join Date
- Aug 2011
- Location
-
S,
Pennsylvania
(Delaware County) - Posts
- 121
- Rep Power
- 1962
Ar trigger group
Does anyone have a good source for mil spec trigger groups? I'm planning on doing a few dual stage conversions and need a cheap source for hammer, trigger, and disconnector. Any ideas?
-
January 29th, 2016, 10:05 AM #2
Re: Ar trigger group
One of your best bets is the AR 15 .com Equipment Exchange. Constantly $20 and below groups on the used lower parts section from people swapping.
I always sleep with my guns when you are gone
-
January 29th, 2016, 07:02 PM #3Active Member
- Join Date
- Aug 2011
- Location
-
S,
Pennsylvania
(Delaware County) - Posts
- 121
- Rep Power
- 1962
Re: Ar trigger group
I still can't believe every source I use is out of stock. Thank you for the info, I will check it out.
-
February 1st, 2016, 11:53 AM #4
Re: Ar trigger group
Just saw this thread. I'm a big fan of KAK Industries...they produce parts for many AR15 companies. Their LPK are the very best that I ever bought, and I've bought a few over the years.
http://www.kakindustry.com/ar-15-par...wer-parts-kits
They offer discounts if you buy in bulk as well.
ETA: How many triggers, hammers, disconnectors do you need? I have some that I'm not using. I'm in Pottstown. You can have them, but you pay for shipping or you come to me to pick them up. Just send me a PM.Last edited by aubie515; February 1st, 2016 at 12:04 PM.
-
February 25th, 2016, 06:09 PM #5Super Member
- Join Date
- Jul 2008
- Location
-
Springtown,
Pennsylvania
(Bucks County) - Posts
- 781
- Rep Power
- 3050561
Re: Ar trigger group
Greetings,
I have several that were either installed and used very briefly or not at all. I've replaced all the mil type FCGs in my ARs with some different Geislee versions. Happy to send you a set for the postage costs or stop by if you're in Upper Bucks. Shoot me a PM if I can help.
Regards, Jim
Similar Threads
-
New LC9 Trigger Group
By Mr.357 in forum GunsmithingReplies: 2Last Post: June 15th, 2014, 02:00 AM
Bookmarks