Results 1 to 10 of 11
Thread: Ak 47 barrel threading
-
August 30th, 2015, 10:22 PM #1Banned
- Join Date
- Mar 2015
- Location
-
Hanover,
Pennsylvania
- Posts
- 32
- Rep Power
- 0
Ak 47 barrel threading
Anyone know of a gunsmith in the York area able to thread a barrel? I have an Saiga and I'd like to add a muzzle brake. Thanks!
-
September 3rd, 2015, 06:05 PM #2Active Member
- Join Date
- Feb 2011
- Location
-
Carlisle,
Pennsylvania
(Cumberland County) - Posts
- 172
- Rep Power
- 34831
Re: Ak 47 barrel threading
Try Carlisle Gun Works.They work on AKs carlislegunworks.com
-
September 3rd, 2015, 06:47 PM #3
Re: Ak 47 barrel threading
It isn't made to have the barrel threaded, you need to put a threaded front sight base on it.
-
September 4th, 2015, 09:07 AM #4Active Member
- Join Date
- Feb 2011
- Location
-
Carlisle,
Pennsylvania
(Cumberland County) - Posts
- 172
- Rep Power
- 34831
Re: Ak 47 barrel threading
I had my threaded by Carlisle Gun Works. Mike put a 74 flashhider on mine.It didn't have any threads on it
-
September 4th, 2015, 09:32 AM #5
Re: Ak 47 barrel threading
One of the members on AKFiles was lending his threading tools to the guys on the forum, just for this purpose. I had never threaded a barrel before and once the tools came my way, I threaded one barrel and checked the threads and made sure it was aligned.
I subsequently threaded the other two barrels. These were Chinese rifles and not much room to play with, but it was enough to thread.
-
September 4th, 2015, 12:46 PM #6Grand Member
- Join Date
- Jan 2013
- Location
-
Berks County,
Pennsylvania
(Berks County) - Posts
- 3,334
- Rep Power
- 21474851
Re: Ak 47 barrel threading
-
September 4th, 2015, 01:02 PM #7
Re: Ak 47 barrel threading
Easiest thing to do would be to install a 74 front sight base with 24mm threads since the factory saiga sight base is in the same position.
For 14mm threads you will need an akm front sight or trim the shroud off of your sight base and drill for detent pin, then repin farther toward the end of the barrel.
There was a batch of 7.62x39 saigas a few years back that had 14mm threads under the shroud, you might get lucky.
-
September 4th, 2015, 04:56 PM #8
-
September 4th, 2015, 05:30 PM #9Grand Member
- Join Date
- Jan 2013
- Location
-
Berks County,
Pennsylvania
(Berks County) - Posts
- 3,334
- Rep Power
- 21474851
Re: Ak 47 barrel threading
Forgive my prior post. Don't know how I missed that this was a Saiga
And you are correct, but I just assumed the OP was looking for the AKM look since he asked about barrel threading. I would personally go the threaded FSB route as you and others have suggested. Depends on what he wants though. And if he threads the barrel, the Saiga FSB has no detent pin anyway, correct?
-
September 6th, 2015, 09:54 PM #10
Re: Ak 47 barrel threading
Would this work for you? Press and pin.
http://www.jmac-customs.com/products...ead-conversion
IMG_5641_grande.jpg
Similar Threads
-
barrel threading ?
By davem in forum GunsmithingReplies: 4Last Post: March 22nd, 2015, 07:31 AM -
Barrel threading T/C
By phill in forum GunsmithingReplies: 2Last Post: February 6th, 2013, 11:23 PM -
Barrel Threading anyone?
By Woof Woof in forum PistolsReplies: 0Last Post: November 3rd, 2012, 04:00 PM -
barrel threading
By diputs in forum GeneralReplies: 0Last Post: December 16th, 2009, 10:06 AM -
Barrel threading?
By spabula in forum GeneralReplies: 4Last Post: December 5th, 2008, 06:41 PM
Bookmarks