Results 1 to 2 of 2
Thread: Cylinder's locking up
-
August 29th, 2015, 07:11 PM #1Junior Member
- Join Date
- Aug 2015
- Location
-
Stroudsburg,
Pennsylvania
(Monroe County) - Posts
- 16
- Rep Power
- 0
Cylinder's locking up
Ok sent my heritage rough rider 22cal to heritage to get a new firing pin put in,also told them to check why my new cylinder from them was locking up.ok got gun back new firing pin great.But now not any of my three cylinders will work in the gun all three lock up.So I think they didn't do shit except for the firing pin they told me my cylinder was worn and they replaced it not true it was a brand new cylinder never fired.So maybe a real gunsmith or someone here can tell me what they think.Also I replaced the cylinder arm and spring so everything is new.
-
August 29th, 2015, 08:59 PM #2Grand Member
- Join Date
- Nov 2006
- Location
-
Welfaristan.,
Pennsylvania
- Posts
- 1,569
- Rep Power
- 16548866
Re: Cylinder's locking up
if theyre all locking up it's more than likely your cylinder stop is out of spec, dirty, or the spring is worn out.
These are fairly simple guns so finding the culprit isn't that hard.a slow death awaits you,but not before love reminds you that there is good in you
Similar Threads
-
Bent Locking Block pin on G17
By Yoder in forum PistolsReplies: 3Last Post: May 11th, 2010, 02:35 PM -
KT P32 slide not locking back
By rwb1500 in forum PistolsReplies: 2Last Post: April 1st, 2010, 04:12 PM -
Suggestion: Thread Locking
By MiniDevil in forum GeneralReplies: 20Last Post: January 7th, 2007, 10:35 PM
Bookmarks