Yankee Hill Rail question

[wheeling365]

I have a few AR's that have the Yankee Hill Free Float rails on them. Does anyone know if you can use the regular AR barrel wrench with the 3 pins to install and remove the Yankee Hill barrel nut? I had one come loose over the weekend and wasn't sure if I needed to drop $40 on their special wrench or if the standard AR style will work correctly.

I know I could just take it apart and try but I'd rather not have the gun laying in pieces for days if the normal wrench isn't going to work.

[AHelm3]

Yeah you should still be able to install it. I just used a typical wrench when installing mine. Its the lock ring that their tool helps with.

[wheeling365]

Ahelm3 thanks for the reply. Just to make sure I'm following you 100% here. Your saying that the regular 3 finger/pin barrel wrench does fit just fine? The lock ring I'm not as concerned about. I have some spanner wrenches that should work.

[AHelm3]

Correct. That is how I installed mine at least.

[wheeling365]

Awesome. Thank You.