Results 1 to 10 of 25
Thread: My new Palmetto PA10
-
February 18th, 2015, 02:39 PM #1Member
- Join Date
- Jan 2013
- Location
-
Lancaster,
Pennsylvania
(Lancaster County) - Posts
- 64
- Rep Power
- 679615
My new Palmetto PA10
I bought a complete lower several months ago and was going to build an upper to my likings. As I found out quickly, the parts added up more than I realized. I was hesitant to buy a PA10 upper from PSA but they recently had a sale with free shipping so I took a gamble. The upper literally came in 4 days which is unheard of from PSA. It mated beautifully to my PA10 lower and the action was smooth as silk (without any ammo). I loaded a pmag with Federal 7.62x51 149gr ammo and cycled a few rounds in and out. The bolt was stuck after the second round. I had to do the old "slam the buttstock on the ground trick" to break it free. I wanted to see if it would fire properly so I took it outside and fired 4 rounds without any issue. Again, the live round would not manually eject from the chamber. I had to slam the buttstock on the ground again. I had it lubed with Remoil. Im going to try a thicker lube and see if that helps. Here is one pic of it. Has UTG Tactical Bypod, UTG 1" riser, and a 6-24x50 cheap scope that worked awesome on my 556 AR. And to my surprise, my CTR Mil-Spec stock from my 556 fit on as well.
-
February 18th, 2015, 04:53 PM #2
Re: My new Palmetto PA10
Remoil is good for lubing squeaky doors and shit around the house. Not so much on firearms
I always sleep with my guns when you are gone
-
February 18th, 2015, 06:22 PM #3Active Member
- Join Date
- Apr 2008
- Location
-
Bethlehem,
Pennsylvania
(Northampton County) - Posts
- 221
- Rep Power
- 2584221
Re: My new Palmetto PA10
Try a chamber brush. Sounds like there is some sort of "newness" that needs to be cleaned out of the chamber. Good Luck!
Smit
-
February 18th, 2015, 11:18 PM #4
Re: My new Palmetto PA10
Chamber brush on a drill.
Any vote for a third party is a vote for a Democrat. You are the enemy.
-
February 18th, 2015, 11:38 PM #5
-
February 19th, 2015, 01:16 AM #6
-
February 19th, 2015, 01:31 AM #7
-
February 19th, 2015, 02:31 AM #8
-
February 19th, 2015, 06:44 AM #9Member
- Join Date
- Jan 2013
- Location
-
Lancaster,
Pennsylvania
(Lancaster County) - Posts
- 64
- Rep Power
- 679615
Re: My new Palmetto PA10
I ordered an ar10 chamber brush and cleaning kit off amazon along with a couple bottles of Seal 1. Its coming today after work which should do the trick. I plan on really testing it out this weekend. I have several different types of ammo to work with. I will be happy if I can manage 2" groups at 100yrds.
-
February 19th, 2015, 08:26 AM #10
Similar Threads
-
Palmetto State Armory
By ToddWY in forum ShopsReplies: 31Last Post: March 22nd, 2017, 06:39 PM -
PSA PA10 build?
By shapiro1321 in forum RiflesReplies: 8Last Post: November 8th, 2014, 02:59 AM -
$9.95 PMags at Palmetto
By 39flathead in forum GeneralReplies: 7Last Post: November 28th, 2009, 02:38 AM
Bookmarks