Results 1 to 9 of 9
Thread: Sig Armorer
-
October 28th, 2014, 03:38 PM #1
Sig Armorer
Hi, I am looking for a certified Sig Armorer in the Chambersburg area. I'll travel an hour or so in any direction. Can anyone recommend one?
Thanks.
-
October 28th, 2014, 04:02 PM #2
Re: Sig Armorer
What are you looking to have done?
"Remember the first rule of gunfighting ... have a gun." Jeff Cooper
-
October 28th, 2014, 05:18 PM #3
Re: Sig Armorer
Well, I'll be picking a P6 in a little over a month and I wanted to look into a trigger job and overall inspection to make sure things were in working order. I could just go ahead and get a lighter mainspring, but I want to avoid light strikes.
-
October 28th, 2014, 06:28 PM #4
Re: Sig Armorer
P6 = reworked P225 to German police specs. Heavier main spring and different hammer. Otherwis , it's the same gun. Put in a 225 main spring. If you want, I have a video that shows the step by step breakdown and assembly of the P series pistols.
Soap Box - Worn out : Ballot Box - Broken : Jury Box - Pending : Ammunition Box - Unknown
-
October 28th, 2014, 06:51 PM #5
-
October 31st, 2014, 10:16 AM #6Active Member
- Join Date
- Feb 2011
- Location
-
Carlisle,
Pennsylvania
(Cumberland County) - Posts
- 172
- Rep Power
- 34831
Re: Sig Armorer
Carlisle Gun Works I would give them a call 717-254-6701.
carlislegunworks.com
-
October 31st, 2014, 10:31 AM #7
Re: Sig Armorer
Thanks, Grillman. I'll check them out
-
October 31st, 2014, 10:49 AM #8
Re: Sig Armorer
Check out www.grayguns.com . Also to: www.sigforum.com
Outstanding reputation for their work on SIG's at Gray Guns.FUNDAMENTALS
"All that is needed for Evil to Prevail is for Good Men to
do Nothing"
-
October 31st, 2014, 10:58 AM #9
Similar Threads
-
S&W M&P Armorer
By ran in forum GunsmithingReplies: 0Last Post: March 10th, 2014, 08:19 PM -
AR Armorer's Course
By fightorflightdavid in forum GunsmithingReplies: 6Last Post: October 1st, 2013, 10:56 PM -
Looking for a Sig Armorer in York
By bigjrk in forum GeneralReplies: 2Last Post: June 4th, 2012, 10:15 PM -
AR-15/M-16 Armorer's Course
By PeteG in forum Training CoursesReplies: 0Last Post: March 29th, 2010, 01:05 PM -
GKOCK ARMORER
By gunfixer199 in forum GeneralReplies: 0Last Post: December 19th, 2009, 11:08 AM
Bookmarks