Results 1 to 10 of 15
-
September 20th, 2014, 09:51 AM #1Member
- Join Date
- Jan 2013
- Location
-
Lancaster,
Pennsylvania
(Lancaster County) - Posts
- 64
- Rep Power
- 679615
Anyone try PSA's AR-10 Lowers/Uppers??
If anyone has experience with Palmetto State's Ar-308 platform rifles, please chime in. I must have added their complete AR-10 lower to my cart 5 times over the last week but have been too much of a coward to check out.. I've had several PSA AR15's with very few issues. I figure, for a couple hundred dollars less than bigger named manufacturers, I can have a very sweet looking setup.
Lower Link:
http://palmettostatearmory.com/index...-receiver.html
Upper Link:
http://palmettostatearmory.com/index...category/4387/
This is under $1000 for a complete rifle, shipped..
-
September 20th, 2014, 08:04 PM #2Active Member
- Join Date
- Jul 2012
- Location
-
Orwigsburg,
Pennsylvania
(Schuylkill County) - Posts
- 196
- Rep Power
- 2674725
Re: Anyone try PSA's AR-10 Lowers/Uppers??
I'm interested in this as well. I've had great luck with PSA stuff over the years, but I don't have the cash to build a rifle right now.
-
September 20th, 2014, 11:47 PM #3
Re: Anyone try PSA's AR-10 Lowers/Uppers??
Will PSA ever come out with a complete AR-10 rifle I can buy from them?
Sanity, yours if you can keep it.....
-
September 21st, 2014, 12:09 AM #4Grand Member
- Join Date
- Dec 2011
- Location
-
Where the amish roam,
Pennsylvania
(Lancaster County) - Posts
- 2,812
- Rep Power
- 21474851
Re: Anyone try PSA's AR-10 Lowers/Uppers??
Never had any problems with PSA 's rifles I would say it's a safe bet.
-
September 21st, 2014, 08:44 AM #5
-
September 21st, 2014, 08:57 AM #6
Re: Anyone try PSA's AR-10 Lowers/Uppers??
"It's hard to imagine a more stupid or more dangerous way of making decisions than by putting those decisions in the hands of people who pay no price for being wrong."
Thomas Sowell
-
September 21st, 2014, 09:33 AM #7
Re: Anyone try PSA's AR-10 Lowers/Uppers??
I'm already putting mine together using Aero Precision receivers, Mega Arms barrel, and Samson rail. It's costing quite a bit more than this PSA rifle and quite a bit more than I originally thought...but that's the way it always goes. It'll look good with a can on the end. It better shoot as good as it looks.
-
September 21st, 2014, 10:43 AM #8Member
- Join Date
- Jan 2013
- Location
-
Lancaster,
Pennsylvania
(Lancaster County) - Posts
- 64
- Rep Power
- 679615
Re: Anyone try PSA's AR-10 Lowers/Uppers??
The upper in the link that I posted, looks exactly like the one I bought from them but in 556 form but with a 1/7 twist. Same hand guard and stainless barrel.
I had issues with it right from the start. First, the gas tube was loose and was only firing in single shot form. After that issue was solved, I had issues with spent casings getting stuck in the chamber. The ammo was federal american eagle 5.56. Sometimes the casings got stuck so badly, I had to spray gun oil down the barrel and let it sit for a few hours before the round could be kicked out with a cleaning rod.
This has been the ONLY issue I've had with any of their uppers, and its weird because it was the most expensive upper I've purchased from PSA.
This is the only reason for not jumping on this right now. If they threw up a free shipping code (like the occasionally do) I'd jump on it in a second. They have great deals on AR parts/accessories and even ammo. But for each item you buy, add another $17 for shipping. I even called and asked if they could group shipping and they said no.
-
September 21st, 2014, 02:50 PM #9
Re: Anyone try PSA's AR-10 Lowers/Uppers??
I have purchased two ar15 uppers from them with no issue. I have been hearing mixed reviews on the PSA AR10 rifles and components.
This thread from ar15.com references issue experienced with a Geissele trigger and PSA's AR10 upper. Even though the price looks good I myself am rather hesitant to go the 10 route with them, especially it being my 1st one, without possible issues like these being worked out.
http://www.ar15.com/forums/t_2_301/2...T_working.html
-
September 21st, 2014, 08:28 PM #10
Similar Threads
-
In stock lowers, uppers, etc
By tigermagnum in forum RiflesReplies: 0Last Post: December 20th, 2012, 04:59 PM -
AR-15 Uppers/Lowers
By WildGoat in forum GeneralReplies: 0Last Post: January 15th, 2009, 03:24 PM -
AR-15 Uppers/Lowers
By WildGoat in forum GeneralReplies: 0Last Post: January 15th, 2009, 03:23 PM -
Uppers, lowers and parts. Oh my!
By tec in forum GeneralReplies: 8Last Post: June 9th, 2008, 02:15 PM
Bookmarks