Results 1 to 10 of 34
Thread: Glock, Gen 4, Mod 19
-
June 13th, 2014, 08:26 PM #1Active Member
- Join Date
- Jan 2013
- Location
-
Parrish,
Florida
- Posts
- 233
- Rep Power
- 372213
Glock, Gen 4, Mod 19
OK, here's your chance to throw in your favorite goodies.
Have shot for many years. Rifles, revolvers, shotguns, pistols.
Just got my first Glock, the one shown above.
What's your favorite:
Holster?
Site?
Other goody that you can't live without?
Sgt Steve
-
June 13th, 2014, 08:42 PM #2
Re: Glock, Gen 4, Mod 19
My EDC gun since 2005 has been a Glock 19;
Favorite holster: Kramer horsehide OWB belt scabbard (been using these holsters since the early 90s - to include for plain clothes work for a few years)
Favorite IWB holster (for those times that I want/need more concealment): Milt Sparks SSII or Comp-Tac CTAC.
Belt: I use either a Galco "COP" belt 1 1/2" or a Blade-Tech belt also 1 1/2", I do have a Kramer sharkskin 1 1/4" "dress" belt for slacks etc....
Mag Pouch: I always carry a single off side mag pouch. I use a Kramer or Comp Tac pouch.
Favorite Sights: Warren Tacticals, front sight has a tritium insert, rear sights are plain black. Switched to these a few years ago - VERY fast front sight pick up. (Before this I had always used either Trijicons or Mepro 3 dot night sights).Tomorrow's battle is won during today's practice.
-
June 13th, 2014, 09:08 PM #3
Re: Glock, Gen 4, Mod 19
My EDC is a Glock 19, Gen 3.
Favorite holster: TT Gunleather DDOX OWB: (brown w/sharkskin trim): http://www.mcssl.com/store/a9856d0de...b1c8431866ca78
Holster that gets used more since I started working at a firm that requires me to dress nice: Crossbreed Super Tuck IWB w/Combat Cut http://www.crossbreedholsters.com/SuperTuckDeluxe.aspx
Belt: A Filson double bridle belt or a similar one made by LL Bean that seems to have been discountinued. One's black, one's brown. http://www.filson.com/products/1-1-2...aProduct=1011/
Mag/light Pouch: TT Gunleather Mag/Light combo (brown, with sharkskin trim) http://www.mcssl.com/store/a9856d0de...435d1511b1c6c5
Sights: Novak plain black rear sight, Glock Tritium front sight:
http://novaksights.com/products/sigh...els/glock.html
http://www.midwayusa.com/product/623...-black-tritium
(Word to the wise: if you buy a Novak rear sight, just send your slide to them to have it installed. The gunsmith I went to didn't really know how to install them and ended up dinging them up a bit.)
Other goodies:
Glock +2 Magazine Extension http://www.glockmeister.com/GLOCK-Pl...tinfo/G7151-2/
Glock 17 trigger (smooth face, as opposed to the stock G19 grooved trigger) http://www.glockmeister.com/GLOCK-OE...ductinfo/G357/
Vickers Extended Magazine release: http://www.brownells.com/handgun-par...003404_d_10729
Extended slide stop lever: http://www.glockmeister.com/Glock-Ex...uctinfo/G7496/Last edited by Johannes_Paulsen; June 13th, 2014 at 09:10 PM.
-
June 14th, 2014, 06:23 AM #4Grand Member
- Join Date
- Mar 2011
- Location
-
mechanicsburg,
Pennsylvania
(Cumberland County) - Posts
- 1,243
- Rep Power
- 8954928
Re: Glock, Gen 4, Mod 19
I like galco leather myself. a sob or jack slide works well. a 3.5 connector, extended slide stop and after market sights of your choice. no major changes for me. happy shooting.
-
June 14th, 2014, 12:21 PM #5
Re: Glock, Gen 4, Mod 19
I really like my phlster holster, ameriglo sights and I'm in the market for a new mag holder.
I could also add that I really like the vickers tactical slide release and it's pictured with the glock extended mag release but I also have a vickers version on order as well. The stippling was done by a friend who did an awesome job and also undercut the triggerguard.Last edited by smoke-wagon; June 14th, 2014 at 01:13 PM. Reason: Info added
Go head, skin it. Skin that smoke wagon and see what happens.
-
June 14th, 2014, 09:32 PM #6Active Member
- Join Date
- Jan 2013
- Location
-
Parrish,
Florida
- Posts
- 233
- Rep Power
- 372213
Re: Glock, Gen 4, Mod 19
Lots of good input. I think my first acquisition will be a holster. I like the Hume JIT. What about the Glock holsters?
And I still argue with myself on Owb VERSUS IWB.
TRITIUM ON THE FRONT IS A BIG PLUS.
Hey I'm using a new Surface computer and it's giving le a hard time!
Now I'LL bore you to death...on this connector stuff...update me. What is 'the stock connector in the 19?
Any spring change?
Now on the initial trigger movement we're actually moving the firing pin rearward right?
I've used skate board tape in the past on my XD 45 ACP.
Sgt Steve
-
June 14th, 2014, 09:53 PM #7
Re: Glock, Gen 4, Mod 19
Great choice. When I carry a 19, it's usually in a Crossbreed Supertuck. As far as sights are concerned, I'm a big fan of Truglo TFOs. Other than that, I don't do anything else with it besides use it to turn money into noise.
There's no such thing as a free lunch.
-
June 14th, 2014, 10:03 PM #8
Re: Glock, Gen 4, Mod 19
My EDC is a 23. I prefer .40 over 9.
G23 Gen4
3.5# connector, Glock factory night sights (pic is from when I had Ameriglo I-Dot Pros in there, I put the same 3 dot Glock night sights in all my Glocks during the Glock day event at King's, decided to have them all match)
The pouch on the left holds my Gerber multi-tool, an LED AA Maglite and a 22 round magazine, with the + baseplate.
The holster is a Blade Tech IWB, I also use a Blade Tech belt.
I will also be adding a 27 in ankle carry in the relatively near future, just need to get to the range with it some more first.
-
June 14th, 2014, 10:14 PM #9
Re: Glock, Gen 4, Mod 19
I like the Safariland 6378 ALS paddle holster. G19 is my everyday carry
-
June 14th, 2014, 11:45 PM #10
Re: Glock, Gen 4, Mod 19
I like my galco kingtuk and galco instructors belt. The belts come in carrying thickness and width and you can get one with a polymer insert for added strength. They are strong enough without that though.
-=pardon me while I burn and rise above the flames=-
Similar Threads
-
WTS: GLOCK 36 CARRY PACKAGE, GLOCK 36,45 CAL/ W-LASERMAX, NIGHT SIGHTS,HOLSTER,PGH.PA
By sams819 in forum GeneralReplies: 3Last Post: September 13th, 2007, 10:19 AM
Bookmarks