Results 61 to 70 of 100
Thread: 585 HE -- Cases In Production --
-
May 11th, 2018, 12:01 AM #61Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Here is sectioned 585 HE case in the middle, we first made from
another case, years ago before we had factory run of brass and
it had perfect thickness on the sides and inside corrner.
We could fire them many times without sides thinning..
First case is factory run of our 585 HE, 3rd is case that is too
thick of sides and sticks at high pressures..
Pic of our factory run cases necked down to 375 and fired 4 times
at high pressure on the right, with unfired case on the left.
Our case is not perfect but does work...Ed
-
July 9th, 2018, 11:17 PM #62Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
About 416 cal bullets............
The heaviest 550 gr for Extreme ELR probably be best 8 to 1 twist , in 416 caliber bullet,
and 520 gr 9.5 to 1, and 470gr 10 to one, Some barrels I picked up are 10 to 1.......
Now a novel idea is to lighten rear of bullet with small shallow hole drilled in base, might do better
long range.which would allow 10 to one barrel stabilize the heavier 550 gr bullets for ELR.
Making bullet nose heavier makes it more stable in flight, needing less spin,
like our hollow base 585 cal minie bullets only need 48 to 1 twist, or less
while out regular 585 bullets need about 24 to 1 to stabilise them..............
The winner of the King Of 2 Mile shoot last week was using 416 Barrett with a 1 to 10
twist, with a 500 gr CEB Lazer bullet, ...Robert Brantley, with Manners Stocks....
Paul Philips was third with a 416...
GOOD NEWS-- There is now an importer and seller of our 585 HE brass getting set up here,
in US, hopefully will be in stock, few weeks........ http://bertrambrass.com .. .. Caleb Hallet..
Have got another intermediate size action besides the Montana PH our guys working on,
to do speed testingwith. It is big long REM style action that can take our 416 HSM, ED
-
July 11th, 2018, 05:24 PM #63Banned
- Join Date
- Aug 2011
- Location
-
North West,
Pennsylvania
(Erie County) - Posts
- 1,537
- Rep Power
- 0
Re: 585 HE -- Cases In Production --
Don't understand what it is but it looks cool.
-
July 25th, 2018, 01:38 AM #64Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Experimental intermediate size action with the Montana PH, for comparison.
It is an experimental action for our 416 HSM, to do our speed testing with
and get a better action than Cheytac size actions, for bigger case ELR use,
without going all way up to more expensive, huge actions.
It is big long round style action that can take our 416 HSM, almost
1.6" diameter action and .800" bolt, with locking lugs nearly as big as most
BMG actions.... ED
-
August 15th, 2018, 08:39 PM #65Member
- Join Date
- Apr 2010
- Location
-
The Ark,
Indiana
- Posts
- 98
- Rep Power
- 5933165
Re: 585 HE -- Cases In Production --
Every time I look at that brass the thoughts of a break over shotgun rebarreled to shoot minies just naturally come to mind.
-
September 19th, 2018, 03:51 AM #66Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Minies are great for deer and bear with power behind them..
Here is picture of the bolt from the experimental action,
with our 416 HSM case in it. Note the amount of the
base size of locking lugs, the amount of area on the bolt..
Here is link to guy doing special 585 HE in the EU,
Good pictures............www.585he.cz
We tested intermediate action with a 700HE barrel we had here.
Just temporary to test strength. 1000 gr over 3100..
Action worked fine.. Ed.
-
October 20th, 2018, 10:57 PM #67Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Here is video of early water barrel test of the
12ga From Hell, from years ago.
https://www.youtube.com/watch?v=c48zTpsgbuk
Here is picture from that video..
Here is the intermediate size action for 416 HSM with test barrel, .Ed
-
December 6th, 2018, 04:50 AM #68Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
In 416 HSM got a 415 gr long target bullet 3800,
with plain barrel, no brake, on intermediate action,
Our 416 HE gets same 415gr bullet to 3300.Ed
-
January 3rd, 2019, 08:00 AM #69Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Here is picture of our 416HSM cases with screw in shellholders,
for Ammomaster, etc, and slip in shellholders for regular presses
Also have some for big LEE Classic and Smart Reloader presses..
A 378 WEA MAG in picture for comparison...
Second is stacks of 416 HSM, about a third fireformed
and the rest to be fireformed... So far total about 1700, Ed
-
February 7th, 2019, 07:29 PM #70Active Member
- Join Date
- Jun 2009
- Location
-
Brinton,
Michigan
- Posts
- 185
- Rep Power
- 504413
Re: 585 HE -- Cases In Production --
Bob Snapp, 90, the great Gun Craftsman, of
Clare, Michigan, passed away Jan 28th....
He was an esteemed member of the
American Custom Gunmakers Guild,
Being its president in 1992..He liked
working with Martini Cadet singleshot rifles
.Worked with guys testing armor long time ago.
Maybe the 1st to do 20mm necked down to 50cal
We lost a great friend,,,Ed
Similar Threads
-
Marking cases
By WVneighbor in forum Ammunition & ReloadingReplies: 18Last Post: February 21st, 2013, 10:52 PM -
Bent 40s&w cases
By originalsocko in forum Ammunition & ReloadingReplies: 6Last Post: January 2nd, 2011, 12:18 PM
Bookmarks