Results 1 to 10 of 12
Thread: ruger sr40c problems
-
February 26th, 2012, 05:45 PM #1Member
- Join Date
- May 2011
- Location
-
york,
Pennsylvania
(York County) - Posts
- 31
- Rep Power
- 0
ruger sr40c problems
brought my brand new sr40c, home,cleaned it, loaded the mags and right off the bat had problem with mags not seating then finally get them to seat,racked the slide and it jammed.tried this repeatidly till there was only 4 rounds in the mag (each mag,same problem) then it finally fed into the chamber,never been fired mind you.im calling ruger tomorrow but any suggestions before then ?
-
February 26th, 2012, 06:11 PM #2Member
- Join Date
- Nov 2011
- Location
-
Honey Brook,
Pennsylvania
(Chester County) - Posts
- 97
- Rep Power
- 354
Re: ruger sr40c problems
I've heard some rumblings about Ruger needing to replace some mag disconnects in the past that caused a problem like this. Also there was an issue with trigger reset upon firing... you could try removing the magazine disconnect (it's an unnecessary safety feature anyway, in my opinion) and see if that fixes the issue. If it does and you still want the magazine safety, at least you know which part to have Ruger replace.
The Army was the biggest mistake I've ever been proud to make.
-
February 26th, 2012, 08:20 PM #3Super Member
- Join Date
- Apr 2007
- Location
-
Orange (Formerly York, PA),
Virginia
- Age
- 60
- Posts
- 865
- Rep Power
- 4598
Re: ruger sr40c problems
Axell,
Before you remove the Magazine Disconnect - Call Ruger and let them fix it. I do believe removing/altering anything on the gun, Voids the Factory Warranty.
It's New, Let them fix it.
TJBRecoil Happens
-
February 26th, 2012, 08:33 PM #4Member
- Join Date
- Nov 2011
- Location
-
Honey Brook,
Pennsylvania
(Chester County) - Posts
- 97
- Rep Power
- 354
-
September 11th, 2013, 11:47 AM #5Banned
- Join Date
- Sep 2013
- Location
-
Dobbs Ferry,
New York
- Age
- 50
- Posts
- 83
- Rep Power
- 0
Re: ruger sr40c problems
I'm in the process of obtaining my NYS pistol permit and want to get the Ruger SR40c pistol, since it will accept the same .40 caliber mags from the Ruger PC4 carbine I already own. Is it a good buy, as I was told by my FFL that it's a good buy and got nothing but good feedback from everyone? I don't know what magazine issues you folks are having with it, but the people I've spoken to have not experienced such issues before.
-
September 11th, 2013, 04:07 PM #6
Re: ruger sr40c problems
Russky,
I own and carry the SR40c. I have about 800 rds through it with only 2 jams. They both were caused by Tula Brass ammo. I removed the ammo from the mag and never had another issue.
-
September 11th, 2013, 07:29 PM #7Banned
- Join Date
- Sep 2013
- Location
-
Dobbs Ferry,
New York
- Age
- 50
- Posts
- 83
- Rep Power
- 0
Re: ruger sr40c problems
-
September 11th, 2013, 08:30 PM #8Active Member
- Join Date
- Mar 2013
- Location
-
Manheim, PA 17545,
Pennsylvania
(Lancaster County) - Posts
- 239
- Rep Power
- 1099223
Re: ruger sr40c problems
My SR9C (the 9mm version of your gun...) has been flawless for me. It sounds like you've got an issue. Call Ruger and have them handle the issue. They will be more than willing to make sure your gun is right and reliable for you.
-
September 11th, 2013, 09:08 PM #9
-
September 13th, 2013, 01:55 PM #10
Re: ruger sr40c problems
Sorry to hear this. I own two SR's . My wife and I both carry and both guns have 1000 rounds through each with no problems. Ruger will fix it. I love the gun and would recomend it to anyone.
.”Firearms are second only to the Constitution in importance" George Washington
Similar Threads
-
Ruger SR40c Guiderod question
By Smokin in forum PistolsReplies: 10Last Post: September 16th, 2012, 08:40 PM -
Ruger SR40C holster
By snappertrapper in forum PistolsReplies: 1Last Post: September 1st, 2011, 11:27 AM -
RUGER SR40c
By StingyGunner in forum PistolsReplies: 4Last Post: July 20th, 2011, 08:45 PM
Bookmarks